Date: Sun, 14 Feb 1999 19:46:49 -0800 From: Chris Parry <laotzu@juniper.net> To: phoenix@calldei.com Cc: freebsd-stable@FreeBSD.ORG Subject: Re: Make world appears broken for REL_3 Message-ID: <19990214194649.L230@juniper.net> In-Reply-To: <19990214212730.D8679@holly.dyndns.org>; from Chris Costello on Sun, Feb 14, 1999 at 09:27:30PM -0600 References: <19990214191403.G230@juniper.net> <19990214212730.D8679@holly.dyndns.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Here's where it crashes after that: cc -O -pipe -DLIBC_RCS -DSYSLIBC_RCS -I/usr/src/lib/libc_r/../libc/include -DPTHREAD_KERNEL -D_THREAD_SAFE -DNOPOLL -I/usr/src/lib/libc_r/uthread -D__DBINTERFACE_PRIVATE -DPOSIX_MISTAKE -I/usr/src/lib/libc_r/../libc/locale -DBROKEN_DES -DYP -c /usr/src/lib/libc_r/uthread/uthread_kill.c -o uthread_kill.o cc -O -pipe -DLIBC_RCS -DSYSLIBC_RCS -I/usr/src/lib/libc_r/../libc/include -DPTHREAD_KERNEL -D_THREAD_SAFE -DNOPOLL -I/usr/src/lib/libc_r/uthread -D__DBINTERFACE_PRIVATE -DPOSIX_MISTAKE -I/usr/src/lib/libc_r/../libc/locale -DBROKEN_DES -DYP -c /usr/src/lib/libc_r/uthread/uthread_listen.c -o uthread_listen.o cc -O -pipe -DLIBC_RCS -DSYSLIBC_RCS -I/usr/src/lib/libc_r/../libc/include -DPTHREAD_KERNEL -D_THREAD_SAFE -DNOPOLL -I/usr/src/lib/libc_r/uthread -D__DBINTERFACE_PRIVATE -DPOSIX_MISTAKE -I/usr/src/lib/libc_r/../libc/locale -DBROKEN_DES -DYP -c /usr/src/lib/libc_r/uthread/uthread_mattr_init.c -o uthread_mattr_init.o cc -O -pipe -DLIBC_RCS -DSYSLIBC_RCS -I/usr/src/lib/libc_r/../libc/include -DPTHREAD_KERNEL -D_THREAD_SAFE -DNOPOLL -I/usr/src/lib/libc_r/uthread -D__DBINTERFACE_PRIVATE -DPOSIX_MISTAKE -I/usr/src/lib/libc_r/../libc/locale -DBROKEN_DES -DYP -c /usr/src/lib/libc_r/uthread/uthread_mattr_kind_np.c -o uthread_mattr_kind_np.o cc -O -pipe -DLIBC_RCS -DSYSLIBC_RCS -I/usr/src/lib/libc_r/../libc/include -DPTHREAD_KERNEL -D_THREAD_SAFE -DNOPOLL -I/usr/src/lib/libc_r/uthread -D__DBINTERFACE_PRIVATE -DPOSIX_MISTAKE -I/usr/src/lib/libc_r/../libc/locale -DBROKEN_DES -DYP -c /usr/src/lib/libc_r/uthread/uthread_multi_np.c -o uthread_multi_np.o cc -O -pipe -DLIBC_RCS -DSYSLIBC_RCS -I/usr/src/lib/libc_r/../libc/include -DPTHREAD_KERNEL -D_THREAD_SAFE -DNOPOLL -I/usr/src/lib/libc_r/uthread -D__DBINTERFACE_PRIVATE -DPOSIX_MISTAKE -I/usr/src/lib/libc_r/../libc/locale -DBROKEN_DES -DYP -c /usr/src/lib/libc_r/uthread/uthread_mutex.c -o uthread_mutex.o /usr/src/lib/libc_r/uthread/uthread_mutex.c: In function `pthread_mutex_init': /usr/src/lib/libc_r/uthread/uthread_mutex.c:56: `PTHREAD_MUTEX_DEFAULT' undeclared (first use this function) /usr/src/lib/libc_r/uthread/uthread_mutex.c:56: (Each undeclared identifier is reported only once /usr/src/lib/libc_r/uthread/uthread_mutex.c:56: for each function it appears in.) /usr/src/lib/libc_r/uthread/uthread_mutex.c:78: `PTHREAD_MUTEX_NORMAL' undeclared (first use this function) /usr/src/lib/libc_r/uthread/uthread_mutex.c:79: `PTHREAD_MUTEX_ERRORCHECK' undeclared (first use this function) /usr/src/lib/libc_r/uthread/uthread_mutex.c:84: `PTHREAD_MUTEX_RECURSIVE' undeclared (first use this function) /usr/src/lib/libc_r/uthread/uthread_mutex.c:90: warning: unreachable code at beginning of switch statement /usr/src/lib/libc_r/uthread/uthread_mutex.c: In function `pthread_mutex_trylock': /usr/src/lib/libc_r/uthread/uthread_mutex.c:179: `PTHREAD_MUTEX_NORMAL' undeclared (first use this function) /usr/src/lib/libc_r/uthread/uthread_mutex.c:180: `PTHREAD_MUTEX_DEFAULT' undeclared (first use this