Date: Wed, 15 Mar 2000 00:30:04 -0600 (CST) From: Raul Zighelboim <raul@zighelboim.com> To: Randall Hopper <aa8vb@ipass.net> Cc: Roger Hardiman <roger@cs.strath.ac.uk>, multimedia@freebsd.org Subject: Re: FXTV and Haupage WinTV. Message-ID: <Pine.BSF.4.10.10003150028310.93089-100000@rodia.zighelboim.com> In-Reply-To: <20000314231024.B4692@ipass.net>
next in thread | previous in thread | raw e-mail | index | archive | help
I suspect an issue with XFree84 4.0. I tried an STB PVI TV card + S3Virge and got similar result: - FXtv nevers displays. On the positive side, with the S#V drivers, the system does not crash :-) On Tue, 14 Mar 2000, Randall Hopper wrote: > > Hmmm. I'm scratching my head trying to figure out why root would make any > difference. Permissions on your devices is probably not it (since fxtv > will print an error and terminate if this is the case), or maybe some 4.x > change that I don't know about (I'm running 3.2R & 3.4R). FWIW on my system: > > > ls -l /dev/bktr* /dev/tuner* > crw-r--r-- 1 root wheel 92, 0 Jan 4 21:51 /dev/bktr0 > crw-r--r-- 1 root wheel 92, 16 Jan 4 21:51 /dev/tuner0 > > No probs running as a non-root user. > > Only other significant difference I see is you have quite a different set > of boot-up probes for the driver. Mine are: > > DETECTED CAPTURE CARD(S) [DRIVER PROBES]: > bktr0: <BrookTree 848> rev 0x11 int a irq 9 on pci0.11.0 > bti2c0: <bt848 Hard/Soft I2C controller> > bktr0: Hauppauge Model 56111 C > Hauppauge WinCast/TV, Philips NTSC tuner, dbx stereo. > > Maybe a card-related driver issue. Roger will be more likely to know for > sure (Ccing him on this reply). > > Randall > > > Raul Zighelboim: > | > |Hello there; I just got a Haupage wintv card. When launching fxtv (as > |user root) my system will crash. As nont riit user, nothing happens, (ie, > |a wintv window is not displayed). > | > |How do I get this to work ? > | > | thanks. > | > |Here are some outputs: > |--- fxtv -debug startup > |--- dmesg | grep 'tv card related output' > | > |Fxtv v1.02 > | > |DETECTED CAPTURE CARD(S) [DRIVER PROBES]: > | bktr0: <BrookTree 878> mem 0xf4203000-0xf4203fff irq 15 at device 15.0 > |on pci0 > | using shared irq15. > | bktr0: buffer size 3555328, addr 0x6000000 > | bktr: GPIO is 0x00ffffdb > | bktr0: Hauppauge Model 61381 D123 > | bktr0: Detected a MSP3430G-A1 at 0x80 > | bktr: GPIO is 0x00fffffb > | bktr: GPIO is 0x00ffffdb > | > |SYSCTL MIB VALUES: > | kern.version: FreeBSD 4.0-CURRENT #0: Sun Mar 12 16:48:54 CST 2000 > | mango@rodia.zighelboim.com:/usr/src/sys/compile/RODIA > | > | hw.bt848.card: -1 > | hw.bt848.tuner: -1 > | hw.bt848.reverse_mute: -1 > | hw.bt848.format: -1 > |TUNER SIGNATURE (0x01 - 0xff): > | 00 00 00 01 00 00 00 00 00 00 01 00 02 00 00 00 > | > |TUNER I2C DEVICES FOUND AT: > | 0x30, 0xa0, 0xc2 > | > |CAPTURE CARD EEPROM CONTENTS: > | Read 256 EEPROM bytes (0x00 - 0xff) > | 84 12 00 00 05 50 0e 7f 08 17 23 c5 ef 93 14 91 > | 00 00 00 00 05 84 0a 00 01 01 20 77 00 40 