Date: Fri, 27 Feb 2009 13:34:30 +0100 From: "Niels S. Eliasen" <nse@delfi-konsult.com> To: freebsd-ppc@freebsd.org Subject: Xorg and TiBook ? Message-ID: <34371109-F6D6-475F-9FF9-C242AA37E2E9@delfi-konsult.com>
next in thread | raw e-mail | index | archive | help
--Apple-Mail-388--267167280 Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes Content-Transfer-Encoding: 7bit Hi guys Any tips etc for making an "xorg.conf" on a TiBook 400Mhz ?? Ive tried both the "Xorg -configure" and xorgconfig, and "xorgconfig" gave me the best result.... But still I get the following errors: > (II) VESA: driver for VESA chipsets: vesa > (II) VGA: Generic VGA driver (version 4.1) for chipsets: generic > (WW) xf86EnableIO 5 > (II) xf86EnableIO: ffffffff > (WW) Can't map IO space! > (II) Primary Device is: PCI 00:10:0 > (EE) No devices detected. > > Fatal server error: > no screens found > the Xorg.log has been attached..... PS: the "freenx" port actually do compile when you remove the "386" dependencies .... ;-) kind regards nse "Ach, crivens, what a wee snotter....." Quote from "The Wee Free Men" by Terry Pratchett --Apple-Mail-388--267167280 Content-Disposition: attachment; filename=Xorg.0.log Content-Type: application/octet-stream; x-unix-mode=0644; name="Xorg.0.log" Content-Transfer-Encoding: 7bit X.Org X Server 1.4.2 Release Date: 11 June 2008 X Protocol Version 11, Revision 0 Build Operating System: FreeBSD 7.1-RELEASE powerpc Current Operating System: FreeBSD munin.delfi-konsult.com 7.1-RELEASE FreeBSD 7.1-RELEASE #0: Sat Feb 14 12:54:02 CET 2009 root@munin.delfi-konsult.com:/usr/src/sys/powerpc/compile/munin powerpc Build Date: 27 January 2009 01:31:35PM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 27 11:19:02 2009 (EE) Unable to locate/open config file (II) Loader magic: 0x19bcf54 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 2.0 X.Org XInput driver : 2.0 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on freebsd (II) LoadModule: "pcidata" (II) Loading /usr/local/lib/xorg/modules//libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 2.0 (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 (WW) OS did not count PCI devices, guessing wildly (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:0b:0: chip 106b,0020 card 0000,0000 rev 00 class 06,00,00 hdr 00 (II) PCI: 00:10:0: chip 1002,4c46 card 1002,4c46 rev 02 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:11:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (--) PCI:*(0:16:0) ATI Technologies Inc Rage Mobility M3 AGP 2x rev 2, Mem @ 0xb4000000/26, 0xb0000000/14, I/O @ 0x0400/8, BIOS @ 0xb0020000/17 New driver is "ati" (==) Using default built-in configuration (55 lines) (==) --- Start of built-in configuration --- Section "Module" Load "extmod" Load "dbe" Load "glx" Load "freetype" Load "type1" Load "record" Load "dri" EndSection Section "Monitor" Identifier "Builtin Default Monitor" EndSection Section "Device" Identifier "Builtin Default ati Device 0" Driver "ati" EndSection Section "Screen" Identifier "Builtin Default ati Screen 0" Device "Builtin Default ati Device 0" Monitor "Builtin Default Monitor" EndSection Section "Device" Identifier "Builtin Default fbdev Device 0" Driver "fbdev" EndSection Section "Screen" Identifier "Builtin Default fbdev Screen 0" Device "Builtin Default fbdev Device 0" Monitor "Builtin Default Monitor" EndSection Section "Device" Identifier "Builtin Default vesa Device 0" Driver "vesa" EndSection Section "Screen" Identifier "Builtin Default vesa Screen 0" Device "Builtin Default vesa Device 0" Monitor "Builtin Default Monitor" EndSection Section "Device" Identifier "Builtin Default vga Device 0" Driver "vga" EndSection Section "Screen" Identifier "Builtin Default vga Screen 0" Device "Builtin Default vga Device 0" Monitor "Builtin Default Monitor" EndSection Section "ServerLayout" Identifier "Builtin Default Layout" Screen "Builtin Default ati Screen 0" Screen "Builtin Default fbdev Screen 0" Screen "Builtin Default vesa Screen 0" Screen "Builtin Default vga Screen 0" EndSection (==) --- End of built-in configuration --- (==) ServerLayout "Builtin Default Layout" (**) |-->Screen "Builtin Default ati Screen 0" (0) (**) | |-->Monitor "Builtin Default Monitor" (**) | |-->Device "Builtin Default ati Device 0" (**) |-->Screen "Builtin Default fbdev Screen 0" (1) (**) | |-->Monitor "Builtin Default Monitor" (**) | |-->Device "Builtin Default fbdev Device 0" (**) |-->Screen "Builtin Default vesa Screen 0" (2) (**) | |-->Monitor "Builtin Default Monitor" (**) | |-->Device "Builtin Default vesa Device 0" (**) |-->Screen "Builtin Default vga Screen 0" (3) (**) | |-->Monitor "Builtin Default Monitor" (**) | |-->Device "Builtin Default vga Device 0" (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (==) FontPath set to: /usr/local/lib/X11/fonts/misc/, /usr/local/lib/X11/fonts/TTF/, /usr/local/lib/X11/fonts/OTF, /usr/local/lib/X11/fonts/Type1/, /usr/local/lib/X11/fonts/100dpi/, /usr/local/lib/X11/fonts/75dpi/ (==) RgbPath set to "/usr/local/share/X11/rgb" (==) ModulePath set to "/usr/local/lib/xorg/modules" (==) |-->Input