Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 12 Jul 2013 17:09:50 +0000 (UTC)
From:      "Kenneth D. Merry" <ken@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org
Subject:   svn commit: r253274 - head/sys/cam/scsi
Message-ID:  <201307121709.r6CH9oZr078053@svn.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: ken
Date: Fri Jul 12 17:09:50 2013
New Revision: 253274
URL: http://svnweb.freebsd.org/changeset/base/253274

Log:
  Fix a problem with READ ELEMENT STATUS that occurs on some
  changers that don't support the DVCID and CURDATA bits that were
  introduced in the SMC spec.
  
  These changers will return an Illegal Request type error if the
  bits are set.  This causes "chio status" to fail.
  
  The fix is two-fold.  First, for changers that claim to be SCSI-2
  or older, don't set the DVCID and CURDATA bits for READ ELEMENT
  STATUS.  For newer changers (SCSI-3 and newer), we default to
  setting the new bits, but back off and try the READ ELEMENT STATUS
  without the bits if we get an Illegal Request type error.
  
  This has been tested on a Qualstar TLS-8211, which is a SCSI-2
  changer that does not support the new bits, and a Spectra T-380,
  which is a SCSI-3 changer that does support the new bits.  In the
  absence of a SCSI-3 changer that does not support the bits, I
  tested that with some error injection code.  (The SMC spec says
  that support for CURDATA is mandatory, and DVCID is optional.)
  
  scsi_ch.c:	Add a new quirk, CH_Q_NO_DVCID that gets set for
  		SCSI-2 and older libraries, or newer libraries that
  		report errors when the DVCID/CURDATA bits are set.
  
  		In chgetelemstatus(), use the new quirk to
  		determine whether or not to set DVCID and CURDATA.
  		If we get an error with the bits set, back off and
  		try without the bits.  Set the quirk flag if the
  		read element status succeeds without the bits set.
  
  		Increase the READ ELEMENT STATUS timeout to 60
  		seconds after testing with a Spectra T-380.  The
  		previous value was 10 seconds, and too short for
  		the T-380.  This may be decreased later after
  		some additional testing and investigation.
  
  Tested by:	Andre Albsmeier <Andre.Albsmeier@siemens.com>
  Sponsored by:	Spectra Logic
  MFC after:	3 days

Modified:
  head/sys/cam/scsi/scsi_ch.c

Modified: head/sys/cam/scsi/scsi_ch.c
==============================================================================
--- head/sys/cam/scsi/scsi_ch.c	Fri Jul 12 16:41:58 2013	(r253273)
+++ head/sys/cam/scsi/scsi_ch.c	Fri Jul 12 17:09:50 2013	(r253274)
@@ -102,7 +102,7 @@ static const u_int32_t	CH_TIMEOUT_MODE_S
 static const u_int32_t	CH_TIMEOUT_MOVE_MEDIUM               = 100000;
 static const u_int32_t	CH_TIMEOUT_EXCHANGE_MEDIUM           = 100000;
 static const u_int32_t	CH_TIMEOUT_POSITION_TO_ELEMENT       = 100000;
-static const u_int32_t	CH_TIMEOUT_READ_ELEMENT_STATUS       = 10000;
+static const u_int32_t	CH_TIMEOUT_READ_ELEMENT_STATUS       = 60000;
 static const u_int32_t	CH_TIMEOUT_SEND_VOLTAG		     = 10000;
 static const u_int32_t	CH_TIMEOUT_INITIALIZE_ELEMENT_STATUS = 500000;
 
@@ -122,12 +122,14 @@ typedef enum {
 
 typedef enum {
 	CH_Q_NONE	= 0x00,
-	CH_Q_NO_DBD	= 0x01
+	CH_Q_NO_DBD	= 0x01,
+	CH_Q_NO_DVCID	= 0x02
 } ch_quirks;
 
 #define CH_Q_BIT_STRING	\
 	"\020"		\
-	"\001NO_DBD"
+	"\001NO_DBD"	\
+	"\002NO_DVCID"
 
 #define ccb_state	ppriv_field0
 #define ccb_bp		ppriv_ptr1
@@ -396,6 +398,14 @@ chregister(struct cam_periph *periph, vo
 	periph->softc = softc;
 	softc->quirks = CH_Q_NONE;
 
