Date: Fri, 21 Jun 2002 15:03:17 -0400
From: "Mike Jakubik" <mikej@trigger.net>
To: "Kenneth Mays" <kmays2000@hotmail.com>, <freebsd-stable@FreeBSD.ORG>
Subject: RE: ATA/ATAPI driver(s) for 4.6-R {Stable}
Message-ID: <HPEHJFKBNEHFPAOFMEDDEEEADLAA.mikej@trigger.net>
In-Reply-To: <LAW2-F1314mF1IT18ol0000534f@hotmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
The following Maxtor drives seem to be working OK so far since my update to
4.6:
ad0: 76345MB <MAXTOR 6L080L4> [155114/16/63] at ata0-master UDMA66
ad2: 156334MB <Maxtor 4G160J8> [317632/16/63] at ata1-master UDMA66
ad4: 78167MB <Maxtor 98196H8> [158816/16/63] at ata2-master UDMA100
ad6: 78167MB <Maxtor 98196H8> [158816/16/63] at ata3-master UDMA100
System info:
FreeBSD 4.6-RELEASE #0: Fri Jun 7 23:16:54 EDT 2002
root@wettoast.net:/usr/obj/usr/src/sys/DP
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1210789398 Hz
CPU: AMD Athlon(tm) Processor (1210.79-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 536788992 (524208K bytes)
avail memory = 519626752 (507448K bytes)
atapci0: <VIA 82C686 ATA66 controller> port 0xd800-0xd80f at device 4.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
atapci1: <Promise ATA100 controller> port
0x8000-0x803f,0x8400-0x8403,0x8800-0x8807,0x9000-0x9003,0x9400-0x9407 mem
0xe0000000-0xe001ffff irq 10 at device 17.0 on pci0
ata2: at 0x9400 on atapci1
ata3: at 0x8800 on atapci1
> -----Original Message-----
> From: owner-freebsd-stable@FreeBSD.ORG
> [mailto:owner-freebsd-stable@FreeBSD.ORG]On Behalf Of Kenneth Mays
> Sent: Friday, June 21, 2002 2:07 PM
> To: freebsd-stable@FreeBSD.ORG
> Subject: Re: ATA/ATAPI driver(s) for 4.6-R {Stable}
>
>
> Oliver,
>
> Is it safe to say the Maxtor DiamondMax 540X ATA/133 4G160J8 (160GB) and
> 4G120J6 (120GB) hard drives work fine under FreeBSD 4.6-stable??
> The PCI host bus adapter I was looking into is the Maxtor
> K01PCAT133. It can
> hold up to four drives so I spec'd it at (160GBx4(-overhead)) per
> adapter.
> Just was casting out if there was other people with their own proven RAID
> solutions that has worked reliably for them (speedwise as well, minus the
> data corruption).
>
> Ken
> P.S. Too bad many articles (like Moeshe Bar) are not updated to reflect
> Linux 2.2.21/2.4.18, Solaris 9, and FreeBSD 4.6. So many changes
> have gone
> on during most of these articles. Hope to see more accurate and updated
> articles by people who know what they are doing. ;o>
>
>
>
>
>
> _________________________________________________________________
> MSN Photos is the easiest way to share and print your photos:
> http://photos.msn.com/support/worldwide.aspx
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-stable" in the body of the message
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?HPEHJFKBNEHFPAOFMEDDEEEADLAA.mikej>