Date: Fri, 31 Jan 2003 09:25:36 +0100 From: "Christoph P. Kukulies" <kuku@physik.rwth-aachen.de> To: Gary Jennejohn <garyj@jennejohn.org> Cc: Christoph Kukulies <kuku@physik.rwth-aachen.de>, freebsd-isdn@freebsd.org Subject: Re: 5.0 and AVM A1 Message-ID: <20030131092536.B23154@gilberto.physik.rwth-aachen.de> In-Reply-To: <200301301803.h0UI3XZE020567@peedub.jennejohn.org>; from garyj@jennejohn.org on Thu, Jan 30, 2003 at 07:03:33PM %2B0100 References: <200301301627.RAA09323@accms33.physik.rwth-aachen.de> <200301301803.h0UI3XZE020567@peedub.jennejohn.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Jan 30, 2003 at 07:03:33PM +0100, Gary Jennejohn wrote:
> Christoph Kukulies writes:
> > I dared to install 5.0R today on of my gateway machines.
> > In .var.log.messages isdnd says it has no ISDN device found.
> >
> > I have device isic in my kernel config and options AVM_A1.
> >
> > No device seems to be detected in dmesg.
> >
>
> Do a ``boot -v'' and look at it. That might provide a clue.
OK, here goes but I see no trace of isic0:
BTW, where does the KERNEL.hints file have to go?, does it have to be
in /boot? Maybe that's the problem. I have this disk off-line at the moment
to be able to boot my old system (which I'm using for writing these lines now)
ALthough I did make install s, though I actually didn't check whether
the kernel hints file went there. Will double check.
--
Chris Christoph P. U. Kukulies kukulies@rwth-aachen.de
dmesg:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE #3: Thu Jan 30 17:54:53 GMT 2003
root@kuku.dialup.aachen.de:/usr/src/sys/i386/compile/MONK
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06d1000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06d10b4.
Calibrating clock(s) ... TSC clock: 499932048 Hz, i8254 clock: 1193155 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 499945231 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (499.95-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 268369920 (255 MB)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x006f8000 - 0x0ffe7fff, 261029888 bytes (63728 pages)
avail memory = 253390848 (241 MB)
bios32: Found BIOS32 Service Directory header at 0xc00facd0
bios32: Entry = 0xfb150 (c00fb150) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb180
pnpbios: Found PnP BIOS data at 0xc00fbd90
pnpbios: Entry = f0000:bdb8 Rev = 1.0
Other BIOS signatures found:
Initializing GEOMetry subsystem
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <COMPAQ CPQB0B9 > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003afc
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
Using $PIR table, 8 entries at 0xc00fdd30
PCI-Only Interrupts: 10 11 12
Location Bus Device Pin Link IRQs
slot 1 0 8 A 0x60 3 4 5 7 9 10 11 12 14 15
slot 1 0 8 B 0x61 3 4 5 7 9 10 11 12 14 15
slot 1 0 8 C 0x62 3 4 5 7 9 10 11 12 14 15
slot 1 0 8 D 0x63 3 4 5 7 9 10 11 12 14 15
slot 2 0 9 A 0x61 3 4 5 7 9 10 11 12 14 15
slot 2 0 9 B 0x62 3 4 5 7 9 10 11 12 14 15
slot 2 0 9 C 0x63 3 4 5 7 9 10 11 12 14 15
slot 2 0 9 D 0x60 3 4 5 7 9 10 11 12 14 15
slot 3 0 10 A 0x62 3 4 5 7 9 10 11 12 14 15
slot 3 0 10 B 0x63 3 4 5 7 9 10 11 12 14 15
slot 3 0 10 C 0x60 3 4 5 7 9 10 11 12 14 15
slot 3 0 10 D 0x61 3 4 5 7 9 10 11 12 14 15
slot 4 0 11 A 0x63 3 4 5 7 9 10 11 12 14 15
slot 4 0 11 B 0x60 3 4 5 7 9 10 11 12 14 15
slot 4 0 11 C 0x61 3 4 5 7 9 10 11 12 14 15
slot 4 0 11 D 0x62 3 4 5 7 9 10 11 12 14 15
slot 5 0 12 A 0x60 3 4 5 7 9 10 11 12 14 15
slot 5 0 12 B 0x61 3 4 5 7 9 10 11 12 14 15
slot 5 0 12 C 0x62 3 4 5 7 9 10 11 12 14 15
slot 5 0 12 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 7 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 7 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 7 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x63 3 4 5 7 9 10 11 12 14 15
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks BAD min = 1, max = 16777215, width = 16777215
ACPI timer looks BAD min = 2, max = 16777215, width = 16777214
ACPI timer looks BAD min = 1, max = 16777211, width = 16777211
ACPI timer looks BAD min = 2, max = 16777215, width = 16777214
ACPI timer looks BAD min = 1, max = 16777215, width = 16777215
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 16777213, width = 16777212
ACPI timer looks BAD min = 1, max = 6, width = 6
ACPI timer looks BAD min = 2, max = 16777197, width = 16777196
