Date: Tue, 16 Apr 2013 10:40:46 +0200 From: Hans Petter Selasky <hps@bitfrost.no> To: Joshua Isom <jrisom@gmail.com> Cc: freebsd-hackers@FreeBSD.org Subject: Re: USB Printer quirks Message-ID: <516D0E8E.20807@bitfrost.no> In-Reply-To: <516C5FC0.9060507@gmail.com> References: <5169DFFB.4030101@gmail.com> <516BD94F.7030507@bitfrost.no> <516C5FC0.9060507@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 04/15/13 22:14, Joshua Isom wrote:
> On 4/15/2013 5:41 AM, Hans Petter Selasky wrote:
>> Hi,
>>
>> What does dmesg say about your printer.
>>
>> Is cups hooked up the correct /dev/uxxx device ?
>>
>> --HPS
>
> Here's what I got the last time I plugged it in.
>
> Apr 13 07:38:17 jri root: Unknown USB device: vendor 0x040a product
> 0x4043 bus uhub7
> Apr 13 07:38:17 jri kernel: ugen8.2: <Eastman Kodak Company> at usbus8
> Apr 13 07:38:17 jri kernel: ulpt0: <Print> on usbus8
> Apr 13 07:38:17 jri kernel: ulpt0: using bi-directional mode
> Apr 13 07:38:17 jri kernel: umass0: <MSCD> on usbus8
> Apr 13 07:38:17 jri kernel: umass0: SCSI over Bulk-Only; quirks = 0x0000
> Apr 13 07:38:17 jri kernel: umass0:14:0:-1: Attached to scbus14
> Apr 13 07:38:17 jri kernel: (da0:umass-sim0:0:0:0): got CAM status 0x50
> Apr 13 07:38:17 jri kernel: (da0:umass-sim0:0:0:0): fatal error, failed
> to attach to device
> Apr 13 07:38:17 jri kernel: (da0:umass-sim0:0:0:0): lost device - 0
> outstanding, 4 refs
> Apr 13 07:38:17 jri kernel: (da0:umass-sim0:0:0:0): removing device entry
>
> The umass is probably for the card reader, I've never tried it with
> FreeBSD. Cups would sometimes work, at most I'd be able to print one
> document/test and then it'd hang. I would actually have to power cycle
> the printer to try again. I think it was a problem reading from usb.
> What I'm really curious about is why it would work properly in a linux
> jail and not on FreeBSD. The closest hint I have is a kernel message
> "linux: pid 8781 (usb): ioctl fd=5, cmd=0x604 ('^F',4) is not implemented".
Hi,
What software are you using to print?
--HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?516D0E8E.20807>