Date: Sun, 4 Nov 2007 18:04:29 +1100 (EST) From: Ian Smith <smithi@nimnet.asn.au> To: Henrik Brix Andersen <brix@freebsd.org> Cc: freebsd-stable@freebsd.org, sos@freebsd.org Subject: Re: 7 on Soekris net4801? Message-ID: <Pine.BSF.3.96.1071104143110.4759A-100000@gaia.nimnet.asn.au> In-Reply-To: <20071103161306.GA56113@tirith.brixandersen.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 3 Nov 2007, Henrik Brix Andersen wrote: > On Sun, Nov 04, 2007 at 02:59:36AM +1100, Ian Smith wrote: > > any particular/new issues with RELENG_7 on the Soekris net4801? > > > > Thought I should check before upgrading my T23 as a build platform .. > > I haven't done this before, and will be relying on the howtos for 6.X > > I recently upgraded two of my net4801s to RELENG_7 - the only problem > I have seen so far, is that savecore(8) attempts to do non-aligned DMA > transfers and fails. I haven't had time to dig further into this issue > yet, though. Thanks, Brix. I'm wondering if that's still (again?) to do with item 3 at http://www.soekris.com/Issue0003.htm ? I've no idea whether a similar 'quick-fix' to that given for FreeBSD 4.X to /sys/dev/ata/ata-dma.c would work with the 5.5-S and 6.1-R code I have here, noting that the alignment is now specified in bytes rather than the earlier bytes-1, so '4' is presumably the value needed for dword alignment. Hmm, ok, trying to dig a little deeper .. rev 1.118 notes say: Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. but I couldn't find anywhere in 1.118 or in later versions up to 1.147 (RELENG_7, HEAD) that does anything other than 'ch->dma->alignment = 2;' (Not that me not finding it means much :) I also noticed at 1.137.2.2: Add support for using DMA on dump, greatly speeds up the dump process. Copying Soren in case he may have a bead on this, but it hardly seems any impediment to preparation or building for it when the box arrives. Cheers, Ian
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.1071104143110.4759A-100000>