Date: Fri, 21 Jan 2000 17:21:33 -0600 (CST) From: "Jeremy L. Stock" <jstock@visi.com> To: freebsd-current@FreeBSD.ORG Subject: Creative ViBRA16X Problem (fwd) Message-ID: <Pine.GSO.4.10.10001211714380.16841-100000@isis.visi.com>
next in thread | raw e-mail | index | archive | help
Thought I'd post this to -current also since it gives a little more detail (I hope). I can't believe I'm the only one experiencing this since it's still around when I do a fresh install from a snapshot. Not a huge deal for me since I can use Windows for audio, but I'd rather use FreeBSD again. I'm sure this will get addressed before 4.0R. I just wanted to make sure it's a known issue. -- Jeremy L. Stock <jstock@visi.com> ICQ 46329337 Fax # 612-629-6540 ---------- Forwarded message ---------- Date: Tue, 18 Jan 2000 22:14:44 -0600 (CST) From: Jeremy L. Stock <jstock@isis.visi.com> To: gandalf@vilnya.demon.co.uk Subject: Creative ViBRA16X Problem I posted this on -current almost a week ago and only received one response that didn't solve the problem. Audio hasn't played correctly for me since December 27th. Now when I try to play audio, it just stutters. I'm not sure when it broke since I went from -current as of the 27th to -current as of the 11th and now earlier today. The problem still remains even after a total reinstall. I just wanted to make sure you were aware of it and make sure you had a chance to correct it before 4.0R. Here's some info. Let me know if you need anything else. Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-CURRENT #0: Tue Jan 18 20:00:28 CST 2000 root@nic-31-c23-178.mn.mediaone.net:/usr/src/sys/compile/NIC Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 350796057 Hz CPU: AMD-K6(tm) 3D processor (350.80-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x58c Stepping = 12 Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX> AMD Features=0x80000800<SYSCALL,3DNow!> real memory = 134217728 (131072K bytes) avail memory = 127315968 (124332K bytes) Preloaded elf kernel "kernel" at 0xc02c2000. sbc0: <Creative ViBRA16X> at port 0x220-0x22f,0x300-0x301,0x388-0x38b irq 10 drq 0,1 on isa0 sbc0: setting card to irq 10, drq 0, 1 pcm0: <SB DSP 4.16 (ViBRA16X)> on sbc0 unknown0: <Game> at port 0x201 on isa0 And from boot -v (Let me know if I left an important section out) Trying Read_Port at 203 CTL0043: start dependant CTL0043: adding irq mask 0x20 CTL0043: adding dma mask 0x2 CTL0043: adding dma mask 0x8 CTL0043: adding io range 0x220-0x22f, size=0x10, align=0x1 CTL0043: adding io range 0x330-0x331, size=0x2, align=0x1 CTL0043: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0043: start dependant CTL0043: adding irq mask 0x6a0 CTL0043: adding dma mask 0xb CTL0043: adding dma mask 0xb CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0043: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0043: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0043: start dependant CTL0043: adding irq mask 0x6a0 CTL0043: adding dma mask 0xb CTL0043: adding dma mask 0xb CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0043: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0043: start dependant CTL0043: adding irq mask 0x6a0 CTL0043: adding dma mask 0xb CTL0043: adding dma mask 0xb CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0043: start dependant CTL0043: adding irq mask 0x6a0 CTL0043: adding dma mask 0xb CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0043: adding io range 0x300-0x331, size=0x2, align=0x10 CTL0043: adding io range 0x388-0x397, size=0x4, align=0x4 CTL0043: start dependant CTL0043: adding irq mask 0x6a0 CTL0043: adding dma mask 0xb CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0043: end dependant CTL7005: start dependant CTL7005: adding io range 0x201-0x201, size=0x1, align=0x1 CTL7005: start dependant CTL7005: adding io range 0x200-0x20f, size=0x1, align=0x1 CTL7005: end dependant isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices sbc0: <Creative ViBRA16X> at port 0x220-0x22f,0x300-0x301,0x388-0x38b irq 10 drq 0,1 on isa0 sbc0: setting card to irq 10, drq 0, 1 pcm0: <SB DSP 4.16 (ViBRA16X)> on sbc0 pcm: setmap 2d000, 2000; 0xc7814000 -> 2d000 pcm: setmap 2f000, 2000; 0xc7816000 -> 2f000 unknown0: <Game> at port 0x201 on isa0 pnpinfo output: Checking for Plug-n-Play devices... Card assigned CSN #1 Vendor ID CTL00f0 (0xf0008c0e), Serial Number 0xffffffff PnP Version 1.0, Vendor Version 16 Device Description: Creative ViBRA16X PnP Logical Device ID: CTL0043 0x43008c0e #0 Device Description: Audio TAG Start DF Good Configuration IRQ: 5 - only one type (true/edge) DMA: channel(s) 1 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x220, alignment 0x1, len 0x10 [16-bit addr] I/O Range 0x330 .. 0x330, alignment 0x1, len 0x2 [16-bit addr] I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 5 7 9 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 5 7 9 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 5 7 9 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 9 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x10, len 0x2 [16-bit addr] I/O Range 0x388 .. 0x394, alignment 0x4, len 0x4 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 9 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] TAG End DF Logical Device ID: CTL7005 0x05708c0e #1 Compatible Device ID: PNPb02f (2fb0d041) Device Description: Game TAG Start DF Good Configuration I/O Range 0x201 .. 0x201, alignment 0x1, len 0x1 [16-bit addr] TAG Start DF Acceptable Configuration I/O Range 0x200 .. 0x20f, alignment 0x1, len 0x1 [16-bit addr] TAG End DF End Tag Successfully got 48 resources, 2 logical fdevs -- card select # 0x0001 CSN CTL00f0 (0xf0008c0e), Serial Number 0xffffffff Logical device #0 IO: 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 IRQ 10 0 DMA 0 1 IO range check 0x00 activate 0x01 Logical device #1 IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 0 0 DMA 4 4 IO range check 0x00 activate 0x01 I hope this is helpful and I appreciate the work you've put into this. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.10.10001211714380.16841-100000>