Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 24 Feb 2000 22:29:26 -0600 (CST)
From:      Ishmael <ishmael@tranquility.net>
To:        questions@FreeBSD.ORG
Subject:   usb in 3.4-stable
Message-ID:  <Pine.BSF.4.21.0002242222490.363-100000@ppp-port1-18.tranquility.net>

next in thread | raw e-mail | index | archive | help
im trying to get usb support set up to use a new usb mouse.
however, i keep getting errors everytime i boot
here's my dmesg output:

Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 3.4-STABLE #1: Thu Feb 24 19:56:30 CST 2000
    ishmael@myname.my.domain:/usr/src/sys/compile/HP6370Z
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (350.80-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 100663296 (98304K bytes)
config> pnp 1 0 enable os irq0 3 drq0 0 port0 0x2f8
config> q
avail memory = 95260672 (93028K bytes)
Preloaded elf kernel "kernel" at 0xc0275000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc027509c.
DEVFS: ready for devices
Pentium Pro MTRR support enabled
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x02 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x02 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
uhci0: <Intel 82371AB/EB USB Host Controller> rev 0x01 int d irq 255 on pci0.7.2
create_intr: requested irq255 too high, limit is 15
usb0: could not map irq
intpm0: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
intpm0: I/O mapped 2180 ALLOCED IRQ 0 intr IRQ 9 enabled revision 0
intsmb0: <Intel PIIX4 SMBUS Interface>
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped 8000 
es1: <AudioPCI ES1371> rev 0x02 int a irq 9 on pci0.12.0
pcm1: using I/O space register mapping at 0xdcc0
es1371: codec vendor TRA revision 3
es1371: codec features Bass & Treble
es1371: stereo enhancement: no 3D stereo enhancement
Probing for devices on PCI bus 1:
vga0: <ATI model 4742 graphics accelerator> rev 0x5c int a irq 9 on pci1.0.0
Probing for PnP devices:
CSN 1 Vendor ID: USR3031 [0x31307256] Serial 0xe7c3febb Comp ID: PNPc10f [0x0fc1d041]
sio1: type 16550A
sio1 (siopnp <USR3031> sn 0xe7c3febb) at 0x2f8-0x2ff irq 3 on isa
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model IntelliMouse, device ID 3
ppc0 at 0x378 irq 7 flags 0x1 on isa
ppc0: Generic chipset (NIBBLE-only) in NIBBLE mode
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
wdc0 at 0x1f0-0x1f7 irq 14 flags 0xb0ffb0ff on isa
wdc0: unit 0 (wd0): <QUANTUM BIGFOOT TS9.6A>, LBA, DMA, 32-bit, multi-block-16
wd0: 9182MB (18805248 sectors), 1170 cyls, 255 heads, 63 S/T, 512 B/S
wdc0: unit 1 (atapi): <R/RW 4x4x24/ 1.04>, removable, accel, dma, iordy
acd0: drive speed 4134KB/sec, 2048KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA, packet track
acd0: supported write types: CD-R, CD-RW, test write
acd0: Audio: play, 2 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
wdc1 at 0x170-0x177 irq 15 flags 0xb0ffb0ff on isa
wdc1: unit 0 (wd1): <WDC AC21200H>, LBA, DMA, 32-bit, multi-block-16
wd1: 1222MB (2503872 sectors), 621 cyls, 64 heads, 63 S/T, 512 B/S
wdc1: unit 1 (atapi): <CRD-8322B/1.06>, removable, accel, dma, iordis
acd1: drive speed 5500KB/sec, 128KB cache
acd1: supported read types: CD-R, CD-RW, CD-DA, packet track
acd1: Audio: play, 255 volume levels
acd1: Mechanism: ejectable tray
acd1: Medium: no/blank disc inside, unlocked, lock protected
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
apm0 on isa
apm: found APM BIOS version 1.2
DEVFS: ready to run
IP Filter: initialized.  Default = pass all, Logging = enabled
IP Filter: v3.3.10

and here's my kernel config file:

machine		"i386"
ident		PAVILION
maxusers	10
config		kernel root on wd0s3a
cpu		"I686_CPU"
options		"CPU_SUSP_HLT"
options 	"NO_F00F_HACK"
options		PERFMON
options		"COMPAT_43"
options		SYSVSHM
options		SYSVSEM
options		SYSVMSG
options		"P1003_1B"
options		"_KPOSIX_PRIORITY_SCHEDULING"
options		"_KPOSIX_VERSION=199309L"
options		UCONSOLE
options		USER_LDT
options		INET
options 	IPFILTER
options 	IPFILTER_LOG
pseudo-device	loop
pseudo-device	tun	1
pseudo-device	bpfilter 1
options 	TCP_DROP_SYNFIN
options         "ICMP_BANDLIM"
options		FFS
options		FFS_ROOT
options		DEVFS
options		NFS_NOSERVER
options		SOFTUPDATES
pseudo-device	pty	16
pseudo-device	vn
controller	isa0
controller	pnp0
options		USERCONFIG
options		VISUAL_USERCONFIG
device		sio0	at isa? port "IO_COM1" tty irq 4
device		vga0	at isa? port ? conflicts
device		sc0	at isa? tty
device		npx0	at isa? port IO_NPX iosiz 0x0 flags 0x0 irq 13
controller	atkbdc0	at isa? port IO_KBD tty
device		atkbd0	at isa? tty irq 1
device		psm0	at isa? tty irq 12
controller	wdc0	at isa? port "IO_WD1" bio irq 14 flags 0xb0ffb0ff
disk		wd0	at wdc0 drive 0
device		acd0
controller	wdc1	at isa? port "IO_WD2" bio irq 15 flags 0xb0ffb0ff
disk		wd1	at wdc1 drive 0
options		ATAPI
options		ATAPI_STATIC
controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2
disk		fd0	at fdc0 drive 0
device		ppc0	at isa? port? flags 0x1 tty irq 7
controller	ppbus0
device		lpt0	at ppbus?
controller	pci0
device		pcm0
device		apm0	at isa? 
options		"VM86"
controller	smbus0
controller 	intpm0
device 		smb0	at smbus?
pseudo-device	streams	1
options		KTRACE
controller	uhci0
controller	usb0
device		ums0

any help would be appreciated.

Jeremy



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0002242222490.363-100000>