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4000-0x4041,0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.PCI0.ISA_.LNKA irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.0
\\_SB_.PCI0.ISA_.LNKB irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.1
\\_SB_.PCI0.ISA_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.2
\\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.3
\\_SB_.PCI0.ISA_.LNKB irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.0
\\_SB_.PCI0.ISA_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.1
\\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.2
\\_SB_.PCI0.ISA_.LNKA irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.3
\\_SB_.PCI0.ISA_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.0
\\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.1
\\_SB_.PCI0.ISA_.LNKA irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.2
\\_SB_.PCI0.ISA_.LNKB irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.3
\\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.0
\\_SB_.PCI0.ISA_.LNKA irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.1
\\_SB_.PCI0.ISA_.LNKB irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.2
\\_SB_.PCI0.ISA_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.3
\\_SB_.PCI0.ISA_.LNKA irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.0
\\_SB_.PCI0.ISA_.LNKB irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.1
\\_SB_.PCI0.ISA_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.2
\\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.3
\\_SB_.PCI0.ISA_.LNKA irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.0
\\_SB_.PCI0.ISA_.LNKB irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.1
\\_SB_.PCI0.ISA_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.2
\\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.3
\\_SB_.PCI0.ISA_.LNKA irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.0
\\_SB_.PCI0.ISA_.LNKB irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.1
\\_SB_.PCI0.ISA_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.2
\\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.3
---- before setting priority for links ------------
\\_SB_.PCI0.ISA_.LNKB:
interrupts: 3 4 5 6 7 10 11 12 14 15
penalty: 1770 1770 770 1770 1770 1470 1470 2470 10770 10770
references: 7
priority: 0
---- before fixup boot-disabled links -------------
\\_SB_.PCI0.ISA_.LNKB:
interrupts: 3 4 5 6 7 10 11 12 14 15
penalty: 1770 1770 770 1770 1770 1470 1470 2470 10770 10770
references: 7
priority: 24360
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.ISA_.LNKA irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.0
\\_SB_.PCI0.ISA_.LNKB irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.1
\\_SB_.PCI0.ISA_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.2
\\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.3
\\_SB_.PCI0.ISA_.LNKB irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.0
\\_SB_.PCI0.ISA_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.1
\\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.2
\\_SB_.PCI0.ISA_.LNKA irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.3
\\_SB_.PCI0.ISA_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.0
\\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.1
\\_SB_.PCI0.ISA_.LNKA irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.2
\\_SB_.PCI0.ISA_.LNKB irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.3
\\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.0
\\_SB_.PCI0.ISA_.LNKA irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.1
\\_SB_.PCI0.ISA_.LNKB irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.2
\\_SB_.PCI0.ISA_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.3
\\_SB_.PCI0.ISA_.LNKA irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.0
\\_SB_.PCI0.ISA_.LNKB irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.1
\\_SB_.PCI0.ISA_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.2
\\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.3
\\_SB_.PCI0.ISA_.LNKA irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.0
\\_SB_.PCI0.ISA_.LNKB irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.1
\\_SB_.PCI0.ISA_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.2
\\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.3
\\_SB_.PCI0.ISA_.LNKA irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.0
\\_SB_.PCI0.ISA_.LNKB irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.1
\\_SB_.PCI0.ISA_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.2
