Date: Fri, 11 Aug 2000 14:20:00 -0500 From: Doug Poland <doug@polands.org> To: freebsd-mobile@freebsd.org Subject: Need help configuring PCMCIA modem Message-ID: <399451E0.32421453@polands.org>
next in thread | raw e-mail | index | archive | help
Hello,
I'm having problems configuring a Viking V.90/K56Flex
PCMCIA modem in a Compaq Armada E500 laptop with 4.0-RELEASE.
It seems that I have an interrupt conflict or something. I'm
unable to use cu or ppp's term to communicate with the modem.
For example, when I try cu as follows...
# cu -s 115200 -l /dev/cuaa2
Connected
and it just hangs there. I'll type ati4 <enter> and it doesn't
respond.
Here's all the configuration files that I've modified. Many thanks
for all your help.
*** kernel:
# PCCARD (PCMCIA) support
device card
device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000
device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? disable port IO_COM2 irq 3
device sio2 at isa? port IO_COM3 irq 7
# Parallel port
device ppc0 at isa? disable irq 7
*** /etc/pccard.conf
# Generally available IO ports
io 0x240-0x360
# Generally available IRQs (Built-in sound-card owners remove 5)
irq 3 10 11 13 15
# Available memory slots
memory 0xd4000 96k
# Viking V.90/K56Flex modem
card "Viking" "V.90 K56flex"
config 0x23 "sio2" ?
insert logger -t pccard:$device -s Viking 56K Modem inserted
remove logger -t pccard:$device -s Viking 56K Modem removed
*** /etc/rc.conf
pccard_mem="DEFAULT"
pccard_enable="YES"
*** When I run pccardc dumpcis, this is what I get...
# pccardc dumpcis
Code 85 not found
Code 85 not found
code Unknown ignored
Code 128 not found
Code 128 not found
code Unknown ignored
Configuration data for card in slot 1
Tuple #1, code = 0x0 (Null tuple), length = 12
000: 3c cb 9d 00 00 00 00 00 00 20 40 60
Tuple #2, code = 0x0 (Null tuple), length = 139
000: 55 44 16 00 01 08 00 30 70 50 49 2e c0 8b 2e c0
010: 50 49 86 29 00 18 00 00 0c 01 00 00 2e c0 8b 8b
020: 24 6e 01 00 00 00 00 b4 c6 02 00 00 00 56 00 00
030: 0d 43 70 72 67 74 28 29 31 39 2c 39 38 31 39 20
040: 49 74 6c 43 72 6f 61 69 6e 0a 49 74 6c 43 72 6f
050: 61 69 6e 49 74 6c 55 44 2c 50 45 32 30 28 75 6c
060: 20 37 29 48 ff ff 00 00 f2 00 b4 cd 0a 74 32 c3
070: 01 16 02 c0 c0 02 e4 c0 55 ec 60 46 b4 bb 00 01
080: cd 66 90 c2 00 20 e2 c3 0d dc 6a
Code 232 not found
Tuple #3, code = 0xe8 (Unknown), length = 0
2 slots found
*** And finally dmesg...
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
FreeBSD 4.0-RELEASE #8: Fri Aug 11 13:44:31 CDT 2000
djp@judah.newresources.com:/usr/src/sys/compile/JUDAH
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon (646.67-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory = 134152192 (131008K bytes)
avail memory = 126697472 (123728K bytes)
Preloaded elf kernel "kernel" at 0xc0314000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc031409c.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 11
pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> mem 0x41100000-0x41100fff
irq 11 at device 4.0 on pci0
pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> mem 0x41180000-0x41180fff
irq 11 at device 4.1 on pci0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x3420-0x342f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0x4000-0x400f at
device 7.3 on pci0
chip2: <ESS Technology Maestro 2E Audio controller> port 0x3000-0x30ff
irq 11 at device 8.0 on pci0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> port 0x3440-0x347f mem
0x41200000-0x4121ffff,0x41280000-0x41280f
fxp0: Ethernet address 00:b4:c0:91:00:a6, 10Mbps
pci0: <unknown card> (vendor=0x11c1, dev=0x0445) at 9.1 irq 11
vt0 on isa0
vt0: generic, 80 col, color, 8 scr, unknown kbd, [R3.20-b24]
vt0: driver is using old-style compatability shims
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio2: configured irq 7 not in bitmap of probed irqs 0x8
sio2 at port 0x3e8-0x3ef irq 7 on isa0
sio2: type 16550A
pca0 at port 0x40 on isa0
unknown0: <PNP0c04> at port 0xf0-0xff irq 13 on isa0
unknown1: <PNP0c01> at iomem
0-0x9ffff,0xf0000-0xfffff,0x100000-0x7ffffff on isa0
unknown2: <PNP0a03> at port 0xcf8-0xcff on isa0
unknown: <PNP0000> can't assign resources
unknown3: <PNP0200> at port 0-0xf,0x80-0x8f,0xc0-0xdf drq 4 on isa0
unknown4: <PNP0100> at port 0x40-0x43 irq 0 on isa0
unknown: <PNP0800> can't assign resources
unknown5: <PNP0b00> at port 0x70-0x71,0x72,0x73 irq 8 on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0401> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <SMCf010> can't assign resources
unknown6: <PNP0e03> at port 0x3e1-0x3e2 on isa0
unknown: <PNP0c02> can't assign resources
ncp_load: [210-213]
ad0: 11513MB <HITACHI_DK23AA-12> [23392/16/63] at ata0-master using
UDMA33
acd0: DVD-ROM <Compaq DVD-ROM SD-C2402> at ata0-slave using WDMA2
Mounting root from ufs:/dev/ad0s3a
pccard: card inserted, slot 1
fxp0: warning: unsupported PHY, type = 0, addr = 0
fxp0: warning: unsupported PHY, type = 0, addr = 0
fxp0: warning: unsupported PHY, type = 0, addr = 0
fire_saver: the console does not support M_VGA_CG320
module_register_init: MOD_LOAD (fire_saver, c0b24564, 0) error 19
--
Regards,
Doug
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?399451E0.32421453>