Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 7 Jun 2007 09:29:33 +0900
From:      Pyun YongHyeon <pyunyh@gmail.com>
To:        Arne H Juul <arnej@yahoo-inc.com>
Cc:        current@freebsd.org
Subject:   Re: panic in tulip_rx_intr after recent changes
Message-ID:  <20070607002933.GB23001@cdnetworks.co.kr>
In-Reply-To: <Pine.BSO.4.64.0706031537040.19155@murphy.trondheim.corp.yahoo.com>
References:  <Pine.BSO.4.64.0706031537040.19155@murphy.trondheim.corp.yahoo.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Jun 03, 2007 at 03:39:56PM +0200, Arne H Juul wrote:
 > (this mail didn't make it to the list from my private
 > address, so I'm resending it from work instead; my
 > apologies if it suddenly appears multiple times)
 > 
 > 
 > I'm getting a kernel panic during network startup with the
 > "de" driver.  Here's the messages from the crash dump:
 > 
 > <118>Mounting local file systems:
 > <118>.
 > <118>Setting hostname: bluebox.trondheim.corp.yahoo.com.
 > <118>net.inet6.ip6.auto_linklocal:
 > <118>1
 > <118> ->
 > <118>0
 > <118>
 > de0: unable to load rx map, error = 27
 > panic: tulip_rx_intr
 > cpuid = 0
 > KDB: enter: panic
 > Uptime: 13s
 > 
 > I think this must have been introduced during the last week
 > or so on -CURRENT; my old kernel works OK:
 > 
 > arnej@bluebox:~ $ uname -a
 > FreeBSD bluebox 7.0-CURRENT FreeBSD 7.0-CURRENT #13: Tue May 29 08:02:41 
 > CEST 2007 root@bluebox:/usr/obj/home/src.cur/sys/GENERIC amd64
 > 
 > as you can see this is on amd64 platform.
 > 
 > it crashes here (in if_de.c):
 > 
 > 3557                error = bus_dmamap_load_mbuf(ri->ri_data_tag,
 > *nextout->di_map, ms,
 > 3558                    tulip_dma_map_rxbuf, nextout->di_desc,
 > BUS_DMA_NOWAIT);
 > 3559                if (error) {
 > 3560                    device_printf(sc->tulip_dev,
 > 3561                        "unable to load rx map, error = %d\n",
 > error);
 > 3562                    panic("tulip_rx_intr");         /* XXX */
 > 3563                }
 > 
 > errno 27 is EFBIG, and indeed the mbuf is MCLBYTES:
 > 
 > (kgdb) print ms[0].M_dat.MH.MH_pkthdr.len
 > $22 = 2048
 > 
 > while the tag has a lower limit:
 > 
 > (kgdb) print ri->ri_data_tag[0].maxsegsz
 > $21 = 2032
 > 
 > it looks like this is the triggering change:
 > 
 > RCS file: /usr/cvs/src/sys/amd64/amd64/busdma_machdep.c,v
 > ----------------------------
 > revision 1.81
 > date: 2007/05/29 06:30:25;  author: yongari;  state: Exp;  lines: +2 -0
 > Honor maxsegsz of less than a page size in a DMA tag. Previously it
 > used to return PAGE_SIZE without respect to restrictions of a DMA tag.
 > This affected all of the busdma load functions that use
 > _bus_dmamap_loader_buffer() as their back-end.
 > 
 > so the questions are...
 > 
 > Is the above change wrong?
 > or is the "de" driver buggy?
 > or should bus_dmamap_load_mbuf handle this somehow?
 > and does it cause problems other places too?
 > 

For a record, fix commited to HEAD(if_de.c rev. 1.183).

-- 
Regards,
Pyun YongHyeon



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070607002933.GB23001>