\\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e0000000, size 26, enabled
found-> vendor=0x8086, dev=0x7190, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7191, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x88 (34000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000f000, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000e000, size 5, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[90]: type 4, range 32, base 00005000, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 0000e400, size 6, enabled
found-> vendor=0x1274, dev=0x1371, revid=0x08
bus=0, slot=10, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns)
intpin=a, irq=10
powerspec 1 supports D0 D2 D3 current D1
map[10]: type 4, range 32, base 0000e800, size 7, enabled
map[14]: type 1, range 32, base e9000000, size 7, enabled
found-> vendor=0x10b7, dev=0x9055, revid=0x24
bus=0, slot=11, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000ec00, size 8, enabled
map[14]: type 1, range 32, base e9001000, size 8, enabled
found-> vendor=0x1000, dev=0x0001, revid=0x12
bus=0, slot=12, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=12
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0xe4000000-0xe5ffffff
pcib1: prefetched decode 0xe6000000-0xe7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base e4000000, size 24, enabled
map[14]: type 3, range 32, base e6000000, size 25, enabled
found-> vendor=0x10de, dev=0x002d, revid=0x11
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=255
powerspec 1 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008
ata1: mask=03 ostat0=7f ostat2=50
ata1-master: ATAPI 7f 7f
ata1-slave: ATAPI 14 eb
ata1: mask=03 stat0=7f stat1=00
ata1-master: ATA 7f 7f
ata1: devices=08
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pci0: <multimedia, audio> at device 10.0 (no driver attached)
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xe800-0xe87f mem 0xe9000000-0xe900007f irq 11 at device 11.0 on pci0
xl0: Ethernet address: 00:50:04:52:4f:73
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
sym0: <810a> port 0xec00-0xecff mem 0xe9001000-0xe90010ff irq 12 at device 12.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: open drain IRQ line driver
sym0: using LOAD/STORE-based firmware.
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: using extended I/O port range
ppc0: SPP
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xd0000-0xd3fff,0xc0000-0xcffff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03f3213e 0..1011=1012 cylinders, 0..33=34 heads, 1..62=62 sectors
2:03f8613f 0..1016=1017 cylinders, 0..97=98 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
i4bctl: ISDN system control port attached
i4btrc: 4 ISDN trace device(s) attached
i4bisppp: 4 ISDN SyncPPP device(s) attached
isp0: bpf attached
isp1: bpf attached
isp2: bpf attached
isp3: bpf attached
lo0: bpf attached
i4b: ISDN call control device attached
i4btel: 2 ISDN telephony interface device(s) attached
i4brbch: 4 raw B channel access device(s) attached
i4bipr: 4 IP over raw HDLC ISDN device(s) attached (VJ header compression)
ipr0: bpf attached
ipr1: bpf attached
ipr2: bpf attached
ipr3: bpf attached
ad0: success setting UDMA2 on Intel chip
GEOM: new disk ad0
ar: FreeBSD check1 failed
ad0: <IC35L060AVV207-0/V22OA63A> ATA-6 disk at ata0-master
ad0: 58644MB (120103200 sectors), 119150 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ata1-slave: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-slave: success setting PIO4 on generic chip
acd0: <ATAPI 48X CDROM/VER-3.30> CDROM drive at ata1 as slave
acd0: read 2062KB/s (32KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data disc
Waiting 15 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
GEOM: Configure ad0s1, start 32256 length 61492161024 end 61492193279
GEOM: Add ad0s1 hot[0] start 512 length 276 end 787
GEOM: Configure ad0s1a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s1b, start 268435456 length 515350528 end 783785983
GEOM: Configure ad0s1c, start 0 length 61492161024 end 61492161023
GEOM: Configure ad0s1d, start 783785984 length 268435456 end 1052221439
GEOM: Configure ad0s1e, start 1052221440 length 268435456 end 1320656895
GEOM: Configure ad0s1f, start 1320656896 length 60171504128 end 61492161023
(probe1:sym0:0:1:0): Retrying Command
(probe5:sym0:0:5:0): error 22
(probe5:sym0:0:5:0): Unretryable Error
(probe5:sym0:0:5:0): phase change 6-7 6@00802f8c resid=4.
