Date: Thu, 08 Feb 2007 11:32:23 -0600 From: "Jeremy Messenger" <mezz7@cox.net> To: "George Kontostanos" <gkontos.mail@gmail.com> Cc: freebsd-gnome@freebsd.org Subject: Re: Hald and crashes Message-ID: <op.tnfxn9ql9aq2h7@mezz.mezzweb.com> In-Reply-To: <f4775d410702070532v315c0d42m85b80a8fda81c494@mail.gmail.com> References: <f4775d410702070532v315c0d42m85b80a8fda81c494@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 07 Feb 2007 07:32:27 -0600, George Kontostanos = <gkontos.mail@gmail.com> wrote: > Greeting everyone, > I'm sorry if this has been discussed before but a search on the list = > didn't > show any info. > I'm running FreeBSD 6.2 release and Gnome 2.16.3. > Whenever I enable hald in my rc.conf I get system crashes and nothing = is > logged in the messages neither core dumbs. It usually happens when = > surfing > the net with Firefox. The system freezes for 3-4 sec. and the reboots.= It > has also happened without using Firefox so I don't think it is related= . = > May > I mention that X-org and gnome is build from ports. The system is an= = > intel > Core 2 duo with 2 gigs of ram. I'm also using the latest nvidia driver= . I have no idea if we have a same problem, so it might be same or = different. I get same crash issue, but I still get crash even when I don= 't = have HAL enable and I was using fluxbox-devel. I had to switch the WM to= = make sure if it's WM issue or not. However, I had to downgrade the = nvidia-driver to 1.0.8776 and it seems help as it's about 7 days uptime = = now so far. Cheers, Mezz > Any help much appreciated. > > My rc.conf: > > defaultrouter=3D"10.10.10.1" > hostname=3D"core2duo.aicom.loc" > ifconfig_xl0=3D"inet 10.10.10.6 netmask 255.255.255.0" > keymap=3D"el.iso07" > moused_enable=3D"YES" > clear_tmp_enable=3D"YES" > sshd_enable=3D"YES" > usbd_enable=3D"YES" > compat5_enable=3D"YES" > linux_enable=3D"YES" > gdm_enable=3D"YES" > dbus_enable=3D"YES" > polkitd_enable=3D"YES" > apcupsd_enable=3D"YES" > cupsd_enable=3D"YES" > > > My dmesg: > Copyright (c) 1992-2007 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 19= 94 > The Regents of the University of California. All rights reserv= ed. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 6.2-RELEASE #2: Fri Jan 12 14:05:35 EET 2007 > gkontos@core2duo.aicom.loc:/usr/obj/usr/src/sys/CORE2DUO > ACPI APIC Table: <A M I OEMAPIC > > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz (2401.93-MHz = > 686-class > CPU) > Origin =3D "GenuineIntel" Id =3D 0x6f6 Stepping =3D 6 > > Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR= ,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE= > > Features2=3D0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>= ,<b15>> > AMD Features=3D0x20100000<NX,LM> > AMD Features2=3D0x1<LAHF> > Cores per package: 2 > real memory =3D 2147090432 (2047 MB) > avail memory =3D 2087559168 (1990 MB) > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > kbd1 at kbdmux0 > ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, = > RF5413) > acpi0: <A M I OEMRSDT> on motherboard > acpi_bus_number: can't get _ADR > acpi_bus_number: can't get _ADR > acpi_bus_number: can't get _ADR > acpi_bus_number: can't get _ADR > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: <ACPI CPU> on acpi0 > acpi_perf0: <ACPI CPU Frequency Control> on cpu0 > cpu1: <ACPI CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > nvidia0: <GeForce 7300 GT> port 0x8c00-0x8c7f mem > 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xfc000000-0xfcffffff irq = 16 = > at > device 0.0 on pci1 > nvidia0: [GIANT-LOCKED] > uhci0: <UHCI (generic) USB controller> port 0xdc00-0xdc1f irq 16 at = > device > 26.0 on pci0 > uhci0: [GIANT-LOCKED] > usb0: <UHCI (generic) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 17 at = > device > 26.1 on pci0 > uhci1: [GIANT-LOCKED] > usb1: <UHCI (generic) USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebffc00-0xfebfffff i= rq = > 18 > at device 26.7 on pci0 > ehci0: [GIANT-LOCKED] > usb2: waiting for BIOS to give up control > usb2: EHCI version 1.0 > usb2: companion controllers, 2 ports each: usb0 usb1 > usb2: <EHCI (generic) USB 2.0 controller> on ehci0 > usb2: USB revision 2.0 > uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub2: 4 ports with 4 removable, self powered > pcm0: <Intel 82801H High Definition Audio Controller> mem > 0xfebf8000-0xfebfbfff irq 22 at device 27.0 on pci0 > pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 > pci4: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 > pci3: <ACPI PCI bus> on pcib3 > re0: <RealTek 8168B/8111B PCIe Gigabit Ethernet> port 0xa800-0xa8ff me= m > 0xfe9ff000-0xfe9fffff