Date: Mon, 4 Aug 2003 20:27:57 -0500 From: "Chris Collins" <collins@collins-ca.com> To: Marcel Moolenaar <marcel@xcllnt.net>, Chris Collins <collins@collins-ca.com> Cc: freebsd-mobile@freebsd.org Subject: Re: Vaio 505GL PC-CARD (pccardd) problmes Message-ID: <20030805011859.M5601@collins-ca.com> In-Reply-To: <20030805011245.GA1107@dhcp01.pn.xcllnt.net> References: <200308020422.26187.metrol@metrol.net> <20030804161943.GA3447@spc.org> <20030804173814.M34375@collins-ca.com> <20030804.160229.63204982.imp@bsdimp.com> <20030804233809.M83408@collins-ca.com> <20030805011245.GA1107@dhcp01.pn.xcllnt.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello hw.pci.allow_unsupported_io_range=1 did the trick...thanks for your help.. My linksys WPC11 card works now... However the WPC54G does not... I get the following error message when I put teh 54G in.. Do you have anymore ticks up your sleve that might help me out... :) I might be wrong but I don't think there is any support yet for the Linksys 54G card. Aug 4 21:25:37 vaio kernel: start (88000000) < sc->membase (e0200000) Aug 4 21:25:37 vaio kernel: end (ffffffff) > sc->memlimit (e02fffff) Aug 4 21:25:37 vaio kernel: start (88000000) < sc->membase (e0200000) Aug 4 21:25:37 vaio kernel: end (ffffffff) > sc->memlimit (e02fffff) Aug 4 21:25:37 vaio kernel: cardbus0: <network> at device 0.0 (no driver attached) Aug 4 21:25:37 vaio kernel: cbb0: CardBus card activation failed Aug 4 21:25:37 vaio dhclient: DHCPREQUEST on fxp0 to 192.168.0.1 port 67 Aug 4 21:25:37 vaio dhclient: DHCPACK from 192.168.0.1 Aug 4 21:25:37 vaio dhclient: New Network Number: 192.168.0.0 Aug 4 21:25:37 vaio dhclient: New Broadcast Address: 192.168.0.255 Aug 4 21:25:37 vaio dhclient: bound to 192.168.0.153 -- renewal in 282 seconds. On Mon, 4 Aug 2003 18:12:45 -0700, Marcel Moolenaar wrote > On Mon, Aug 04, 2003 at 07:16:47PM -0500, Chris Collins wrote: > > I am running 5.1-current and I think that i read somwhere NEWCARD is default. > > I am not sure how else to tell or show to switch. > > > > I have two a linksys WPC11 Wireless Card & and Linksys WPC54G card that I am > > trying to get working. > > > > Below is my pccard.conf and dmesg.boot > > Do you have the following in /boot/loader.conf? > hw.pci.allow_unsupported_io_range=1 > > You should get something like: > > : > FreeBSD 5.1-CURRENT #0: Fri Aug 1 22:29:03 PDT 2003 > marcel@dhcp01.pn.xcllnt.net:/usr/obj/usr/src/sys/VAIO > : > CPU: Mobile Intel(R) Pentium(R) III CPU - M 1200MHz (1193.11-MHz > 686-class CPU) : acpi0: <SONY C1 > on motherboard : cbb0: > <RF5C475 PCI-CardBus Bridge> irq 9 at device 5.0 on pci2 start > (88000000) < sc->membase (e0200000) end (ffffffff) > sc->memlimit > (e02fffff) cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard > bus> on cbb0 : start (88000000) < sc->membase (e0200000) end > (ffffffff) > sc->memlimit (e02fffff) start (88000000) < sc->membase > (e0200000) end (ffffffff) > sc->memlimit (e02fffff) wi0: <Lucent > Technologies WaveLAN/IEEE> at port 0x100-0x13f irq 9 function 0 > config 1 on pccard0 : wi0: bad alloc 2ba != ff, cur 0 nxt 0 : > > PS: Don't send pccard.conf. We all have it ourselves. Just send us > the additions, removals or modifications only. > > -- > Marcel Moolenaar USPA: A-39004 marcel@xcllnt.net
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030805011859.M5601>