Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 24 Aug 2003 15:16:24 -0600
From:      "Andrew Lankford" <arlankfo@141.com>
To:        <sos@freebsd.org>
Cc:        current@freebsd.org
Subject:   atang problem:  my cdrw isn't detected
Message-ID:  <200308241516.AA1727201612@141.com>

next in thread | raw e-mail | index | archive | help
After I rebooted from a make world, I found that my dvdrom device
now occupies /dev/acd0 instead of /dev/acd1 and my plextor 8/4/32A
is nowhere to be seen.  Here's a snippet from my last good boot:

ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master UDMA100
acd0: CD-RW <PLEXTOR CD-R PX-W8432T> at ata1-master PIO4
acd1: DVD-ROM <HITACHI DVD-ROM GD-7500> at ata1-slave PIO4
cd0 at ata1 bus 0 target 0 lun 0
cd0: <PLEXTOR CD-R   PX-W8432T 1.09> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray c
losed
cd1 at ata1 bus 0 target 1 lun 0
cd1: <HITACHI DVD-ROM GD-7500 0005> Removable CD-ROM SCSI-0 device
cd1: 16.000MB/s transfers
cd1: cd present [263133 x 2048 byte records]

After commenting out the atapicam and scsi devices and then 
upgrading, I booted up o.k, but this is what I'm left with:


#atacontrol list

ATA channel 0:
    Master:  ad0 <IBM-DTLA-307030/TX4OA5AA> ATA/ATAPI rev 5
    Slave:       no device present
ATA channel 1:
    Master:      <\xff \xff \xff \xff \xff \xff \xff \xff \xff \xff \xff \xff \x
ff \xff \xff \xff \xff \xff \xff \xff/\xff \xff \xff \xff> ATA/ATAPI rev 15
    Slave:  acd0 <HITACHI DVD-ROM GD-7500/0005> ATA/ATAPI rev 0

#dmesg

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #17: Sun Aug 24 15:16:41 EDT 2003
    root@bogushost2:/usr/obj/usr/src/sys/ARL5KERNEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04e2000.
Preloaded elf module "/boot/kernel/vesa.ko" at 0xc04e221c.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc04e22c8.
Preloaded elf module "/boot/kernel/if_sis.ko" at 0xc04e2374.
Preloaded elf module "/boot/kernel/if_xl.ko" at 0xc04e2420.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc04e24cc.
Preloaded elf module "/boot/kernel/snd_es137x.ko" at 0xc04e2578.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc04e2628.
Preloaded elf module "/boot/kernel/ums.ko" at 0xc04e26d0.
Preloaded elf module "/boot/kernel/agp.ko" at 0xc04e2778.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04e2820.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (737.02-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR,SSE>
real memory  = 535736320 (510 MB)
avail memory = 515031040 (491 MB)
Pentium Pro MTRR support enabled
VESA: v3.0, 1024k memory, flags:0x1, mode table:0xc03fdc62 (1000022)
VESA: Intel(R) 810, Intel(R) 815 Chipset Video BIOS
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS   CUSL2   > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00f1360
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 2 INTA is routed to irq 11
pcib0: slot 31 INTD is routed to irq 9
pcib0: slot 31 INTB is routed to irq 10
pcib0: slot 31 INTC is routed to irq 9
agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0xf7000000-0xf707ffff,0xf800
0000-0xfbffffff irq 11 at device 2.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 9 INTA is routed to irq 9
pcib1: slot 12 INTA is routed to irq 9
pcib1: slot 14 INTA is routed to irq 5
sis0: <NatSemi DP83815 10/100BaseTX> port 0xd800-0xd8ff mem 0xf6800000-0xf6800ff
f irq 9 at device 9.0 on pci1
sis0: Ethernet address: 00:02:e3:1c:cf:9e
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd400-0xd47f mem 0xf6000000-0xf600
007f irq 9 at device 12.0 on pci1
xl0: Ethernet address: 00:01:02:73:ee:49
miibus1: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus1
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <Creative CT5880-C> port 0xd000-0xd03f irq 5 at device 14.0 on pci1
pcm0: <SigmaTel STAC9721/23 AC97 Codec>
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0xb800-0xb80f at device 31.1 on pc
i0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb400-0xb41f irq 9 
at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xe800-0xe80f irq 10 at de
vice 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 
at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2
uhub2: 4 ports with 4 removable, self powered
speaker0 port 0x61 on acpi0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0
x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
pmtimer0 on isa0
orm0: <Option ROMs> at iomem 0xd0000-0xd07ff,0xcc000-0xcffff,0xc0000-0xcbfff on 
isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 737021916 Hz quality 800
Timecounters tick every 10.000 msec
IPv6 packet filtering initialized, default to accept, logging limited to 1 packe
ts/entry
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to de
ny, logging disabled
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master UDMA100
acd0: DVDROM <HITACHI DVD-ROM GD-7500> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s4a
 


 
                   



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200308241516.AA1727201612>