irq 19 at device 0.0 on pci3 > miibus0: <MII bus> on re0 > rgephy0: <RTL8169S/8110S media interface> on miibus0 > rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, > 1000baseTX-FDX, auto > re0: Ethernet address: 00:18:f3:03:66:7e > re0: [FAST] > pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 > pci2: <ACPI PCI bus> on pcib4 > atapci0: <JMicron JMB363 SATA300 controller> port > 0x9c00-0x9c07,0x9880-0x9883,0x9800-0x9807,0x9480-0x9483,0x9400-0x940f = mem > 0xfe8fe000-0xfe8fffff irq 16 at d > evice 0.0 on pci2 > atapci0: AHCI Version 01.00 controller with 2 ports detected > ata2: <ATA channel 0> on atapci0 > ata3: <ATA channel 1> on atapci0 > ata4: <ATA channel 2> on atapci0 > uhci2: <UHCI (generic) USB controller> port 0xd480-0xd49f irq 23 at = > device > 29.0 on pci0 > uhci2: [GIANT-LOCKED] > usb3: <UHCI (generic) USB controller> on uhci2 > usb3: USB revision 1.0 > uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub3: 2 ports with 2 removable, self powered > uhci3: <UHCI (generic) USB controller> port 0xd800-0xd81f irq 19 at = > device > 29.1 on pci0 > uhci3: [GIANT-LOCKED] > usb4: <UHCI (generic) USB controller> on uhci3 > usb4: USB revision 1.0 > uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub4: 2 ports with 2 removable, self powered > uhci4: <UHCI (generic) USB controller> port 0xd880-0xd89f irq 18 at = > device > 29.2 on pci0 > uhci4: [GIANT-LOCKED] > usb5: <UHCI (generic) USB controller> on uhci4 > usb5: USB revision 1.0 > uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub5: 2 ports with 2 removable, self powered > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfebff800-0xfebffbff i= rq = > 23 > at device 29.7 on pci0 > ehci1: [GIANT-LOCKED] > usb6: EHCI version 1.0 > usb6: companion controllers, 2 ports each: usb3 usb4 usb5 > usb6: <EHCI (generic) USB 2.0 controller> on ehci1 > usb6: USB revision 2.0 > uhub6: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub6: 6 ports with 6 removable, self powered > umass0: HLDS Inc. Super Multi DVD Rewriter, rev 2.00/0.01, addr 2 > pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci5: <ACPI PCI bus> on pcib5 > xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xbc00-0xbc7f mem > 0xfeaffc00-0xfeaffc7f irq 22 at device 1.0 on pci5 > miibus1: <MII bus> on xl0 > xlphy0: <3Com internal media interface> on miibus1 > xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > xl0: Ethernet address: 00:01:02:11:f3:94 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci1: <Intel ICH8 SATA300 controller> port > 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f,= 0xe080-0xe08f > irq 19 at device 31.2 on pc > i0 > ata5: <ATA channel 0> on atapci1 > ata6: <ATA channel 1> on atapci1 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > atapci2: <Intel ICH8 SATA300 controller> port > 0xd400-0xd407,0xd080-0xd083,0xd000-0xd007,0xcc00-0xcc03,0xc880-0xc88f,= 0xc800-0xc80f > irq 19 at device 31.5 on pc > i0 > ata7: <ATA channel 0> on atapci2 > ata8: <ATA channel 1> on atapci2 > acpi_button0: <Power Button> on acpi0 > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 o= n > acpi0 > sio0: type 16550A > fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq= 2 = > on > acpi0 > fdc0: [FAST] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 d= rq = > 3 > on acpi0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/9 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model IntelliMouse, device ID 3 > pmtimer0 on isa0 > ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 > ata1 at port 0x170-0x177,0x376 irq 15 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=3D0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on i= sa0 > ugen0: American Power Conversion Back-UPS BF500 FW:814.s3.I USB FW:s3= , = > rev > 1.10/1.06, addr 2 > Timecounters tick every 1.000 msec > acd0: DVDROM <ASUS DVD-E616A2/1.03> at ata4-master UDMA100 > ad10: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata5-master SATA150 > pcm0: <HDA Codec: Analog Device (Unknown)> > pcm0: <HDA Driver Revision: 20061210_0037> > SMP: AP CPU #1 Launched! > cd0 at umass-sim0 bus 0 target 0 lun 0 > cd0: <HL-DT-ST DVDRRW GSA-2166D 1.01> Removable CD-ROM SCSI-0 device > cd0: 40.000MB/s transfers > cd0: Attempt to query device size failed: NOT READY, Medium not presen= t > Trying to mount root from ufs:/dev/ad10s3a > > Regards, > George -- = mezz7@cox.net - mezz@FreeBSD.org FreeBSD GNOME Team - FreeBSD Multimedia Hat (ports, not src) http://www.FreeBSD.org/gnome/ - gnome@FreeBSD.org http://wiki.freebsd.org/multimedia - multimedia@FreeBSD.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?op.tnfxn9ql9aq2h7>