Date: Thu, 18 Mar 2004 18:06:20 -0500 From: Don Bowman <don@sandvine.com> To: 'Sven Willenberger' <sven@dmv.com>, freebsd-current@freebsd.org Subject: RE: odd dmesg scsi error with aic7902 controller Message-ID: <FE045D4D9F7AED4CBFF1B3B813C85337045D8621@mail.sandvine.com>
next in thread | raw e-mail | index | archive | help
From: Sven Willenberger [mailto:sven@dmv.com] > Have just moved to supermicro 1U boxes using 80-pin SCA > drives (Seagate > ST336607LC) and U320 adaptec on-board controllers (aic7902) and the > error shown in the dmesg below crops up during bootup. > > The odd thing is that it only occurs if 2 or more drives are > connected; > if only 1 drive is physically attached, the boot up sequence > is smooth. > These boxes are not yet in production and I hesitate to do so if the > error message is an indication of future problems. This same message > does occur in FreeBSD 4.9-Release also. The following dmesg snippet > comes from a 5.2.1-Release system: Upgrade your firmware on the drive. This is available from seagate. You want version 007. I have a utility that can do this under bsd if you wish. --don (who spent half of last summer on this problem :)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?FE045D4D9F7AED4CBFF1B3B813C85337045D8621>