Date: Mon, 04 Jan 1999 11:01:58 -0800 From: Cy Schubert <cschuber@uumail.gov.bc.ca> To: Wes Peters <wes@softweyr.com>, ANDREAS.KLEMM.AK@bayer-ag.de, " - (052)stable(a)FreeBSD.ORG" <stable@FreeBSD.ORG> Subject: Re: 2.2.8 && CAM Message-ID: <199901041902.LAA02300@passer.osg.gov.bc.ca> In-Reply-To: Your message of "Mon, 04 Jan 1999 06:41:21 PST." <199901041442.GAA09287@cwsys.cwsent.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I've been working my 2.2.8R+CAM system here at work quite heavily. It appears that under heavy load, DEC TLZ06, EXABYTE EXB-85058SQANXR1 07T0, NEC CD-ROM DRIVE:464 1.05, and WDIGTL WDE9100-1807A4 1.30 on the SCSI bus attached to a 2940UW2 controller, with one tape drive, CDROM drive, and hard disk all heavily used, I get, Jan 4 09:21:19 passer /kernel: SEQADDR == 0x113 Jan 4 09:21:19 passer /kernel: SSTAT1 == 0x3 Jan 4 09:21:20 passer /kernel: (da0:ahc0:0:0:0 Jan 4 09:21:20 passer /kernel: ): SCB 0x5 - timed out in datain phase, SCSISIGI == 0x44 Jan 4 09:21:20 passer /kernel: SEQADDR == 0x113 Jan 4 09:21:20 passer /kernel: SSTAT1 == 0x3 Jan 4 09:21:20 passer /kernel: swap_pager: indefinite wait buffer: device: 1320 97, blkno: 54544, size: 4096 Jan 4 09:21:20 passer /kernel: (cd0:ahc0:0:5:0): SCB 0x2a - timed out in datain phase, SCSISIGI == 0x44 Jan 4 09:21:20 passer /kernel: SEQADDR == 0x113 Jan 4 09:21:20 passer /kernel: SSTAT1 == 0x3 Jan 4 09:21:20 passer /kernel: (cd0:ahc0:0:5:0): BDR message in message buffer Jan 4 09:21:20 passer /kernel: (cd0:ahc0:0:5:0): SCB 0x2a - timed out in status phase, SCSISIGI == 0xd4 Jan 4 09:21:20 passer /kernel: SEQADDR == 0x158 Jan 4 09:21:20 passer /kernel: SSTAT1 == 0x2 Jan 4 09:21:20 passer /kernel: (cd0:ahc0:0:5:0): no longer in timeout, status = 34b Jan 4 09:21:20 passer /kernel: ahc0: Issued Channel A Bus Reset. 65 SCBs aborte d Jan 4 09:21:20 passer /kernel: swap_pager: indefinite wait buffer: device: 1320 97, blkno: 54544, size: 4096 This is the first time I've seen the CAM patches do this on 2.2.6, 2.2.7, or 2.2.8. The errors are not fatal. Considering the above, would you still want me to make my 2.2.8R version of the patches available? Regards, Phone: (250)387-8437 Cy Schubert Fax: (250)387-5766 Open Systems Group Internet: Cy.Schubert@uumail.gov.bc.ca ITSD Cy.Schubert@gems8.gov.bc.ca Province of BC In message <199901041442.GAA09287@cwsys.cwsent.com>, Cy Schubert - ITSD Open Sy stems Group writes: > In message <368A55DD.A34F1A71@softweyr.com>, Wes Peters writes: > > Cy Schubert - ITSD Open Systems Group wrote: > > > > > > ANDREAS.KLEMM reported uttered: > > > > > > > > I know this has been discussed several times, CAM won*%t make it into 2 > .2 > > .x. > > > > > > > > Recommendations ? What would you do ? > > > > > > The CAM patches will work on 2.2.8. I've had them running on my 2.2.8 > > > desktop system at work for about a month. There is a catch however. > > > They do not apply to the 2.2.8 source cleanly, requiring some manual > > > editing of about 3 or 4 source files. IIRC, the files that had > > > problems were a couple of Makefiles, mt.c, and another file. Once > > > applied, they compiled cleanly and have run flawlessly for the past > > > month. Prior to that the CAM patches ran flawlessly on a 2.2.7 and > > > 2.2.6 system (same hardware). > > > > Can you provide 2.2.8 clean patches for Andreas? No use reinventing > > the wheel. > > > > -- > > Where am I, and what am I doing in this handbasket? > > I should be able to do this by the end of the week. > > > Regards, Phone: (250)387-8437 > Cy Schubert Fax: (250)387-5766 > Open Systems Group Internet: Cy.Schubert@uumail.gov.bc.ca > ITSD Cy.Schubert@gems8.gov.bc.ca > Province of BC > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199901041902.LAA02300>