Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 20 Oct 2015 01:54:25 +0000 (UTC)
From:      "Conrad E. Meyer" <cem@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org
Subject:   svn commit: r289614 - head/sys/dev/ntb/ntb_hw
Message-ID:  <201510200154.t9K1sPH2031002@repo.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: cem
Date: Tue Oct 20 01:54:25 2015
New Revision: 289614
URL: https://svnweb.freebsd.org/changeset/base/289614

Log:
  NTB: MFV 42fefc86: Add parameters for Intel SNB B2B addresses
  
  Add module parameters for the addresses to be used in B2B topology.
  
  Authored by:	Allen Hubbe
  Obtained from:	Linux (Dual BSD/GPL driver)
  Sponsored by:	EMC / Isilon Storage Division

Modified:
  head/sys/dev/ntb/ntb_hw/ntb_hw.c

Modified: head/sys/dev/ntb/ntb_hw/ntb_hw.c
==============================================================================
--- head/sys/dev/ntb/ntb_hw/ntb_hw.c	Tue Oct 20 01:54:16 2015	(r289613)
+++ head/sys/dev/ntb/ntb_hw/ntb_hw.c	Tue Oct 20 01:54:25 2015	(r289614)
@@ -397,7 +397,7 @@ static const struct ntb_xlat_reg xeon_se
 	.bar5_xlat = XEON_SBAR5XLAT_OFFSET,
 };
 
-static const struct ntb_b2b_addr xeon_b2b_usd_addr = {
+static struct ntb_b2b_addr xeon_b2b_usd_addr = {
 	.bar0_addr = XEON_B2B_BAR0_USD_ADDR,
 	.bar2_addr64 = XEON_B2B_BAR2_USD_ADDR64,
 	.bar4_addr64 = XEON_B2B_BAR4_USD_ADDR64,
@@ -405,7 +405,7 @@ static const struct ntb_b2b_addr xeon_b2
 	.bar5_addr32 = XEON_B2B_BAR5_USD_ADDR32,
 };
 
-static const struct ntb_b2b_addr xeon_b2b_dsd_addr = {
+static struct ntb_b2b_addr xeon_b2b_dsd_addr = {
 	.bar0_addr = XEON_B2B_BAR0_DSD_ADDR,
 	.bar2_addr64 = XEON_B2B_BAR2_DSD_ADDR64,
 	.bar4_addr64 = XEON_B2B_BAR4_DSD_ADDR64,
@@ -413,6 +413,37 @@ static const struct ntb_b2b_addr xeon_b2
 	.bar5_addr32 = XEON_B2B_BAR5_DSD_ADDR32,
 };
 
+SYSCTL_NODE(_hw_ntb, OID_AUTO, xeon_b2b, CTLFLAG_RW, 0,
+    "B2B MW segment overrides -- MUST be the same on both sides");
+
+SYSCTL_UQUAD(_hw_ntb_xeon_b2b, OID_AUTO, usd_bar2_addr64, CTLFLAG_RDTUN,
+    &xeon_b2b_usd_addr.bar2_addr64, 0, "If using B2B topology on Xeon "
+    "hardware, use this 64-bit address on the bus between the NTB devices for "
+    "the window at BAR2, on the upstream side of the link.  MUST be the same "
+    "address on both sides.");
+SYSCTL_UQUAD(_hw_ntb_xeon_b2b, OID_AUTO, usd_bar4_addr64, CTLFLAG_RDTUN,
+    &xeon_b2b_usd_addr.bar4_addr64, 0, "See usd_bar2_addr64, but BAR4.");
+SYSCTL_UQUAD(_hw_ntb_xeon_b2b, OID_AUTO, usd_bar4_addr32, CTLFLAG_RDTUN,
+    &xeon_b2b_usd_addr.bar4_addr32, 0, "See usd_bar2_addr64, but BAR4 "
+    "(split-BAR mode).");
+SYSCTL_UQUAD(_hw_ntb_xeon_b2b, OID_AUTO, usd_bar5_addr32, CTLFLAG_RDTUN,
+    &xeon_b2b_usd_addr.bar4_addr32, 0, "See usd_bar2_addr64, but BAR5 "
+    "(split-BAR mode).");
+
+SYSCTL_UQUAD(_hw_ntb_xeon_b2b, OID_AUTO, dsd_bar2_addr64, CTLFLAG_RDTUN,
+    &xeon_b2b_dsd_addr.bar2_addr64, 0, "If using B2B topology on Xeon "
+    "hardware, use this 64-bit address on the bus between the NTB devices for "
+    "the window at BAR2, on the downstream side of the link.  MUST be the same"
+    " address on both sides.");
+SYSCTL_UQUAD(_hw_ntb_xeon_b2b, OID_AUTO, dsd_bar4_addr64, CTLFLAG_RDTUN,
+    &xeon_b2b_dsd_addr.bar4_addr64, 0, "See dsd_bar2_addr64, but BAR4.");
+SYSCTL_UQUAD(_hw_ntb_xeon_b2b, OID_AUTO, dsd_bar4_addr32, CTLFLAG_RDTUN,
+    &xeon_b2b_dsd_addr.bar4_addr32, 0, "See dsd_bar2_addr64, but BAR4 "
+    "(split-BAR mode).");
+SYSCTL_UQUAD(_hw_ntb_xeon_b2b, OID_AUTO, dsd_bar5_addr32, CTLFLAG_RDTUN,
+    &xeon_b2b_dsd_addr.bar4_addr32, 0, "See dsd_bar2_addr64, but BAR5 "
+    "(split-BAR mode).");
+
 /*
  * OS <-> Driver interface structures
  */



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201510200154.t9K1sPH2031002>