function) /usr/src/lib/libc_r/uthread/uthread_mutex.c:181: `PTHREAD_MUTEX_ERRORCHECK' undeclared (first use this function) /usr/src/lib/libc_r/uthread/uthread_mutex.c:193: `PTHREAD_MUTEX_RECURSIVE' undeclared (first use this function) /usr/src/lib/libc_r/uthread/uthread_mutex.c:214: warning: unreachable code at beginning of switch statement /usr/src/lib/libc_r/uthread/uthread_mutex.c: In function `pthread_mutex_lock': /usr/src/lib/libc_r/uthread/uthread_mutex.c:248: `PTHREAD_MUTEX_NORMAL' undeclared (first use this function) /usr/src/lib/libc_r/uthread/uthread_mutex.c:257: `PTHREAD_MUTEX_ERRORCHECK' undeclared (first use this function) /usr/src/lib/libc_r/uthread/uthread_mutex.c:264: `PTHREAD_MUTEX_DEFAULT' undeclared (first use this function) /usr/src/lib/libc_r/uthread/uthread_mutex.c:294: `PTHREAD_MUTEX_RECURSIVE' undeclared (first use this function) /usr/src/lib/libc_r/uthread/uthread_mutex.c:329: warning: unreachable code at beginning of switch statement /usr/src/lib/libc_r/uthread/uthread_mutex.c: In function `pthread_mutex_unlock': /usr/src/lib/libc_r/uthread/uthread_mutex.c:358: `PTHREAD_MUTEX_NORMAL' undeclared (first use this function) /usr/src/lib/libc_r/uthread/uthread_mutex.c:359: `PTHREAD_MUTEX_DEFAULT' undeclared (first use this function) /usr/src/lib/libc_r/uthread/uthread_mutex.c:360: `PTHREAD_MUTEX_ERRORCHECK' undeclared (first use this function) /usr/src/lib/libc_r/uthread/uthread_mutex.c:377: `PTHREAD_MUTEX_RECURSIVE' undeclared (first use this function) /usr/src/lib/libc_r/uthread/uthread_mutex.c:401: warning: unreachable code at beginning of switch statement *** Error code 1 Stop. *** Error code 1 Stop. *** Error code 1 Stop. *** Error code 1 Stop. *** Error code 1 Stop. # -chris On Sun, Feb 14, 1999 at 09:27:30PM -0600, Chris Costello wrote: > On Sun, Feb 14, 1999, Chris Parry put this into my mailbox: > > Hi, I just installed (again) 3.0 and am trying to build world so that I > > can cut my boot loader over to the new elf stuff, but I keep getting > > stopped in the same place (after a variety of attempts, I'm stuck). > > Here's where it dies, saying 'please run make again'. Any advice/help > > would be greatly appreciated. > > > > Here's the output where it fails: > > > > -o taint.So > > cc -fpic -DPIC -nostdinc -O -pipe > > -I/usr/obj/usr/src/gnu/usr.bin/perl/libperl > > -I/usr/src/gnu/usr.bin/perl/libperl/../../../../contrib/perl5 > > -I/usr/obj/usr/src/tmp/usr/include -c > > /usr/src/gnu/usr.bin/perl/libperl/../../../../contrib/perl5/deb.c -o > > deb.So > > cc -fpic -DPIC -nostdinc -O -pipe > > -I/usr/obj/usr/src/gnu/usr.bin/perl/libperl > > -I/usr/src/gnu/usr.bin/perl/libperl/../../../../contrib/perl5 > > -I/usr/obj/usr/src/tmp/usr/include -c > > /usr/src/gnu/usr.bin/perl/libperl/../../../../contrib/perl5/universal.c -o > > universal.So > > cc -fpic -DPIC -nostdinc -O -pipe > > -I/usr/obj/usr/src/gnu/usr.bin/perl/libperl > > -I/usr/src/gnu/usr.bin/perl/libperl/../../../../contrib/perl5 > > -I/usr/obj/usr/src/tmp/usr/include -c > > /usr/src/gnu/usr.bin/perl/libperl/../../../../contrib/perl5/globals.c -o > > globals.So > > cc -fpic -DPIC -nostdinc -O -pipe > > -I/usr/obj/usr/src/gnu/usr.bin/perl/libperl > > -I/usr/src/gnu/usr.bin/perl/libperl/../../../../contrib/perl5 > > -I/usr/obj/usr/src/tmp/usr/include -c > > /usr/src/gnu/usr.bin/perl/libperl/../../../../contrib/perl5/perlio.c -o > > perlio.So > > building shared library libperl.so.3 > > ===> gnu/usr.bin/perl/miniperl > > sh config_h.sh > > Extracting config.h (with variable substitutions) > > cc -nostdinc -O -pipe > > -I/usr/src/gnu/usr.bin/perl/miniperl/../../../../contrib/perl5 > > -I/usr/obj/usr/src/gnu/usr.bin/perl/miniperl > > -I/usr/obj/usr/src/tmp/usr/include -c > > /usr/src/gnu/usr.bin/perl/miniperl/../../../../contrib/perl5/miniperlmain.c > > cc -nostdinc -O -pipe > > -I/usr/src/gnu/usr.bin/perl/miniperl/../../../../contrib/perl5 > > -I/usr/obj/usr/src/gnu/usr.bin/perl/miniperl > > -I/usr/obj/usr/src/tmp/usr/include -static -o miniperl miniperlmain.o > > -lperl -lm -lcrypt > > ===> gnu/usr.bin/perl/perl > > find: build: No such file or directory > > find: build: No such file or directory > > sh config_h.sh > > Extracting config.h (with variable substitutions) > > sh writemain.sh > > Extracting writemain (with variable substitutions) > > sh writemain lib/auto/DynaLoader/DynaLoader.a > perlmain.c > > cc -nostdinc -O -pipe > > -I/usr/src/gnu/usr.bin/perl/perl/../../../../contrib/perl5 > > -I/usr/obj/usr/src/gnu/usr.bin/perl/perl > > -I/usr/obj/usr/src/tmp/usr/include -c perlmain.c > > miniperl /usr/src/gnu/usr.bin/perl/perl/../../../../contrib/perl5/configpm > > Config.pm Porting/Glossary myconfig config.sh > > cd lib ; ln -sf ../Config.pm > > miniperl -I/usr/obj/usr/src/gnu/usr.bin/perl/perl/lib -e 'use AutoSplit; > > autosplit_lib_modules(@ARGV)' lib/*.pm lib/*/*.pm > > AutoSplitting lib/Getopt/Long.pm (lib/auto/Getopt/Long) > > touch autosplit > > sh cflags.sh > > Extracting cflags (with variable substitutions) > > cd ext/DynaLoader; miniperl -I/usr/obj/usr/src/gnu/usr.bin/perl/perl/lib > > Makefile.PL LINKTYPE=static INSTALLDIRS=perl > > PERL_SRC=/usr/obj/usr/src/gnu/usr.bin/perl/perl LIBS="-lperl" > > INSTALLMAN3DIR=/usr/obj/usr/src/tmp/usr/share/perl/man3; make -B config > > PERL_SRC=/usr/obj/usr/src/gnu/usr.bin/perl/perl > > Writing Makefile for DynaLoader > > Warning: /usr/obj/usr/src/gnu/usr.bin/perl/perl/lib/Config.pm may be out > > of date with /usr/obj/usr/src/gnu/usr.bin/perl/perl/config.sh > > cd /usr/obj/usr/src/gnu/usr.bin/perl/perl && make lib/Config.pm > > `lib/Config.pm' is up to date. > > Warning: /usr/obj/usr/src/gnu/usr.bin/perl/perl/config.h out of date with > > /usr/obj/usr/src/gnu/usr.bin/perl/perl/config.sh > > *** Error code 1 (ignored) > > Makefile out-of-date with respect to Makefile.PL > > /usr/obj/usr/src/gnu/usr.bin/perl/perl/lib/Config.pm > > /usr/obj/usr/src/gnu/usr.bin/perl/perl/config.h > > Cleaning current config before rebuilding Makefile... > > make -f Makefile.old clean > /dev/null 2>&1 || /bin/sh -c true > > /usr/obj/usr/src/tmp/usr/bin/miniperl > > "-I/usr/obj/usr/src/gnu/usr.bin/perl/perl/lib" > > "-I/usr/obj/usr/src/gnu/usr.bin/perl/perl/lib" Makefile.PL > > "LINKTYPE=static" "INSTALLDIRS=perl" > > "PERL_SRC=/usr/obj/usr/src/gnu/usr.bin/perl/perl" "LIBS=-lperl" > > "INSTALLMAN3DIR=/usr/obj/usr/src/tmp/usr/share/perl/man3" > > Writing Makefile for DynaLoader > > ==> Your Makefile has been rebuilt. <== > > ==> Please rerun the make command. <== > > false > > false: not found > > *** Error code 1 > > > > Stop. > > *** Error code 1 > > > > Stop. > > *** Error code 1 > > > > Stop. > > *** Error code 1 > > > > Stop. > > *** Error code 1 > > > > Stop. > > *** Error code 1 > > > > Stop. > > *** Error code 1 > > > > Stop. > > *** Error code 1 > > > > Stop. > > *** Error code 1 > > > > Stop. > > > > Any ideas? > > rerun make. > > > > > ----- End forwarded message ----- > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-stable" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990214194649.L230>