Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 23 Oct 2014 03:13:15 +0000 (UTC)
From:      Ian Lepore <ian@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org
Subject:   svn commit: r273514 - head/sys/arm/freescale/imx
Message-ID:  <201410230313.s9N3DF4B051389@svn.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: ian
Date: Thu Oct 23 03:13:14 2014
New Revision: 273514
URL: https://svnweb.freebsd.org/changeset/base/273514

Log:
  Unconditionally enable the clocks for all imx6 devices that we have drivers
  for, or that are required to run the chip (such as busses).  Turn off all
  the devices we don't yet have drivers for.
  
  Some day we will have a fully functional imx6 clock driver so that we can
  manage clocks based on fdt data.  This will have to do until then.

Modified:
  head/sys/arm/freescale/imx/imx6_ccm.c

Modified: head/sys/arm/freescale/imx/imx6_ccm.c
==============================================================================
--- head/sys/arm/freescale/imx/imx6_ccm.c	Thu Oct 23 02:53:57 2014	(r273513)
+++ head/sys/arm/freescale/imx/imx6_ccm.c	Thu Oct 23 03:13:14 2014	(r273514)
@@ -76,6 +76,28 @@ WR4(struct ccm_softc *sc, bus_size_t off
 	bus_write_4(sc->mem_res, off, val);
 }
 
+/*
+ * Until we have a fully functional ccm driver which implements the fdt_clock
+ * interface, use the age-old workaround of unconditionally enabling the clocks
+ * for devices we might need to use.  The SoC defaults to most clocks enabled,
+ * but the rom boot code and u-boot disable a few of them.  We turn on only
+ * what's needed to run the chip plus devices we have drivers for, and turn off
+ * devices we don't yet have drivers for.  (Note that USB is not turned on here
+ * because that is one we do when the driver asks for it.)
+ */
+static void
+ccm_init_gates(struct ccm_softc *sc)
+{
+                                        /* Turns on... */
+	WR4(sc, CCM_CCGR0, 0x0000003f); /* ahpbdma, aipstz 1 & 2 busses */
+	WR4(sc, CCM_CCGR1, 0x00300c00); /* gpt, enet */
+	WR4(sc, CCM_CCGR2, 0x0fffffc0); /* ipmux & ipsync (bridges), iomux, i2c */
+	WR4(sc, CCM_CCGR3, 0x3ff00000); /* DDR memory controller */
+	WR4(sc, CCM_CCGR4, 0x0000f300); /* pl301 bus crossbar */
+	WR4(sc, CCM_CCGR5, 0x0f000000); /* uarts */
+	WR4(sc, CCM_CCGR6, 0x000000cc); /* usdhc 1 & 3 */
+}
+
 static int
 ccm_detach(device_t dev)
 {
@@ -130,6 +152,8 @@ ccm_attach(device_t dev)
 	reg = (reg & ~CCM_CLPCR_LPM_MASK) | CCM_CLPCR_LPM_RUN;
 	WR4(sc, CCM_CLPCR, reg);
 
+	ccm_init_gates(sc);
+
 	err = 0;
 
 out:



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201410230313.s9N3DF4B051389>