Date: Mon, 17 Jan 2011 12:00:52 +0100 From: =?ISO-8859-1?Q?Fernando_Apestegu=EDa?= <fernando.apesteguia@gmail.com> To: Chris Brennan <xaero@xaerolimit.net> Cc: Aryeh Friedman <aryeh.friedman@gmail.com>, Patrick Lamaiziere <patfbsd@davenulle.org>, freebsd-questions@freebsd.org Subject: Re: problems mounting android htc Message-ID: <AANLkTin556G5vw2Yd%2B89SQOB3UwdZ%2BPN2zzSBBoLgfLs@mail.gmail.com> In-Reply-To: <AANLkTinFLi=urEu2QPxE%2BSUxQ2X6y9rNv8Z2xdEu0JFc@mail.gmail.com> References: <AANLkTimT0S298-W1LxVBB8_ME8VPaHK-CyNiD1x=Hnkz@mail.gmail.com> <AANLkTik72Naapy1iAqVnrVH%2Bt4QK8SR_3_nO8eTfbanW@mail.gmail.com> <AANLkTik3NXfsvM9O3E7iuJVhCp7kOKqn06X0-mbm33_v@mail.gmail.com> <AANLkTimUN-MCvO4dwc88rR%2BM2zCkfU5YkGAOncZGXWer@mail.gmail.com> <AANLkTimWdfaT=T=e_JcjukmVpgTOtfwbFxgaj4=o_4-O@mail.gmail.com> <AANLkTik_TW7Gv-py=-A2zyxaLRzw6s15mcDP-=ECm6jZ@mail.gmail.com> <20110116022710.04a8b5f6@davenulle.org> <AANLkTinFLi=urEu2QPxE%2BSUxQ2X6y9rNv8Z2xdEu0JFc@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Jan 16, 2011 at 3:36 PM, Chris Brennan <xaero@xaerolimit.net> wrote= : > On Sat, Jan 15, 2011 at 8:27 PM, Patrick Lamaiziere > <patfbsd@davenulle.org>wrote: > >> Le Sat, 15 Jan 2011 18:57:33 -0500, >> Aryeh Friedman <aryeh.friedman@gmail.com> a =E9crit : >> >> > No idea how but when I plug the USB in it says "USB Debugging >> > Connected" >> >> On my HTC dream when I connect it to USB, there is a notification on the >> phone and I have (on the phone) to "unmount" the sd card. >> >> Then I can mount the sd card from FreeBSD with >> mount_msdosfs /dev/da0s1 /mnt >> >> dmesg: >> ugen2.2: <HTC> at usbus2 >> umass0: <HTC Android Phone, class 0/0, rev 1.02/1.00, addr 2> on usbus2 >> umass0: =A0SCSI over Bulk-Only; quirks =3D 0x0000 >> umass0:3:0:-1: Attached to scbus3 >> (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 >> (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error >> (probe0:umass-sim0:0:0:0): SCSI status: Check Condition >> (probe0:umass-sim0:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power >> on, reset, or bus device reset occurred) (probe0:umass-sim0:0:0:0): >> TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM >> status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI status: Check >> Condition (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 >> (Medium not present) da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 >> da0: <HTC Android Phone 0100> Removable Direct Access SCSI-2 device >> da0: 40.000MB/s transfers >> da0: Attempt to query device size failed: NOT READY, Medium not present >> GEOM: da0: partition 1 does not start on a track boundary. >> GEOM: da0: partition 1 does not end on a track boundary. >> > > I had a similar problem a weeks ago (posted to this list) with my LG Vort= ex. > It refused to mount (da0 would get assigned and then immediately removed)= . > If I left it plugged in for some undetermined time it worked. I would be > able to mount it normally on fbsd7.3/fbsd8.1/fbsd8.2/fbsd9.0 without issu= e. > I suspect it might be something in the Linux Kernel running on the phone = but > have not rooted it (and honestly don't intend to right now). I had the same problem: da4 created and immediately removed. I tried to lea= ve it plugged but nothing changed. I assume some event is eventually triggered in your case so somehow the device gets recognized. What does dmesg say? Thanks. > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.o= rg" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTin556G5vw2Yd%2B89SQOB3UwdZ%2BPN2zzSBBoLgfLs>