Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 23 Oct 2003 17:11:55 +0200 (CEST)
From:      Lukas Ertl <l.ertl@univie.ac.at>
To:        current@freebsd.org
Subject:   Re: em0: invalid EEPROM checksum
Message-ID:  <20031023171047.Q619@korben.in.tern>
In-Reply-To: <20031021155703.J98807@pcle2.cc.univie.ac.at>
References:  <20031021155703.J98807@pcle2.cc.univie.ac.at>

next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 21 Oct 2003, Lukas Ertl wrote:

> I just found that the em0 interface in one of my boxes stopped working
> after an upgrade from 5.1-RELEASE to 5.1-CURRENT, this is what the kernel
> spits out:
>
> $ dmesg | grep em0
> em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port
> 0xb000-0xb03f mem 0xe2000000-0xe201ffff irq 12 at device 5.0 on pci2
> em0: [MPSAFE]
> em0: The EEPROM Checksum Is Not Valid
> em0: Unable to initialize the hardware
> device_probe_and_attach: em0 attach returned 5

Oh, I forgot to add, this is what pciconf has to say about it:

none3@pci2:5:0: class=0x020000 card=0x002e8086 chip=0x100e8086 rev=0x02
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82544XT PRO/1000 MT Gigabit Ethernet Controller'
    class    = network
    subclass = ethernet

A solution would be highly appriciated.

regards,
le

-- 
Lukas Ertl                             eMail: l.ertl@univie.ac.at
UNIX Systemadministrator               Tel.:  (+43 1) 4277-14073
Vienna University Computer Center      Fax.:  (+43 1) 4277-9140
University of Vienna                   http://mailbox.univie.ac.at/~le/



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031023171047.Q619>