Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 21 Jun 2007 08:25:35 +0300
From:      "V.Chukharev" <chukharev@mail.ru>
To:        "Sateesh Mandava" <Sateesh.Mandava@infotechfl.com>
Cc:        freebsd-current@freebsd.org
Subject:   Re: AGPGART not found ... ( on Q965)
Message-ID:  <op.tt9aooch0g54sc@localhost>

next in thread | raw e-mail | index | archive | help
Hi,

I had similar problem. I deleted 'device agp' from the kernel config,
commented out 'acpi_video_load=3D"YES"' from /boot/loader.conf, and
added 'agp_load=3D"YES"' to it. After reboot with the new kernel
/dev/agpgart was found.
I did not try to find minimal change needed on my 6-STABLE.

Try if this helps to your CURRENT too.
-- =

V. Chukharev

You wrote:
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
Hi,

I am trying to get the i810/intel drivers work with xorg 7.2. X server i=
s
failing with /dev/agpgart missing error.

Can somebody help me on how to fix this error? Below are more details ab=
out
the problem.

$uname -r
7.0-CURRENT-200703

$lspci -lv
....
vgapci0@pci0:2:0:       class=3D0x030000 card=3D0x5058107b chip=3D0x2992=
8086
rev=3D0x02 hdr=3D0x00
     vendor     =3D 'Intel Corporation'
     device     =3D 'Q963/Q965 Integrated Graphics Controller'
     class      =3D display
     subclass   =3D VGA
vgapci1@pci0:2:1:       class=3D0x038000 card=3D0x5058107b chip=3D0x2993=
8086
rev=3D0x02 hdr=3D0x00
     vendor     =3D 'Intel Corporation'
     device     =3D 'Q963/Q965 Integrated Graphics Controller'
     class      =3D display
....

$more /etc/X11/xorg.conf
...
Section "Device"
  Identifier  "Card0"
  Driver      "i810"
  VendorName  "Intel Corporation"
  BoardName   "Unknown Board"
  BusID       "PCI:0:2:0"
  VideoRam    262144
EndSection
...

$ more /var/log/Xorg.0.log
....
(EE) GARTInit: Unable to open /dev/agpgart (No such file or directory)
(WW) intel(0): /dev/agpgart is either not available, or no memory is
available
for allocation.  Using pre-allocated memory only.
(**) intel(0): VideoRam: 7676 KB
....
(EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too =
low?
...


Thanks,
Sateesh.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?op.tt9aooch0g54sc>