Device "<default pointer>" (==) |-->Input Device "<default keyboard>" (==) The core pointer device wasn't specified explicitly in the layout. Using the default mouse configuration. (==) The core keyboard device wasn't specified explicitly in the layout. Using the default keyboard configuration. (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xb0020000 - 0xb003ffff (0x20000) MX[B](B) [1] -1 0 0xb0000000 - 0xb0003fff (0x4000) MX[B](B) [2] -1 0 0xb4000000 - 0xb7ffffff (0x4000000) MX[B](B) [3] -1 0 0x00000400 - 0x000004ff (0x100) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xb0020000 - 0xb003ffff (0x20000) MX[B](B) [1] -1 0 0xb0000000 - 0xb0003fff (0x4000) MX[B](B) [2] -1 0 0xb4000000 - 0xb7ffffff (0x4000000) MX[B](B) [3] -1 0 0x00000400 - 0x000004ff (0x100) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) All system resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xb0020000 - 0xb003ffff (0x20000) MX[B](B) [5] -1 0 0xb0000000 - 0xb0003fff (0x4000) MX[B](B) [6] -1 0 0xb4000000 - 0xb7ffffff (0x4000000) MX[B](B) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] -1 0 0x00000400 - 0x000004ff (0x100) IX[B](B) (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "freetype" will be loaded. This was enabled by default and also specified in the config file. (II) "type1" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded. This was enabled by default and also specified in the config file. (II) "dri" will be loaded. This was enabled by default and also specified in the config file. (II) LoadModule: "extmod" (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (==) AIGLX disabled (II) Loading extension GLX (II) LoadModule: "freetype" (II) Loading /usr/local/lib/xorg/modules/fonts//libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 1.4.2, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "type1" (II) Loading /usr/local/lib/xorg/modules/fonts//libtype1.so (II) Module type1: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Type1 (II) LoadModule: "record" (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading extension XFree86-DRI (II) LoadModule: "ati" (II) Loading /usr/local/lib/xorg/modules/drivers//ati_drv.so (II) Module ati: vendor="X.Org Foundation" compiled for 1.4.2, module version = 6.9.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 2.0 (II) LoadModule: "r128" (II) Loading /usr/local/lib/xorg/modules/drivers//r128_drv.so (II) Module r128: vendor="X.Org Foundation" compiled for 1.4.2, module version = 6.8.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 2.0 (II) LoadModule: "fbdev" (WW) Warning, couldn't open module fbdev (II) UnloadModule: "fbdev" (EE) Failed to load module "fbdev" (module does not exist, 0) (II) LoadModule: "vesa" (II) Loading /usr/local/lib/xorg/modules/drivers//vesa_drv.so (II) Module vesa: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.3.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 2.0 (II) LoadModule: "vga" (II) Loading /usr/local/lib/xorg/modules/drivers//vga_drv.so (II) Module vga: vendor="X.Org Foundation" compiled for 1.4.2, module version = 4.1.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 2.0 (II) LoadModule: "mouse" (II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.2.3 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0 (II) LoadModule: "kbd" (II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.2.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0 (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP), ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP), ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP), ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI), ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP), ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP), ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP), ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP), ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP), ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI), ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI), ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP), ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP), ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP), ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI), ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP), ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP), ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP), ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP), ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?), ATI Rage 128 Pro ULTRA TU (AGP?) (II) VESA: driver for VESA chipsets: vesa (II) VGA: Generic VGA driver (version 4.1) for chipsets: generic (WW) xf86EnableIO 5 (II) xf86EnableIO: ffffffff (WW) Can't map IO space! (II) Primary Device is: PCI 00:10:0 (EE) No devices detected. Fatal server error: no screens found --Apple-Mail-388--267167280 Content-Type: text/plain; charset=US-ASCII; format=flowed Content-Transfer-Encoding: 7bit --Apple-Mail-388--267167280--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?34371109-F6D6-475F-9FF9-C242AA37E2E9>