Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 19 Jun 1995 23:16:11 +1000
From:      Bruce Evans <bde@zeta.org.au>
To:        hlew@genome.Stanford.EDU, terry@cs.weber.edu
Cc:        bde@zeta.org.au, bugs@FreeBSD.org
Subject:   Re: 2.05R panics on boot
Message-ID:  <199506191316.XAA03425@godzilla.zeta.org.au>

next in thread | raw e-mail | index | archive | help
>Okay, if boot from DOS (and with no Ontrack DM installed)... here's the 
>output from pfdisk 0 (the 850MB Ontrack DM DOS Drive) and pfdisk 1 (540 
>MB FreeBSD drive)

># Partition table on device: 0
>geometry 1024 16 63 (cyls heads sectors)
>#  ID  First(cyl)  Last(cyl)  Name  # start, length (sectors)
>1  84      0       1652       unkno # 1, 1666223
># note:  last(1): phys=(628,15,63) logical=(1652,15,63)
># note: first(1): phys=(0,0,2) should be (0,1,1)
>2   0      0          0       empty # 0, 0
>3   0      0          0       empty # 0, 0
>4   0      0          0       empty # 0, 0

This is OK (except the `should be' note shouldn't be).

># Partition table on device: 1
>geometry 1022 16 63 (cyls heads sectors)
>#  ID  First(cyl)  Last(cyl)  Name  # start, length (sectors)
>1 165      0       1052       unkno # 63, 1061361
># note:  last(1): phys=(1023,15,63) logical=(1052,15,63)
>2   0      0          0       empty # 0, 0
>3   0      0          0       empty # 0, 0
>4   0      0          0       empty # 0, 0

OK, but several other things will have to be right to handle the partition
extending beyond cylinder 1024:

1) The BSD boot partition (normally wd1a) must not extend beyond cylinder
   1024.
2) bad144 must not be used.
3) The boot manager must not object to booting such partitions.  I think
   the OS/2 boot manager would object.

>---------
>Now if I boot from the hard drive with Ontrack DM's dynamic drive overlay 
>installed...

># Partition table on device: 0
>geometry 826 32 63 (cyls heads sectors)
>#  ID  First(cyl)  Last(cyl)  Name  # start, length (sectors)
>1   1      0        825       DOS12 # 63, 1665153
>2   0      0          0       empty # 0, 0
>3   0      0          0       empty # 0, 0
>4   0      0          0       empty # 0, 0

This is OK.

># Partition table on device: 1
>geometry 1022 16 63 (cyls heads sectors)
>#  ID  First(cyl)  Last(cyl)  Name  # start, length (sectors)
>1 165      0       1052       unkno # 63, 1061361
># note:  last(1): phys=(1023,15,63) logical=(1052,15,63)
>2   0      0          0       empty # 0, 0
>3   0      0          0       empty # 0, 0
>4   0      0          0       empty # 0, 0

OK.

>So it appears that nothing changes on the 540MB drive that doesn't use 
>Ontrack DM.  So any ideas?

The problem seems to have nothing to do with disk manager.  Maybe your
boot manager objects to partitions extending beyond cylinder 1024.

Bruce



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199506191316.XAA03425>