Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 10 Apr 1999 23:41:04 -0400
From:      "David E. Cross" <crossd@cs.rpi.edu>
To:        freebsd-hackers@freebsd.org
Subject:   increased crashing in NFS server
Message-ID:  <199904110341.XAA17071@cs.rpi.edu>

next in thread | raw e-mail | index | archive | help
I recently updated all of our FreeBSD3 clients to use NFSv3/UDP when
contacting our servers (FreeBSD3 of the same build tree).  We have
noticed an increase in crashing of our main home directory server 
(which is the only server really handling RW mounts, our other servers
are mostly RO, with some minor RW activity.)  The first crash was
obviously NFS.  I traced it to one of 2 possible crash points in the
kernel (sorry, no stack trace, we don't [yet] have a crashlogs enabled
for that machine.).

The panic was:
mbuf siz=33476
panic: Bad nfs svc reply

The second panic just happened, it claims to be softupdate related.  I
think it may have something to do with NFSv3 however since this machine
used to be very stable (ie, not 2 crashes in a week).

This panic was:
panic: softdep_write_inodeblock: indirect pointer #0 mismatch 0 != 102192
8
syncing disks... panic: softdep_lock: locking against myself


Here is some dmesg output for your amusement ;)
/kernel text=0x13557d data=0x17ba8+0x1fb64 syms=[0x4+0x1ee30+0x4+0x20f1b]
BIOS basemem (639K) != RTC basemem (640K), setting to BIOS value
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All rights reserved.
FreeBSD 3.1-STABLE #0: Sun Mar 21 02:23:19 EST 1999
    schimken@wobble.cs.rpi.edu:/usr/src/sys/compile/STAGGER
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium Pro (198.67-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x619  Stepping=9
  Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
real memory  = 100663296 (98304K bytes)
avail memory = 94965760 (92740K bytes)
Preloaded elf kernel "kernel" at 0xf02af000.
Probing for devices on PCI bus 0:
Correcting Natoma config for non-SMP
chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on pci0.0.0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x02 int a irq 11 on pci0.6.
0
fxp0: Ethernet address 00:a0:c9:55:a0:27
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.7.1
ahc0: <Adaptec aic7880 Ultra SCSI adapter> rev 0x00 int a irq 11 on pci0.9.0
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
vga0: <ATI model 4755 graphics accelerator> rev 0x9a on pci0.19.0
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A, console
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt-266023096: this driver is deprecated; use ppbus instead.
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 flags 0xa0ffa0ff on isa
wdc0: unit 0 (wd0): <ST39140A>, DMA, 32-bit, multi-block-16
wd0: 8693MB (17803440 sectors), 17662 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (wd1): <ST39140A>, DMA, 32-bit, multi-block-16
wd1: 8693MB (17803440 sectors), 17662 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 flags 0xa0ffa0ff on isa
wdc1: unit 0 (wd2): <IBM-DTTA-351680>, DMA, 32-bit, multi-block-16
wd2: 16124MB (33022080 sectors), 32760 cyls, 16 heads, 63 S/T, 512 B/S
wdc1: unit 1 (wd3): <IBM-DTTA-351680>, DMA, 32-bit, multi-block-16
wd3: 16124MB (33022080 sectors), 32760 cyls, 16 heads, 63 S/T, 512 B/S
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
IP packet filtering initialized, divert enabled, rule-based forwarding disabled,
 logging limited to 200 packets/entry
Waiting 5 seconds for SCSI devices to settle
changing roda3 at ahc0 bus 0 target 3 lun 0
da3: <SEAGATE ST15230N SUN4.2G 0702> Fixed Direct Access SCSI-2 device 
da3: 5.000MB/s transfers (5.000MHz, offset 15), Tagged Queueing Enabled
da3: 4095MB (8386733 512 byte sectors: 255H 63S/T 522C)
ot devicd0 at ahc0 bus 0 target 5 lun 0
cd0: <TOSHIBA CD-ROM XM-3701TA 3055> Removable CD-ROM SCSI-2 device 
cd0: 4.901MB/s transfers (4.901MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da2 at ahc0 bus 0 target 2 lun 0
da2: <SEAGATE ST15230N SUN4.2G 0702> Fixed Direct Access SCSI-2 device 
da2: 5.000MB/s transfers (5.000MHz, offset 15), Tagged Queueing Enabled
da2: 4095MB (8386733 512 byte sectors: 255H 63S/T 522C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST15230N SUN4.2G 0702> Fixed Direct Access SCSI-2 device 
da1: 5.000MB/s transfers (5.000MHz, offset 15), Tagged Queueing Enabled
da1: 4095MB (8386733 512 byte sectors: 255H 63S/T 522C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST15230N SUN4.2G 0702> Fixed Direct Access SCSI-2 device 
da0: 5.000MB/s transfers (5.000MHz, offset 15), Tagged Queueing Enabled
da0: 4095MB (8386733 512 byte sectors: 255H 63S/T 522C)

--
David Cross                                |   WinNT:Linux::Linux:FreeBSD
Systems Administrator/Research Programmer  |
Rensselaer Polytechnic Institute,          |   This space intentionally
Department of Computer Science             |        left unblank
I speak only for myself.                   |


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199904110341.XAA17071>