pass0 at sym0 bus 0 target 0 lun 0
pass0: <QUANTUM FIREBALL1080S 1Q09> Fixed Direct Access SCSI-2 device
pass0: Serial Number 341521420895
pass0: 10.000MB/s transfers (10.000MHz, offset 8)
pass1 at sym0 bus 0 target 1 lun 0
pass1: <QUANTUM FIREBALL_TM3200S 300N> Fixed Direct Access SCSI-2 device
pass1: Serial Number 395630614900
pass1: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
pass2 at sym0 bus 0 target 5 lun 0
pass2: <YAMAHA CRW4260 1.0e> Removable CD-ROM SCSI-2 device
pass2: 3.300MB/s transfers
GEOM: new disk da0
GEOM: new disk da1
da0 at sym0 bus 0 target 0 lun 0
da0: <QUANTUM FIREBALL1080S 1Q09> Fixed Direct Access SCSI-2 device
da0: Serial Number 341521420895
da0: 10.000MB/s transfers (10.000MHz, offset 8)
da0: 1042MB (2134305 512 byte sectors: 255H 63S/T 132C)
(cd0:sym0:0:5:0): error 6
(cd0:sym0:0:5:0): Unretryable Error
cd0 at sym0 bus 0 target 5 lun 0
cd0: <YAMAHA CRW4260 1.0e> Removable CD-ROM SCSI-2 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
da1 at sym0 bus 0 target 1 lun 0
da1: <QUANTUM FIREBALL_TM3200S 300N> Fixed Direct Access SCSI-2 device
da1: Serial Number 395630614900
da1: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
da1: 3067MB (6281856 512 byte sectors: 255H 63S/T 391C)
GEOM: Configure da0s1, start 31744 length 2126848 end 2158591
GEOM: Configure da0s2, start 2158592 length 1090088960 end 1092247551
GEOM: Add da0 hot[0] start 512 length 276 end 787
GEOM: Configure da0c, start 0 length 1092764160 end 1092764159
GEOM: Configure da1s1, start 16384 length 3215966208 end 3215982591
GEOM: Add da1 hot[0] start 512 length 276 end 787
GEOM: Configure da1c, start 0 length 3216310272 end 3216310271
GEOM: Add da0s2 hot[0] start 512 length 276 end 787
GEOM: Configure da0s2a, start 0 length 41943040 end 41943039
GEOM: Configure da0s2b, start 41943040 length 273563648 end 315506687
GEOM: Configure da0s2c, start 0 length 1090088960 end 1090088959
GEOM: Configure da0s2e, start 315506688 length 20971520 end 336478207
GEOM: Configure da0s2f, start 336478208 length 753610752 end 1090088959
GEOM: Add da1s1 hot[0] start 512 length 276 end 787
GEOM: Configure da1s1c, start 0 length 3215966208 end 3215966207
GEOM: Configure da1s1e, start 0 length 3215966208 end 3215966207
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled
Linux ELF exec handler installed
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030131092536.B23154>