Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 19 May 1998 23:26:08 -0500
From:      Danny Dulai <nirva@ishiboo.com>
To:        freebsd-multimedia@FreeBSD.ORG
Subject:   sound looping and awe64 detection problems
Message-ID:  <19980519232608.51200@bleep.ishiboo.com>

next in thread | raw e-mail | index | archive | help

I am having a couple of problems. My sndstat, pnpinfo, and dmesg output
is at the end of this mesg.

My sound card is a sound blaster awe64 gold pnp.  I did a boot -c and
typed:

pnp 1 0 os enable irq0 5 drq0 1 drq1 5 port0 0x220 port1 0x330 port2 0x388
pnp 1 2 port0 0x620 port1 0xa20 port2 0xe20

The relevent lines in my kernel config are

controller	pnp0
controller      snd0
device sb0      at isa? port 0x220 irq 5 conflicts drq 1 vector sbintr
device sbxvi0   at isa? drq 5
device sbmidi0  at isa? port 0x330
device awe0     at isa? port 0x620 
device opl0     at isa? port 0x388

The -current dist is from mid April (oh yah, this is an SMP system too).

My problem occurs when I cat a .au file to /dev/audio. If I let it go
all the way through, it plays just fine, and exits, and all is good.
however, if I hit ^C and break the cat, the sound card starts looping.
I saw a few posts about looping sound, was any solution discovered? If
I use Luigi's pcm driver, and hit ^C, the machine freezes solid. When
I play a mod file with s3mod and break it in the middle, I get similar
looping/crashing effects.

Also, why can it not find an awe32? (isn't the 64 compatible with a 32?)


-------------------------------------------------------------------------------
dmesg:
------

Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #13: Mon May 18 02:53:15 EDT 1998
    nirva@blookitty.ishiboo.com:/fs/src/freebsd-current/sys/compile/blookitty
Timecounter "i8254"  frequency 1193182 Hz  cost 3031 ns
CPU: Pentium Pro (686-class CPU)
  Origin = "GenuineIntel"  Id = 0x634  Stepping=4
  Features=0x80fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory  = 134217728 (131072K bytes)
avail memory = 127418368 (124432K bytes)
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  1, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  0, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Probing for devices on PCI bus 0:
chip0: <Host to PCI bridge (vendor=8086 device=7180)> rev 0x03 on pci0.0.0
chip1: <PCI to PCI bridge (vendor=8086 device=7181)> rev 0x03 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.4.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.4.1
chip3: <Intel 82371AB USB host controller> rev 0x01 int d irq 9 on pci0.4.2
chip4: <Intel 82371AB Power management controller> rev 0x01 on pci0.4.3
ahc0: <Adaptec aic7880 Ultra SCSI host adapter> rev 0x00 int a irq 19 on pci0.6.0
Illegal cable configuration!!. Only two connectors on the adapter may be used at a time!ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
ahc0: waiting for scsi devices to settle
scbus0 at ahc0 bus 0
ahc0:A:2: refuses WIDE negotiation.  Using 8bit transfers
st0 at scbus0 target 2 lun 0
st0: <ARCHIVE Python 28388-XXX 5.72> type 1 removable SCSI 2
st0: Sequential-Access density code 0x13,  drive empty
ahc0:A:4: refuses WIDE negotiation.  Using 8bit transfers
sd0 at scbus0 target 4 lun 0
sd0: <iomega jaz 1GB G.72> type 0 removable SCSI 2
sd0: Direct-Access 
sd0: ILLEGAL REQUEST asc:24,0 Invalid field in CDB
sd0 could not mode sense (4). Using ficticious geometry
1021MB (2091050 512 byte sectors)
de0: <Digital 21140A Fast Ethernet> rev 0x20 int a irq 19 on pci0.9.0
de0: 21140A [10-100Mb/s] pass 2.0
de0: address 00:40:05:2d:97:09
bktr0: <BrookTree 848> rev 0x12 int a irq 18 on pci0.10.0
Hauppauge WinCast/TV, Philips NTSC tuner.
meteor0: <Philips SAA 7116> rev 0x00 int a irq 17 on pci0.11.0
meteor0: <Philips SAA 7196> rev 0x1
vga0: <Matrox MGA 2064W graphics accelerator> rev 0x01 int a irq 16 on pci0.12.0
Probing for devices on PCI bus 1:
vga1: <Matrox model 051f graphics accelerator> rev 0x00 int a irq 16 on pci1.0.0
Probing for PnP devices:
CSN 1 Vendor ID: CTL009e [0x9e008c0e] Serial 0x09fbdbd9
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: model Generic PS/2 mouse, device ID 0
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <WDC AC31600H>
wd0: 1549MB (3173184 sectors), 3148 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (wd1): <Maxtor 84320D4>
wd1: 4120MB (8438850 sectors), 8930 cyls, 15 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (wd2): <WDC AC33100H>
wd2: 3020MB (6185088 sectors), 6136 cyls, 16 heads, 63 S/T, 512 B/S
wdc1: unit 1 (atapi): <TOSHIBA CD-ROM XM-6202B/1108>, removable, accel, ovlap, dma, iordis
wcd0: 5512Kb/sec, 256Kb cache, audio play, 255 volume levels, ejectable tray
wcd0: no disc inside, unlocked
sb0 at 0x220 irq 5 drq 1 on isa
snd0: <SoundBlaster 16 4.16> 
sbxvi0 at ? drq 5 on isa
snd0: <SoundBlaster 16 4.16> 
sbmidi0 at 0x330 on isa
snd0: <SoundBlaster MPU-401> 
awe0 at 0x620 on isa
AWE32: not detected

