Date: Thu, 15 Mar 2001 14:24:28 -0500 (EST) From: Andrew Gallatin <gallatin@cs.duke.edu> To: lecn1306@ele.etsmtl.ca, :Kees Jan Koster <dutchman@tccn.cs.kun.nl>, craig-burgess@home.net Cc: freebsd-alpha@freebsd.org Subject: Re: Syslog reports weird things Message-ID: <15025.5868.345485.300691@grasshopper.cs.duke.edu> In-Reply-To: <3AB0E5E4.3951E240@ele.etsmtl.ca> References: <59063B5B4D98D311BC0D0001FA7E452205FD9A4F@l04.research.kpn.com> <15024.11923.918574.297867@grasshopper.cs.duke.edu> <3AB037F6.80405@videotron.ca> <15024.17137.342441.45530@grasshopper.cs.duke.edu> <3AB0E5E4.3951E240@ele.etsmtl.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
Normand Leclerc writes: > Right now, the best example I can give you to produce a console mess is to > use sysinstall or lynx. I've tried both of those things, and I also just did a buildworld with the output going to console as suggested by Kees Jan Koster & I never saw the problem. My setup is as follows: - API UP1000 (dmesg appended) - 4.3-BETA as of yesterday morning, GENERIC +sound drivers +ddb - console on (vga) graphics head - no console customizations via vidcontrol, kbdcontrol, etc. - no screen savers Are any of you who are seeing this customizing the console in any way? Colors, screensavers, fonts, etc? Or are you running a base 80x25 white-on-black console like me? How about kernel config options to syscons? I'd really like to fix this, but if I cannot reproduce it, fixing it is going to be next to impossible. Drew ------------------------------------------------------------------------------ Andrew Gallatin, Sr Systems Programmer http://www.cs.duke.edu/~gallatin Duke University Email: gallatin@cs.duke.edu Department of Computer Science Phone: (919) 660-6590 Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.3-BETA #0: Wed Mar 14 22:41:41 EST 2001 gallatin@thunder.cs.duke.edu:/.amd_mnt/muffin/export/ari_scratch2/gallatin/stable/sys/compile/THUNDER UP1000 API UP1000 598 MHz, 598MHz 8192 byte page size, 1 processor. CPU: major=11 minor=8 extensions=0x307<BWX,FIX,CIX,MVI,PRECISE> OSF PAL rev: 0x100010002013e real memory = 131481600 (128400K bytes) avail memory = 121061376 (118224K bytes) Preloaded elf kernel "kernel" at 0xfffffc0000810000. md0: Malloc disk pcib0: <AMD 751 PCI host bus adapter> on irongate0 pci0: <PCI bus> on pcib0 pcib1: <AMD-751 PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci2: <PCI bus> on pcib1 pci2: <VGA-compatible display device> at 5.0 isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 dc0: <Intel 21143 10/100BaseTX> port 0x10100-0x1017f mem 0x41353100-0x4135317f irq 10 at device 9.0 on pci0 dc0: interrupting at ISA irq 10 dc0: Ethernet address: 00:00:f8:07:b6:45 miibus0: <MII bus> on dc0 dcphy0: <Intel 21143 NWAY media interface> on miibus0 dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sym0: <875> port 0x10000-0x100ff mem 0x41351000-0x41351fff,0x41353000-0x413530ff irq 9 at device 10.0 on pci0 sym0: Symbios NVRAM, ID 7, Fast-20, SE, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: interrupting at ISA irq 9 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x10180-0x1019f mem 0x41100000-0x411fffff,0x41352000-0x41352fff irq 10 at device 11.0 on pci0 fxp0: using i/o space access fxp0: interrupting at ISA irq 10 fxp0: Ethernet address 00:a0:c9:8a:ac:aa atapci0: <AcerLabs Aladdin ATA33 controller> port 0x101b0-0x101bf,0x374-0x377,0x170-0x17f,0x3f4-0x3f7,0x1f0-0x1ff irq 15 at device 16.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 chip1: <AcerLabs M15x3 Power Management Unit> port 0x1040-0x105f,0x1000-0x103f at device 17.0 on pci0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: interrupting at ISA irq 6 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd0: interrupting at ISA irq 1 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: interrupting at ISA irq 12 psm0: model IntelliMouse, device ID 3 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0 at vga0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A sio0: interrupting at ISA irq 4 sio1: reserved for low-level i/o ppc0: <Parallel port> at port 0x3bc-0x3bf irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode plip0: cannot reserve interrupt, failed. lpt0: <Printer> on ppbus0 lpt0: Polled port ppi0: <Parallel I/O> on ppbus0 ppc0: interrupting at ISA irq 7 sbc0: <ESS ES1869> at port 0x220-0x22f,0x388-0x38b,0x330-0x331 irq 5 drq 1,0 on isa0 sbc0: interrupting at ISA irq 5 pcm0: <ESS 18xx DSP> on sbc0 Timecounter "alpha" frequency 598974745 Hz ad0: 6149MB <Maxtor 90651U2> [12495/16/63] at ata0-master UDMA33 acd0: CDROM <CD-ROM CDU4011> at ata1-master using PIO4 (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. Mounting root from ufs:/dev/ad0a da0 at sym0 bus 0 target 0 lun 0 da0: <SEAGATE ST39140W 1498> Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da0: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?15025.5868.345485.300691>