Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 13 Apr 2005 09:28:11 -0400
From:      <bob@a1poweruser.com>
To:        "Alexandre Vasconcelos" <alex.vasconcelos@gmail.com>, <freebsd-questions@freebsd.org>
Subject:   RE: Using PPPoE
Message-ID:  <MIEPLLIBMLEEABPDBIEGKEBLHEAA.bob@a1poweruser.com>
In-Reply-To: <26551fb5050413060419fadcf4@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
This is described in detail in the FreeBSD Install book at

http://freebsd.easyasthat.co.uk/



-----Original Message-----
From: owner-freebsd-questions@freebsd.org
[mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Alexandre
Vasconcelos
Sent: Wednesday, April 13, 2005 9:04 AM
To: freebsd-questions@freebsd.org
Subject: Using PPPoE

Hello All,

Sorry if this was discused here before but I couldn't find it on
archives..
I have an ADSL PPPoE connection with my Internet provider, my modem
is
an Alcatel
Speed Touch Pro, bridged mode. It works fine on windows (using a
built-in dialer) and linux (using rp-pppoe) - multi boot box. I've
followed the
handbook instructions
(http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/pppoe.htm
l)
to make it work on FreeBSD with PPPoE without success. My ppp.conf
is
just like section 21.5.2:

default:
 set log phase chat connect lcp ipcp tun command
 set ifaddr 10.0.0.140/32 0.0.0.0/0

brtelecom:
set device PPPoE:sis0
set authname myusername
set authkey mypassword
set dial
set login
add default HISADDR

When I run ppp -ddial brt modem lights start to blink, but ifconfig
shows interface tun0 without any IP address and /var/log/ppp.log
shows:

[root@alex ppp]# tail -f /var/log/ppp.log
Apr 12 01:13:01 alex ppp[9723]: tun0: IPCP: deflink: Oops, RCR in
Initial.
Apr 12 01:13:04 alex ppp[9723]: tun0: IPCP: deflink:
RecvConfigReq(112) state = Initial
Apr 12 01:13:04 alex ppp[9723]: tun0: IPCP:  IPADDR[6]
200.103.98.174
Apr 12 01:13:04 alex ppp[9723]: tun0: IPCP: deflink: Oops, RCR in
Initial.
Apr 12 01:13:07 alex ppp[9723]: tun0: IPCP: deflink:
RecvConfigReq(113) state = Initial
Apr 12 01:13:07 alex ppp[9723]: tun0: IPCP:  IPADDR[6]
200.103.98.174
Apr 12 01:13:07 alex ppp[9723]: tun0: IPCP: deflink: Oops, RCR in
Initial.
Apr 12 01:13:10 alex ppp[9723]: tun0: IPCP: deflink:
RecvConfigReq(114) state = Initial
Apr 12 01:13:10 alex ppp[9723]: tun0: IPCP:  IPADDR[6]
200.103.98.174
Apr 12 01:13:10 alex ppp[9723]: tun0: IPCP: deflink: Oops, RCR in
Initial.
Apr 12 01:13:13 alex ppp[9723]: tun0: IPCP: deflink:
RecvConfigReq(115) state = Initial
Apr 12 01:13:13 alex ppp[9723]: tun0: IPCP:  IPADDR[6]
200.103.98.174
Apr 12 01:13:13 alex ppp[9723]: tun0: IPCP: deflink: Oops, RCR in
Initial.
Apr 12 01:13:16 alex ppp[9723]: tun0: IPCP: deflink:
RecvConfigReq(116) state = Initial
Apr 12 01:13:16 alex ppp[9723]: tun0: IPCP:  IPADDR[6]
200.103.98.174
Apr 12 01:13:16 alex ppp[9723]: tun0: IPCP: deflink: Oops, RCR in
Initial.
Apr 12 01:13:19 alex ppp[9723]: tun0: IPCP: deflink:
RecvConfigReq(117) state = Initial
Apr 12 01:13:19 alex ppp[9723]: tun0: IPCP:  IPADDR[6]
200.103.98.174
Apr 12 01:13:19 alex ppp[9723]: tun0: IPCP: deflink: Oops, RCR in
Initial.
Apr 12 01:13:22 alex ppp[9723]: tun0: IPCP: deflink:
RecvConfigReq(118) state = Initial
Apr 12 01:13:22 alex ppp[9723]: tun0: IPCP:  IPADDR[6]
200.103.98.174
Apr 12 01:13:22 alex ppp[9723]: tun0: IPCP: deflink: Oops, RCR in
Initial

I don't have a default gateway.. and PPP can get the ISPs DNS! I
think
there's something really small that I'm missing..
Anyone could help me?
Thanks in advance.

Alexandre
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
"freebsd-questions-unsubscribe@freebsd.org"



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?MIEPLLIBMLEEABPDBIEGKEBLHEAA.bob>