Date: Thu, 11 Nov 1999 19:31:07 -0800 (PST) From: <keith@mail.telestream.com> To: Arthur <wyshbone@panix.com> Cc: questions@FreeBSD.ORG Subject: Re: FBSD 3.2 - Problems with zip drive Message-ID: <Pine.LNX.4.10.9911111930180.31044-100000@mail.telestream.com> In-Reply-To: <Pine.LNX.4.10.9911111923050.30967-100000@mail.telestream.com>
next in thread | previous in thread | raw e-mail | index | archive | help
DOH!!!.... Sorry, didn't see below that it does exist. :-/ On Thu, 11 Nov 1999 keith@mail.telestream.com wrote: > Not to be to simple about this but, Have you created that mount directory > for it to be able to mount on? > > > Keith > > > > > On Thu, 11 Nov 1999, Arthur wrote: > > > I'm a bit new to unix and freebsd, so if I get anyhting wrong feel > > free to correct me. I'm running 3.2; I've got 2 parallel ports, one > > of which has an external zip drive connected to it. I've been thru > > The Complete FreeBSD, 3rd edition, the faq, the handbook and any > > other documentation I could find. I've also searched deja.com but > > I just can't seem to get this damn zip to work. > > > > In my kernal I have: > > > > controller scbus0 > > device da0 > > > > controller ppbus0 > > controller vp0 > > device lpt0 at ppbus? > > device lpt1 at ppbus? > > > > In /etc/fstab I have: > > > > /dev/da0s4 /zip msdos rw,noauto 1 1 > > > > The mount point /zip does exist and there is a disk in the drive. > > > > I realize this message may be a bit long, but I'm trying to make > > sure I don't leave anything out. If anyone could help me get this > > zip drive to work, or at least point me in the right direction, > > I would be grateful. dmesg output follows. > > > > Thanks > > dmesg output is: > > > > Copyright (c) 1992-1999 FreeBSD Inc. > > Copyright (c) 1982, 1986, 1989, 1991, 1993 > > The Regents of the University of California. All rights reserved. > > FreeBSD 3.2-RELEASE #27: Thu Nov 11 20:56:52 EST 1999 > > root@wyshbone.dialup.access.net:/usr/src/sys/compile/WYSHBONE > > Timecounter "i8254" frequency 1193182 Hz > > Timecounter "TSC" frequency 132955181 Hz > > CPU: Pentium/P54C (132.96-MHz 586-class CPU) > > Origin = "GenuineIntel" Id = 0x52c Stepping=12 > > Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> > > real memory = 100663296 (98304K bytes) > > avail memory = 95293440 (93060K bytes) > > Preloaded elf kernel "kernel" at 0xc026c000. > > Probing for devices on PCI bus 0: > > chip0: <Intel 82437FX PCI cache memory controller> rev 0x02 on pci0.0.0 > > chip1: <Intel 82371FB PCI to ISA bridge> rev 0x02 on pci0.7.0 > > ide_pci0: <Intel PIIX Bus-master IDE controller> rev 0x02 on pci0.7.1 > > vga0: <S3 968 graphics accelerator> rev 0x00 int a irq 0 on pci0.9.0 > > Probing for PnP devices: > > CSN 1 Vendor ID: CTL0043 [0x43008c0e] Serial 0x0000da4b Comp ID: PNP0600 [0x0006d041] > > Probing for devices on the ISA bus: > > sc0 on isa > > sc0: VGA color <16 virtual consoles, flags=0x0> > > atkbdc0 at 0x60-0x6f on motherboard > > atkbd0 irq 1 on isa > > sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa > > sio0: type 16550A > > sio1 at 0x2f8-0x2ff irq 3 on isa > > sio1: type 16550A > > fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa > > fdc0: FIFO enabled, 8 bytes threshold > > fd0: 1.44MB 3.5in > > wdc0 at 0x1f0-0x1f7 irq 14 on isa > > wdc0: unit 0 (wd0): <WDC AC36400L> > > wd0: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S > > wdc1 at 0x170-0x177 irq 15 on isa > > wdc1: unit 1 (atapi): <ATAPI CDROM/V2.30>, removable, dma, iordy > > acd0: drive speed 4153KB/sec, 120KB cache > > acd0: supported read types: CD-R, CD-RW, CD-DA > > acd0: Audio: play, 255 volume levels > > acd0: Mechanism: ejectable tray > > acd0: Medium: no/blank disc inside, unlocked > > ppc0 at 0x378 irq 7 flags 0x40 on isa > > ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode > > lpt0: <generic printer> on ppbus 0 > > lpt0: Interrupt-driven port > > ppi0: <generic parallel i/o> on ppbus 0 > > lpt0: <generic printer> on ppbus 0 > > lpt0: Interrupt-driven port > > vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa > > npx0 on motherboard > > npx0: INT 16 interface > > sb0 at 0x220 irq 5 drq 1 on isa > > > > NOTE! SB Pro support required with your soundcard! > > snd0: <SoundBlaster 16 4.13> > > Intel Pentium detected, installing workaround for F00F bug > > changing root device to wd0s1a > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.10.9911111930180.31044-100000>