Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 20 Feb 2003 09:30:07 +0100
From:      Maikel Verheijen <maikel@myst.dohd.org>
To:        current@freebsd.org
Subject:   Wavelan problems
Message-ID:  <20030220083007.GA23886@myst.dohd.org>

next in thread | raw e-mail | index | archive | help
Since I deleted the original email of Michael Bretterklieber, I can't
actually reply anymore :(

This is what I would have replied:

I can say nothing more than "me too", with a Lucent pC24E-H-ET, a generic
lucent silver card.

Dmesg info:
wi0: <WaveLAN/IEEE> at port 0x100-0x13f irq 11 function 0 config 1 on
pccard0
wi0: 802.11 address: 00:02:2d:0c:e1:24
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmware: Station (7.28.1)
wi0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps

And exact the same wicontrol output. 

I would like to add that, on enabeling the card (ifconfig wi0 up), my
machine practically freezes, and when I pull the card out, I got my machine
back most of the time...

Dmesg info after doing "ifconfig wi0 up":

wi0: timeout in wi_cmd 0x0002; event status 0x0080
wi0: timeout in wi_cmd 0x0000; event status 0x0080
wi0: wi_cmd: busy bit won't clear.
wi0: wi_cmd: busy bit won't clear.
wi0: wi_cmd: busy bit won't clear.
wi0: wi_cmd: busy bit won't clear.
wi0: init failed
wi0: timeout in wi_seek to fc00/0
wi0: timeout in wi_seek to fc81/0
wi0: timeout in wi_seek to fc0c/0
wi0: timeout in wi_seek to fc02/0
wi0: timeout in wi_seek to fc03/0
wi0: timeout in wi_seek to fc04/0
wi0: timeout in wi_seek to fc01/0
wi0: timeout in wi_seek to fc09/0
wi0: timeout in wi_seek to fc07/0
wi0: timeout in wi_seek to fc83/0
wi0: timeout in wi_seek to fc06/0
wi0: timeout in wi_seek to fc25/0
wi0: timeout in wi_seek to fc84/0
wi0: timeout in wi_seek to fc0e/0
wi0: timeout in wi_seek to fc85/0
wi0: timeout in wi_seek to fc20/0
wi0: timeout in wi_seek to fc80/0
wi0: wi_cmd: busy bit won't clear.
wi0: failed to allocate 2372 bytes on NIC
wi0: tx buffer allocation failed (error 12)
wi0: interface not running
wi0: wi_cmd: busy bit won't clear.
wi0: detached

(got this after unplugging the wi-card, to un-freeze the card.

Kind regards,


Maikel Verheijen



Kind regards,
   Maikel Verheijen

USER, n.:
        The word computer professionals use when they mean "idiot."
                -- Dave Barry, "Claw Your Way to the Top"

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030220083007.GA23886>