Date: Mon, 19 Jan 2004 11:57:11 -0500 From: Bill Reid <wer@cstone.net> To: "Ulrik F. Thyve" <thul@yazzy.org> Cc: freebsd-multimedia@freebsd.org Subject: Re: Error when trying to use BKTR Message-ID: <400C0C67.2080600@cstone.net> In-Reply-To: <49230.129.240.114.218.1071011509.squirrel@gorset.no> References: <49230.129.240.114.218.1071011509.squirrel@gorset.no>
next in thread | previous in thread | raw e-mail | index | archive | help
Is there a reason you are not using the modules? Update /boot/loader.conf to include the following. bktr_mem_load="YES" bktr_load="YES" -=Bill Ulrik F. Thyve wrote: >I have a hauppauge wintv pci card. I get this error when i try to load it: >I have acpi disabled, pnp-OS in bios disabled. I have tried to move the >card around in different pci-slots, but it doesen't seem to work. > >any ideas? > >bktr0: <BrookTree 878> mem 0xe7ef6000-0xe7ef6fff irq 7 at device 9.0 on pci2 >bktr0: could not map memory >device_probe_and_attach: bktr0 attach returned 6 >pci2: <multimedia> at device 9.1 (no driver attached) > > >my kernel config: > > >#tv stash >device bktr >device iicbus >device iicbb >device smbus >options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PA > > >the entire dmesg: > > > > >Copyright (c) 1992-2003 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. >FreeBSD 5.1-RELEASE #4: Tue Dec 9 23:00:13 CET 2003 > thul@masada:/usr/obj/usr/src/sys/CMFGATE >Preloaded elf kernel "/boot/kernel/kernel" at 0xc0713000. >Timecounter "i8254" frequency 1193182 Hz >Timecounter "TSC" frequency 2639766140 Hz >CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2639.77-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Hyperthreading: 2 logical CPUs >real memory = 1072889856 (1023 MB) >avail memory = 1034756096 (986 MB) >Pentium Pro MTRR support enabled >npx0: <math processor> on motherboard >npx0: INT 16 interface >pcibios: BIOS version 2.10 >Using $PIR table, 14 entries at 0xc00f5420 >pcib0: <Host to PCI bridge> at pcibus 0 on motherboard >pci0: <PCI bus> on pcib0 >agp0: <Intel Generic host to PCI bridge> mem 0xf4000000-0xf7ffffff at >device 0.0 on pci0 >pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0 >pci1: <PCI bus> on pcib1 >pci1: <display, VGA> at device 0.0 (no driver attached) >pci1: <display> at device 0.1 (no driver attached) >uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xef00-0xef1f irq >10 at device 29.0 on pci0 >usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 >usb0: USB revision 1.0 >uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >uhub0: 2 ports with 2 removable, self powered >ums0: Logitech USB Mouse, rev 1.10/6.10, addr 2, iclass 3/1 >ums0: 4 buttons and Z dir. >ugen0: Creative product 0x400c, rev 1.10/0.02, addr 3 >uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef20-0xef3f irq >3 at device 29.1 on pci0 >usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 >usb1: USB revision 1.0 >uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >uhub1: 2 ports with 2 removable, self powered >uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef40-0xef5f irq >5 at device 29.2 on pci0 >usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 >usb2: USB revision 1.0 >uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >uhub2: 2 ports with 2 removable, self powered >uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef80-0xef9f irq >10 at device 29.3 on pci0 >usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 >usb3: USB revision 1.0 >uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >uhub3: 2 ports with 2 removable, self powered >pci0: <serial bus, USB> at device 29.7 (no driver attached) >pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0 >pci2: <PCI bus> on pcib2 >bktr0: <BrookTree 878> mem 0xe7ef6000-0xe7ef6fff irq 7 at device 9.0 on pci2 >bktr0: could not map memory >device_probe_and_attach: bktr0 attach returned 6 >pci2: <multimedia> at device 9.1 (no driver attached) >pcm0: <Creative EMU10K1> port 0xdf80-0xdf9f irq 11 at device 11.0 on pci2 >pcm0: <SigmaTel STAC9721/23 AC97 Codec> >xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem >0xfeaffc00-0xfeaffc7f irq 7 at device 13.0 on pci2 >xl0: Ethernet address: 00:04:75:d1:a3:ef >miibus0: <MII bus> on xl0 >ukphy0: <Generic IEEE 802.3u media interface> on miibus0 >ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >isab0: <PCI-ISA bridge> at device 31.0 on pci0 >isa0: <ISA bus> on isab0 >atapci0: <Intel ICH5 UDMA100 controller> port >0xfc00-0xfc0f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0 >ata0: at 0x1f0 irq 14 on atapci0 >ata1: at 0x170 irq 15 on atapci0 >pci0: <serial bus, SMBus> at device 31.3 (no driver attached) >orm0: <Option ROM> at iomem 0xc0000-0xccfff on isa0 >pmtimer0 on isa0 >atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 >atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 >kbd0 at atkbd0 >fdc0: ready for input in output >fdc0: cmd 3 failed at out byte 1 of 3 >ppc0: parallel port not found. >sc0: <System console> at flags 0x100 on isa0 >sc0: VGA <16 virtual consoles, flags=0x300> >sio0: configured irq 4 not in bitmap of probed irqs 0 >sio0: port may not be enabled >sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 >sio0: type 8250 or not responding >sio1: configured irq 3 not in bitmap of probed irqs 0 >sio1: port may not be enabled >vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >unknown: <PNP0303> can't assign resources (port) >Timecounters tick every 10.000 msec >ad0: 114473MB <WDC WD1200JB-00CRA1> [232581/16/63] at ata0-master PIO4 >ad1: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata0-slave PIO4 >acd0: CD-RW <AOPEN CD-RW CRW5224 1.05 20021212> at ata1-master PIO4 >acd1: DVD-ROM <AOpen 12xDVD-ROM DRIVE 10042000> at ata1-slave PIO4 >Mounting root from ufs:/dev/ad0s1a >WARNING: / was not properly dismounted >WARNING: /tmp was not properly dismounted >WARNING: /usr was not properly dismounted >WARNING: /var was not properly dismounted >drm0: <ATI Radeon If R250 9000> port 0xc000-0xc0ff mem >0xfe9f0000-0xfe9fffff,0xe8000000-0xebffffff irq 10 at device 0.0 on pci1 >info: [drm] AGP at 0xf4000000 64MB >info: [drm] Initialized radeon 1.8.0 20020828 on minor 0 >bktr0: <BrookTree 878> mem 0xe7ef6000-0xe7ef6fff irq 7 at device 9.0 on pci2 >bktr0: could not map memory >device_probe_and_attach: bktr0 attach returned 6 >info: [drm] Loading R200 Microcode > > > > >_______________________________________________ >freebsd-multimedia@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia >To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@freebsd.org" > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?400C0C67.2080600>