Date: Thu, 28 Nov 2002 23:44:10 -0700 From: ertank@softhome.net To: current@freebsd.org Subject: usb modem problem Message-ID: <courier.3DE70CBA.00002566@softhome.net>
next in thread | raw e-mail | index | archive | help
This is a MIME-formatted message. If you see this text it means that your
mail software cannot handle MIME-formatted messages.
--=_0_5459_1038552250
Content-Type: text/plain; format=flowed; charset=iso-8859-1
Content-Transfer-Encoding: 7bit
Hello,
I am trying to use an usb modem under freebsd. It is detected during boot.
My system is current as of yesterday sources. Dmesg output is attached.
Modem is recognized as /dev/ugen0 and there is another node /dev/ugen0.1
I setup my ppp.conf file to use /dev/ugen0 when I try to use it the result
is below:
test# ppp
Working in interactive mode
Using interface: tun0
ppp ON test> term
deflink: Entering terminal mode on /dev/ugen0
Type '~?' for help
ugenpool: no edesc
ugenpool: no edesc
ppp ON test> q
test#
I do not know if I forget to do something.
Best regards,
--
Ertan Kucukoglu
ertank@softhome.net
--=_0_5459_1038552250
Content-Disposition: attachment; filename="dmesg.out"
Content-Type: text/plain; charset="iso-8859-1"; name="dmesg.out"
Content-Transfer-Encoding: 7bit
\M-kH\^Y\M^?\^W'\^_\M-~\^Wp\^_\M-~\^W\M-"\^_\M-~\^Wk \M-~\^W\M-,)\M^?\^W@\^B Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #5: Thu Nov 28 14:19:16 EET 2002
root@test.ozlerplastik.com:/usr/src/sys/i386/compile/OPTIMIZED_KERNEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0432000.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1594831500 Hz
CPU: Pentium 4 (1594.83-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf12 Stepping = 2
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 402653184 (384 MB)
avail memory = 386584576 (368 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
acpi0: <COMPAQ CPQ003E > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
Using $PIR table, 9 entries at 0xc00ebfd0
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
acpi_cpu0: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
fxp0: <Intel Pro/100 Ethernet> port 0x1000-0x103f mem 0xfc400000-0xfc400fff irq 5 at device 8.0 on pci2
fxp0: Ethernet address 00:08:02:16:d9:0e
inphy0: <i82562EM 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0x2460-0x246f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0x2440-0x245f irq 11 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ugen0: STMicroelectronics USB Communicator, rev 1.00/1.01, addr 2
pci0: <multimedia, audio> at device 31.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model 4D Mouse, device ID 6
ppc0 port 0x778-0x77d,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/13 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 10 packets/entry by default
DUMMYNET initialized (011031)
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
ad0: 19092MB <WDC WD200EB-11CPF0> [38792/16/63] at ata0-master UDMA100
acd0: CDROM <LTN486S> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
ugenpoll: no edesc
ugenpoll: no edesc
--=_0_5459_1038552250--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?courier.3DE70CBA.00002566>