Date: Thu, 11 Nov 1999 19:23:49 -0800 (PST) From: <keith@mail.telestream.com> To: Arthur <wyshbone@panix.com> Cc: questions@FreeBSD.ORG Subject: Re: FBSD 3.2 - Problems with zip drive Message-ID: <Pine.LNX.4.10.9911111923050.30967-100000@mail.telestream.com> In-Reply-To: <19991111211642.A264@wyshbone.panix.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Not to be to simple about this but, Have you created that mount directory for it to be able to mount on? Keith On Thu, 11 Nov 1999, Arthur wrote: > I'm a bit new to unix and freebsd, so if I get anyhting wrong feel > free to correct me. I'm running 3.2; I've got 2 parallel ports, one > of which has an external zip drive connected to it. I've been thru > The Complete FreeBSD, 3rd edition, the faq, the handbook and any > other documentation I could find. I've also searched deja.com but > I just can't seem to get this damn zip to work. > > In my kernal I have: > > controller scbus0 > device da0 > > controller ppbus0 > controller vp0 > device lpt0 at ppbus? > device lpt1 at ppbus? > > In /etc/fstab I have: > > /dev/da0s4 /zip msdos rw,noauto 1 1 > > The mount point /zip does exist and there is a disk in the drive. > > I realize this message may be a bit long, but I'm trying to make > sure I don't leave anything out. If anyone could help me get this > zip drive to work, or at least point me in the right direction, > I would be grateful. dmesg output follows. > > Thanks > dmesg output is: > > Copyright (c) 1992-1999 FreeBSD Inc. > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > FreeBSD 3.2-RELEASE #27: Thu Nov 11 20:56:52 EST 1999 > root@wyshbone.dialup.access.net:/usr/src/sys/compile/WYSHBONE > Timecounter "i8254" frequency 1193182 Hz > Timecounter "TSC" frequency 132955181 Hz > CPU: Pentium/P54C (132.96-MHz 586-class CPU) > Origin = "GenuineIntel" Id = 0x52c Stepping=12 > Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> > real memory = 100663296 (98304K bytes) > avail memory = 95293440 (93060K bytes) > Preloaded elf kernel "kernel" at 0xc026c000. > Probing for devices on PCI bus 0: > chip0: <Intel 82437FX PCI cache memory controller> rev 0x02 on pci0.0.0 > chip1: <Intel 82371FB PCI to ISA bridge> rev 0x02 on pci0.7.0 > ide_pci0: <Intel PIIX Bus-master IDE controller> rev 0x02 on pci0.7.1 > vga0: <S3 968 graphics accelerator> rev 0x00 int a irq 0 on pci0.9.0 > Probing for PnP devices: > CSN 1 Vendor ID: CTL0043 [0x43008c0e] Serial 0x0000da4b Comp ID: PNP0600 [0x0006d041] > Probing for devices on the ISA bus: > sc0 on isa > sc0: VGA color <16 virtual consoles, flags=0x0> > atkbdc0 at 0x60-0x6f on motherboard > atkbd0 irq 1 on isa > sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa > sio0: type 16550A > sio1 at 0x2f8-0x2ff irq 3 on isa > sio1: type 16550A > fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa > fdc0: FIFO enabled, 8 bytes threshold > fd0: 1.44MB 3.5in > wdc0 at 0x1f0-0x1f7 irq 14 on isa > wdc0: unit 0 (wd0): <WDC AC36400L> > wd0: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S > wdc1 at 0x170-0x177 irq 15 on isa > wdc1: unit 1 (atapi): <ATAPI CDROM/V2.30>, removable, dma, iordy > acd0: drive speed 4153KB/sec, 120KB cache > acd0: supported read types: CD-R, CD-RW, CD-DA > acd0: Audio: play, 255 volume levels > acd0: Mechanism: ejectable tray > acd0: Medium: no/blank disc inside, unlocked > ppc0 at 0x378 irq 7 flags 0x40 on isa > ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode > lpt0: <generic printer> on ppbus 0 > lpt0: Interrupt-driven port > ppi0: <generic parallel i/o> on ppbus 0 > lpt0: <generic printer> on ppbus 0 > lpt0: Interrupt-driven port > vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa > npx0 on motherboard > npx0: INT 16 interface > sb0 at 0x220 irq 5 drq 1 on isa > > NOTE! SB Pro support required with your soundcard! > snd0: <SoundBlaster 16 4.13> > Intel Pentium detected, installing workaround for F00F bug > changing root device to wd0s1a > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.10.9911111923050.30967-100000>