Date: Wed, 2 Dec 1998 15:04:27 -0500 (EST) From: Chris Martino <chrismar@peanut.readington.com> To: freebsd-questions account <question@namodn.com> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Sound.....again! (yamaha OPL3) Message-ID: <Pine.BSF.3.96.981202150233.8240A-100000@peanut.readington.com> In-Reply-To: <Pine.BSF.3.96.981202113313.9427D-100000@namodn.com>
next in thread | previous in thread | raw e-mail | index | archive | help
So, does that mean that I have to add device pcm1 at isa? port ? tty irq 10 drq 1 flags 0x0 vector pcmintr to my kernel config file and re-compile? Also, I'm not sure of what to type in the kernel config to turn on that stuff you mentioned. Chris -- Chris Martino chrismar@readington.com On Wed, 2 Dec 1998, freebsd-questions account wrote: > > When you use plug n play cards with the pcm driver, the card uses the pcm1 > device, not pcm0 (i know, i know :) although it does not seem that your > card is assigned to pcm1.. > > Did you go into the kernel config (not visual!) and make sure the pnp > settings are the way you want them? (enabled, irq, port, etc) > > One thing you must do when the card is pcm1, rm the /dev/audio, dsp, dspW, > etc, and make new symlinks ln -s dsp1 dsp, audio1 audio, as opposed to the > dsp -> dsp0 like before... > > Do a cat /dev/sndstat and see if the card is successfully detected as > pcm1.. > > -rob > ( www.namodn.com ) > ( mailto : robert@namodn.com ) > > On Wed, 2 Dec 1998, Chris Martino wrote: > > > Over the last couple of days there has been a thread about the yamaha > > OPL-SA sound card. I've followed the thread closely as I have a Yamaha > > OPL3-SA3 sound board. > > > > Now, I followed the various hints to the T, and I'm still unable to get it > > to work. Here is the stuff that I have so far theat seems the most > > promising: > > > > In my kernel config: > > controller pnp0 > > device pcm0 at isa? port ? tty irq 10 drq 1 flags 0x0 vector pcmintr > > > > w/ that in there the dmesg shows: > > Probing for PnP devices: > > CSN 1 Vendor ID: YMH0800 [0x0008a865] Serial 0xffffffff > > Probing for devices on the ISA bus: > > sc0 at 0x60-0x6f irq 1 on motherboard > > sc0: VGA color <16 virtual consoles, flags=0x0> > > pcm0 not found at 0xffffffff > > > > Notice how it says it's not found...but I wonder why....what can I do do > > make it found? > > > > I'll send the pnpinfo to anyone who wants it. > > > > I'm running FreeBSD 2.2.6. > > > > Any suggestions are GREATLY appreaciated. > > > > TIA, > > Chris > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.981202150233.8240A-100000>