Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 23 Jan 2009 04:44:38 -0800 (PST)
From:      Upakul Barkakaty <upakul@gmail.com>
To:        freebsd-usb@freebsd.org
Subject:   Re: USB Devices not getting detected with USB card on PCI express.
Message-ID:  <21623803.post@talk.nabble.com>
In-Reply-To: <6f0bc3e80901110345x6dd40517l5793dc7e9720f47a@mail.gmail.com>
References:  <6f0bc3e80901110345x6dd40517l5793dc7e9720f47a@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help

Hello

I=E2=80=99m stuck in the very same situation in an exactly same scenario. I=
=E2=80=99m using
=E2=80=9CEmerson Networks mvme7100=E2=80=9D board that contains the Free-sc=
ale MPC8641d
processor. The setup is exactly same as mentioned i.e.

[PowerPC controller]<-->[PCI Express]<-->[PCIe-to-PCI bridge]<-->[PCI USB
Card]<-->USB Device
=20
And I=E2=80=99m getting SET_ADDR_FAILED error. I tried to debug this furthe=
r at my
end and found this was perhaps due to interrupts not coming from the USB
controller. And yes, I verified that it works as expected in X-86 setup.
Also, the same USB controller works fine if I have PCI instead of PCI
Express in my setup.=20

My QUESTION: IS this a known issue? Or any other developer facing the same
issue?

Any suggested work around for the same?

Cheers!!





Neha Oberoi wrote:
>=20
> Hi all,
>=20
> I am facing a strange problem with my freebsd stack. I am using freebsd
> version 6.0. The set up is as follows:
>=20
> [PowerPC controller]<-->[PCI Express]<-->[PCIe-to-PCI bridge]<-->[PCI USB
> Card]<-->USB Device
>=20
> When I plug in an USB device it gives a SET_ADDR_FAILED error, and
> disables
> the port.
>=20
> Now the strange thing is that the same setup with PCIe and USB is working
> all right on a x86 setup.
>=20
> I tried debugging but didnt get any obvious errors. Any pointers in this
> regard would be most welcome.
>=20
> Best regards,
> Nehaa
> _______________________________________________
> freebsd-usb@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-usb
> To unsubscribe, send any mail to "freebsd-usb-unsubscribe@freebsd.org"
>=20
>=20

--=20
View this message in context: http://www.nabble.com/USB-Devices-not-getting=
-detected-with-USB-card-on-PCI-express.-tp21398554p21623803.html
Sent from the freebsd-usb mailing list archive at Nabble.com.




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?21623803.post>