Date: Thu, 22 Mar 2001 21:56:16 +0100 From: Jesper Skriver <jesper@skriver.dk> To: Juriy Goloveshkin <juriy@avias.com> Cc: cvs-all@FreeBSD.ORG, sos@freebsd.dk Subject: Re: ad vs wd Message-ID: <20010322215616.A95073@skriver.dk> In-Reply-To: <20010322234317.A67583@avias.com>; from juriy@avias.com on Thu, Mar 22, 2001 at 11:43:17PM %2B0300 References: <bulk.5720.20010322095828@hub.freebsd.org> <20010322234317.A67583@avias.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Mar 22, 2001 at 11:43:17PM +0300, Juriy Goloveshkin wrote: > On Thu, Mar 22, 2001 at 09:58:28AM -0800, cvs-all-digest wrote: > > > > ad0: WRITE command timeout tag=0 serv=0 - resetting > > > ata0: resetting devices .. done > > > ad0: timeout waiting for DRQ - resetting > > > ata0: resetting devices .. done > > > ad0: timeout waiting for DRQ - resetting > > > ata0: resetting devices .. done > > > ad0: timeout waiting for DRQ - resetting > > > ata0: resetting devices .. done > > > > > > messages (very infrequently -- once every few days). My atamodes are: > > > > > > hw.atamodes: pio,dma,dma,pio, > > > > What type of drive is that ? > > I have this on 2-P2x400 tyan's motherboard and FreeBSD 4-stable... > and... FreeBSD-4 didn't work with 'ad' drivers more than 4-6 hours. > sorry, but I cannot do experiments on production box to find out the problem. > > this drives work fine only with _OLD_ wd drived. ;( > please, don't remove wd driver. maybe it's old, but it works on my box fine! > the disks are: > > ide_pci0: <Intel PIIX4 Bus-master IDE controller> port 0xffa0-0xffaf at device 7.1 on pci0 > ide_pci0: driver is using old-style compatability shims > wdc0 at port 0x1f0-0x1f7 irq 14 flags 0xa0ffa0ff on isa0 > wdc0: unit 0 (wd0): <IBM-DTLA-307030>, DMA, 32-bit, multi-block-16 > wd0: 29314MB (60036480 sectors), 59560 cyls, 16 heads, 63 S/T, 512 B/S > wdc0: unit 1 (wd1): <IBM-DTLA-307030>, DMA, 32-bit, multi-block-16 > wd1: 29314MB (60036480 sectors), 59560 cyls, 16 heads, 63 S/T, 512 B/S > wdc0: driver is using old-style compatability shims The wd driver doesn't have support for the higher speeds, as the ata driver does, so it looks like bad cables to me, be sure you use proper cables. /Jesper -- Jesper Skriver, jesper(at)skriver(dot)dk - CCIE #5456 Work: Network manager @ AS3292 (Tele Danmark DataNetworks) Private: FreeBSD committer @ AS2109 (A much smaller network ;-) One Unix to rule them all, One Resolver to find them, One IP to bring them all and in the zone to bind them. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe cvs-all" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010322215616.A95073>