Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 13 Apr 2004 20:17:57 +0200
From:      Bohdan Horst <nexus@irc.pl>
To:        "M. Warner Losh" <imp@bsdimp.com>
Cc:        freebsd-mobile@freebsd.org
Subject:   Re: [patch] Xircom REM56G-100
Message-ID:  <20040413181757.GA13763@essus.net>
In-Reply-To: <20040413.085352.104258455.imp@bsdimp.com>
References:  <20040412.094255.116837223.imp@bsdimp.com> <20040412155753.382FE5D08@ptavv.es.net> <20040412164611.GA37010@essus.net> <20040413.085352.104258455.imp@bsdimp.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Apr 13, 2004 at 08:53:52AM -0600, M. Warner Losh wrote:
> In message: <20040412164611.GA37010@essus.net>
>             Bohdan Horst <nexus@irc.pl> writes:
> : Odd.. on my RBEM56G-100 works only modem .. (and i need eth) :)
> : Apr  3 19:19:18 aristo kernel: cardbus1: <network, ethernet> at device 0.0 (no driver attached)
> 
> no dc in the kernel?
> 

ehh my fault :( i suppose that xe driver was for all Xircom cards ..

now:
dc0: <Xircom X3201 10/100BaseTX> port 0x1000-0x107f mem 0x20000000-0x200007ff,0x20000800-0x20000fff
irq 9 at device 0.0 on cardbus1
dc0: Ethernet address: 00:10:a4:c4:a5:b4
miibus0: <MII bus> on dc0
tdkphy0: <TDK 78Q2120 media interface> on miibus0
tdkphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sio4: <Xircom Cardbus modem> port 0x1080-0x1087 mem 0x20000000-0x200007ff,0x20000800-0x20000fff irq 9 at device 0.1 on cardbus1
sio4: type 16550A
sio4: unable to activate interrupt in fast mode - using normal mode

thanx :)

-- 
 /  irl: Bohdan 'Nexus' Horst  |  irc: Nexus  \
{----------------------v-------^---------------}
 \ http://irc.pl/nexus | mailto: nexus&irc.pl /



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040413181757.GA13763>