Date: Tue, 22 Feb 2011 14:28:55 +0100 From: Damien Fleuriot <ml@my.gd> To: Ryan Stone <rysto32@gmail.com> Cc: freebsd-hackers@freebsd.org Subject: Re: LAGG - interface comes up but no laggports Message-ID: <4D63BA17.60003@my.gd> In-Reply-To: <AANLkTi=GsQ1c1HJn=_TrpOm4x%2BwRR=wuzNdzx4L9u-mE@mail.gmail.com> References: <4D639E96.70902@my.gd> <AANLkTi=GsQ1c1HJn=_TrpOm4x%2BwRR=wuzNdzx4L9u-mE@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2/22/11 1:51 PM, Ryan Stone wrote:
> On Tue, Feb 22, 2011 at 6:31 AM, Damien Fleuriot <ml@my.gd> wrote:
>> ifconfig_lagg0="laggproto failover laggport em0 laggport em1"
>> ipv4_addrs_lagg0="192.168.1.3/29"
>> ifconfig_lagg0="inet6 fe80::3/64"
>
> You're setting ifconfig_lagg0 twice, so the first setting is being
> discarded. Off-hand I'm not sure how you're supposed to configure
> ipv6 addresses. There's nothing in the man page about an
> ipv6_addrs_lagg0 variable but that would be the obvious thing to try,
ipv6_addrs_XXX doesn't do the trick, however this one does:
ipv6_ifconfig_lagg0="fe80::3/64"
lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 9014
options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4>
ether 00:15:17:37:17:e6
inet6 fe80::215:17ff:fe37:17e6%lagg0 prefixlen 64 scopeid 0x5
inet 192.168.1.3 netmask 0xfffffff8 broadcast 192.168.1.7
inet6 fe80::3%lagg0 prefixlen 64 scopeid 0x5
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
media: Ethernet autoselect
status: active
laggproto failover
laggport: em1 flags=0<>
laggport: em0 flags=5<MASTER,ACTIVE>
For a reason that eludes me, the interface still insists on getting an
automatic link local address, but I'll look into this ;)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4D63BA17.60003>