opl0 at 0x388 on isa
snd0: <Yamaha OPL3 FM> 
npx0 on motherboard
npx0: INT 16 interface
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via pin 2
SMP: AP CPU #1 Launched!
WARNING: / was not properly dismounted.
de0: autosense failed: cable problem?
PCM device 1 not installed.


-------------------------------------------------------------------------------
/dev/sndstat:
-------------
VoxWare Sound Driver:3.5-alpha15-970902 (Wed Aug  6 22:58:35 PDT 1997 Amancio Hasty@rah.star-gate.com)
Config options: 

Installed drivers: 
Type 1: OPL-2/OPL-3 FM
Type 2: SoundBlaster
Type 6: SoundBlaster16
Type 25: AWE32 Synth
Type 7: SB16 MIDI


Card config: 
SoundBlaster at 0x220 irq 5 drq 1
SoundBlaster16 at 0xffffffff irq 1 drq 5
SB16 MIDI at 0x330 irq 1
AWE32 Synth at 0x620 irq 1
OPL-2/OPL-3 FM at 0x388 irq 1

Audio devices:
0: SoundBlaster 16 4.16

Synth devices:
0: Yamaha OPL-3

Midi devices:
0: SoundBlaster 16 Midi

Timers:
0: System clock

Mixers:
0: SoundBlaster


-------------------------------------------------------------------------------
pnpinfo:
--------

Checking for Plug-n-Play devices...

Card assigned CSN #1
Vendor ID CTL009e (0x9e008c0e), Serial Number 0x09fbdbd9
PnP Version 1.0, Vendor Version 32
Device Description: Creative SB AWE64 Gold

