Date: Sat, 9 Jan 1999 15:54:38 +0100 (CET) From: Are Bryne <are@communique.no> To: Paul Richards <paul@originative.co.uk> Cc: "'Luigi Rizzo'" <luigi@labinfo.iet.unipi.it>, freebsd-stable@FreeBSD.ORG, se@FreeBSD.ORG Subject: RE: Change in lnc code since 2.2.7? Message-ID: <Pine.BSF.4.05.9901091552450.433-100000@rune.communique.no> In-Reply-To: <E40CBF0361C7D111914000C0F0303D1087E8@OCTOPUS>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello Paul, Have you had any time to look into this problem yet? Thanks in advance. Are Bryne On Mon, 23 Nov 1998, Paul Richards wrote: > Weird. It looks like I need to spend some time overhauling this driver. > I'll take a look into it over the next week. I've also promised Doug I'd > look at getting the floppy driver working on the alpha so I'd like to > get that done before I delve into the lnc code again. > > Paul Richards Ph.D. > Originative Solutions Ltd > > > > -----Original Message----- > > From: Luigi Rizzo [mailto:luigi@labinfo.iet.unipi.it] > > Sent: Monday, November 23, 1998 7:04 AM > > To: are.bryne@communique.no > > Cc: freebsd-stable@FreeBSD.ORG; se@FreeBSD.ORG > > Subject: Re: Change in lnc code since 2.2.7? > > > > > > > Hello, > > > > > > I set up FreeBSD 2.2.7 on a Compaq Deskpro 5100 a little > > while ago. This > > > computer has a built-in network adapter that is identified > > by BIOS/Setup > > > as either an AMD Ethernet card or an Integrated NetFlex-L ENET. > > ... > > > So now I tried returning to the old driver with the new > > sources. This only > > > gave me this at boot: > > > > > > lnc1 <PCNet/PCI Ethernet adapter> rev 2 int a irq 10 on pci0:11:0 > > > > > > It seems as if the card is not recognized properly anymore. > > Just to be > > > sure that this is software related, I've tried an old > > kernel, which worked > > > fine. > > > > hmmm... i noticed the same on 3.0 -- I have 2.2.6 working > > here with the > > lnc driver -- and i thought i screwed up something in my 3.0 install; > > evidently not! > > > > luigi To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9901091552450.433-100000>