94 19 > | 1b 00 74 02 01 07 03 79 2c 00 00 00 00 00 00 00 > | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > | 00 00 00 00 00 00 00 00 00 00 00 00 13 eb 00 70 > | 84 12 00 00 05 50 0e 7f 08 17 23 c5 ef 93 14 91 > | 00 00 00 00 05 84 0a 00 01 01 20 77 00 40 94 19 > | 1b 00 74 02 01 07 03 79 2c 00 00 00 00 00 00 00 > | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > | 00 00 00 00 00 00 00 00 00 00 00 00 13 eb 00 70 > |SUPPORTED FREQUENCY SETS: > | 1 nabcst > | 2 cableirc > | 3 cablehrc > | 4 weurope > | 5 jpnbcst > | 6 jpncable > | 7 xussr > | 8 australia > | 9 france > | > |Supported RGB Capture Pixel Formats: > | bpp Bpp RGB Masks Swap > | --- --- ---------------------------- ---- > | 15 2 00007c00, 000003e0, 0000001f NB > | 16 2 0000f800, 000007e0, 0000001f NB > | 24 3 00ff0000, 0000ff00, 000000ff B > | 24 4 00ff0000, 0000ff00, 000000ff NBWb > | > |Supported YUV Capture Pixel Formats: > | YUVSize HSamp VSamp Pack CompOrder T->B L->R YTrans > | ------- ----- ----- ------ --------- ---- ---- ------ > | 8,8,8 1,2,2 1,1,1 PLANAR YUV Y Y N > | 8,8,8 1,2,2 1,1,1 PACKED YUYV Y Y N > | 8,8,8 1,2,2 1,2,2 PLANAR YUV Y Y N > |XSERVER: 'The XFree86 Project, Inc' v3360, Protocol Verson 11.0 > | Screen Res = 1024x768, DefDepth = 16; NumScreens = 1 > | Bitmap Unit/BitOrder/Pad = 32/LSBFirst/32, Image ByteOrder = > |LSBFirst > | > |XF86DGAQueryVersion() succeeded - vers = 1.01 > | BaseAddr = 0xfc000000, Pitch = 1024, BankSize/RamSize = > |16646144/16646144 > | > |Rating Available Visuals: > | Rating Class bpp Bpp R,G,B Masks Swap > |DirectVid > | ------ ----------- --- --- ---------------------------- ---- > |--------- > | 5 TrueColor 16 2,2 0000f800, 000007e0, 0000001f -- > |Yes > |Chosen Visual is 16-bpp TrueColor > | > |XF86VidModeQueryVersion() succeeded - version = 0.08 > |-------------------------- > |dmesg | more > |... > |bktr0: <BrookTree 878> mem 0xf4203000-0xf4203fff irq 15 at device 15.0 on > |pci0 > | using shared irq15. > |iicbb0: <I2C generic bit-banging driver> on bti2c0 > |iicbus0: <Philips I2C bus> on iicbb0 master-only > |iicsmb0: <I2C to SMB bridge> on iicbus0 > |smbus0: <System Management Bus> on iicsmb0 > |smb0: <SMBus general purpose I/O> on smbus0 > |iic0: <I2C general purpose I/O> on iicbus0 > |smbus1: <System Management Bus> on bti2c0 > |smb1: <SMBus general purpose I/O> on smbus1 > |brooktree0: PCI bus latency is 132. > |bktr0: buffer size 3555328, addr 0x6000000 > |bktr: GPIO is 0x00ffffdb > |subsytem 0x0070 0x13eb > |bktr0: Hauppauge Model 61381 D123 > |bktr0: Detected a MSP3430G-A1 at 0x80 > |Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner, msp3400c stereo, > |remote control. > |pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 15.1 irq 15 > |bktr: GPIO is 0x00fffffb > |bktr: GPIO is 0x00ffffdb > | > | > | > |To Unsubscribe: send mail to majordomo@FreeBSD.org > |with "unsubscribe freebsd-multimedia" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.10003150028310.93089-100000>