Logical Device ID: CTL0044 0x44008c0e #0
Device Description: Audio
TAG Start DF
Good Configuration
    IRQ: 5  - only one type (true/edge)
    DMA: channel(s) 1 
	8-bit, not a bus master, count by byte, , Compatibility mode
    DMA: channel(s) 5 
	16-bit, not a bus master, , count by word, Compatibility mode
    I/O Range 0x220 .. 0x220, alignment 0x1, len 0x10
	[16-bit addr]
    I/O Range 0x330 .. 0x330, alignment 0x1, len 0x2
	[16-bit addr]
    I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4
	[16-bit addr]
TAG Start DF
Acceptable Configuration
    IRQ: 5 7 9 10  - only one type (true/edge)
    DMA: channel(s) 0 1 3 
	8-bit, not a bus master, count by byte, , Compatibility mode
    DMA: channel(s) 5 6 7 
	16-bit, not a bus master, , count by word, Compatibility mode
    I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
	[16-bit addr]
    I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2
	[16-bit addr]
    I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4
	[16-bit addr]
TAG Start DF
Acceptable Configuration
    IRQ: 5 7 9 10  - only one type (true/edge)
    DMA: channel(s) 0 1 3 
	8-bit, not a bus master, count by byte, , Compatibility mode
    DMA: channel(s) 5 6 7 
	16-bit, not a bus master, , count by word, Compatibility mode
    I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
	[16-bit addr]
    I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2
	[16-bit addr]
TAG Start DF
Acceptable Configuration
    IRQ: 5 7 9 10  - only one type (true/edge)
    DMA: channel(s) 0 1 3 
	8-bit, not a bus master, count by byte, , Compatibility mode
    DMA: channel(s) 5 6 7 
	16-bit, not a bus master, , count by word, Compatibility mode
    I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
	[16-bit addr]
TAG Start DF
Acceptable Configuration
    IRQ: 5 7 9 10  - only one type (true/edge)
    DMA: channel(s) 0 1 3 
	8-bit, not a bus master, count by byte, , Compatibility mode
    I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
	[16-bit addr]
    I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2
	[16-bit addr]
    I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4
	[16-bit addr]
TAG Start DF
Acceptable Configuration
    IRQ: 5 7 9 10  - only one type (true/edge)
    DMA: channel(s) 0 1 3 
	8-bit, not a bus master, count by byte, , Compatibility mode
    I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
	[16-bit addr]
    I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2
	[16-bit addr]
TAG Start DF
Acceptable Configuration
    IRQ: 5 7 9 10  - only one type (true/edge)
    DMA: channel(s) 0 1 3 
	8-bit, not a bus master, count by byte, , Compatibility mode
    I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
	[16-bit addr]
TAG Start DF
Sub-optimal Configuration
    IRQ: 5 7 9 10  - only one type (true/edge)
    DMA: channel(s) 0 1 3 
	8-bit, not a bus master, count by byte, , Compatibility mode
    DMA: channel(s) 5 6 7 
	16-bit, not a bus master, , count by word, Compatibility mode
    I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
	[16-bit addr]
    I/O Range 0x300 .. 0x330, alignment 0x10, len 0x2
	[16-bit addr]
    I/O Range 0x388 .. 0x394, alignment 0x4, len 0x4
	[16-bit addr]
TAG End DF

Logical Device ID: CTL7002 0x02708c0e #1
Compatible Device ID: PNPb02f (2fb0d041)
Device Description: Game
TAG Start DF
Good Configuration
    I/O Range 0x200 .. 0x200, alignment 0x1, len 0x8
	[16-bit addr]
TAG Start DF
Acceptable Configuration
    I/O Range 0x200 .. 0x208, alignment 0x8, len 0x8
	[16-bit addr]
TAG End DF

Logical Device ID: CTL0023 0x23008c0e #2
Device Description: WaveTable
TAG Start DF
Good Configuration
    I/O Range 0x620 .. 0x620, alignment 0x1, len 0x4
	[16-bit addr]
TAG Start DF
Acceptable Configuration
    I/O Range 0x620 .. 0x680, alignment 0x20, len 0x4
	[16-bit addr]
TAG End DF
End Tag

Successfully got 67 resources, 3 logical fdevs
-- card select # 0x0001

CSN CTL009e (0x9e008c0e), Serial Number 0x09fbdbd9

Logical device #0
IO:  0x0220 0x0330 0x0388 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 5 0
DMA 1 5
IO range check 0x00 activate 0x01

Logical device #1
IO:  0x0200 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x01

Logical device #2
IO:  0x0620 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x01

-- 
___________________________________________________________________________
Danny Dulai                                           Feet. Pumice. Lotion.
http://www.ishiboo.com/~nirva/                            nirva@ishiboo.com

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-multimedia" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19980519232608.51200>