+	/*
+	 * The DVCID and CURDATA bits were not introduced until the SMC
+	 * spec.  If this device claims SCSI-2 or earlier support, then it
+	 * very likely does not support these bits.
+	 */
+	if (cgd->inq_data.version <= SCSI_REV_2)
+		softc->quirks |= CH_Q_NO_DVCID;
+
 	bzero(&cpi, sizeof(cpi));
 	xpt_setup_ccb(&cpi.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
 	cpi.ccb_h.func_code = XPT_PATH_INQ;
@@ -1208,6 +1218,8 @@ chgetelemstatus(struct cam_periph *perip
 	caddr_t data = NULL;
 	size_t size, desclen;
 	int avail, i, error = 0;
+	int curdata, dvcid, sense_flags;
+	int try_no_dvcid = 0;
 	struct changer_element_status *user_data = NULL;
 	struct ch_softc *softc;
 	union ccb *ccb;
@@ -1239,14 +1251,31 @@ chgetelemstatus(struct cam_periph *perip
 	cam_periph_lock(periph);
 	ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL);
 
+	sense_flags = SF_RETRY_UA;
+	if (softc->quirks & CH_Q_NO_DVCID) {
+		dvcid = 0;
+		curdata = 0;
+	} else {
+		dvcid = 1;
+		curdata = 1;
+		/*
+		 * Don't print anything for an Illegal Request, because
+		 * these flags can cause some changers to complain.  We'll
+		 * retry without them if we get an error.
+		 */
+		sense_flags |= SF_QUIET_IR;
+	}
+
+retry_einval:
+
 	scsi_read_element_status(&ccb->csio,
 				 /* retries */ 1,
 				 /* cbfcnp */ chdone,
 				 /* tag_action */ MSG_SIMPLE_Q_TAG,
 				 /* voltag */ want_voltags,
 				 /* sea */ softc->sc_firsts[chet],
-				 /* dvcid */ 1,
-				 /* curdata */ 1,
+				 /* dvcid */ dvcid,
+				 /* curdata */ curdata,
 				 /* count */ 1,
 				 /* data_ptr */ data,
 				 /* dxfer_len */ 1024,
@@ -1254,9 +1283,38 @@ chgetelemstatus(struct cam_periph *perip
 				 /* timeout */ CH_TIMEOUT_READ_ELEMENT_STATUS);
 
 	error = cam_periph_runccb(ccb, cherror, /*cam_flags*/ CAM_RETRY_SELTO,
-				  /*sense_flags*/ SF_RETRY_UA,
+				  /*sense_flags*/ sense_flags,
 				  softc->device_stats);
 
+	/*
+	 * An Illegal Request sense key (only used if there is no asc/ascq)
+	 * or 0x24,0x00 for an ASC/ASCQ both map to EINVAL.  If dvcid or
+	 * curdata are set (we set both or neither), try turning them off
+	 * and see if the command is successful.
+	 */
+	if ((error == EINVAL)
+	 && (dvcid || curdata))  {
+		dvcid = 0;
+		curdata = 0;
+		error = 0;
+		/* At this point we want to report any Illegal Request */
+		sense_flags &= ~SF_QUIET_IR;
+		try_no_dvcid = 1;
+		goto retry_einval;
+	}
+
+	/*
+	 * In this case, we tried a read element status with dvcid and
+	 * curdata set, and it failed.  We retried without those bits, and
+	 * it succeeded.  Suggest to the user that he set a quirk, so we
+	 * don't go through the retry process the first time in the future.
+	 * This should only happen on changers that claim SCSI-3 or higher,
+	 * but don't support these bits.
+	 */
+	if ((try_no_dvcid != 0)
+	 && (error == 0))
+		softc->quirks |= CH_Q_NO_DVCID;
+
 	if (error)
 		goto done;
 	cam_periph_unlock(periph);
@@ -1284,8 +1342,8 @@ chgetelemstatus(struct cam_periph *perip
 				 /* voltag */ want_voltags,
 				 /* sea */ softc->sc_firsts[chet]
 				 + cesr->cesr_element_base,
-				 /* dvcid */ 1,
-				 /* curdata */ 1,
+				 /* dvcid */ dvcid,
+				 /* curdata */ curdata,
 				 /* count */ cesr->cesr_element_count,
 				 /* data_ptr */ data,
 				 /* dxfer_len */ size,



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201307121709.r6CH9oZr078053>