Date: Sat, 04 Jul 2009 14:20:56 +0300 From: Alexander Motin <mav@FreeBSD.org> To: Mike Tancsa <mike@sentex.net> Cc: FreeBSD-Current <freebsd-current@FreeBSD.org>, scottl@FreeBSD.org Subject: Re: RFC: ATA to CAM integration patch Message-ID: <4A4F3B18.5010905@FreeBSD.org> In-Reply-To: <200907021859.n62IxghN009931@lava.sentex.ca> References: <4A4517BE.9040504@FreeBSD.org> <200906272303.n5RN3rTi070177@lava.sentex.ca> <4A471F44.7010108@FreeBSD.org> <200907021859.n62IxghN009931@lava.sentex.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
Mike Tancsa wrote: > On the ich10 board, its trying to boot up now, but I am getting > > uhub8: 4 ports with 4 removable, self powered > (probe2:ahcich2:0:0:0): SIGNATURE: eb14 > run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config > ahcich2: Timeout on slot 4 > run_interrupt_driven_hooks: still waiting after 120 seconds for xpt_config > ahcich2: Timeout on slot 5 > run_interrupt_driven_hooks: still waiting after 180 seconds for xpt_config > ahcich2: Timeout on slot 6 > run_interrupt_driven_hooks: still waiting after 240 seconds for xpt_config > ahcich2: Timeout on slot 7 > run_interrupt_driven_hooks: still waiting after 300 seconds for xpt_config > ahcich2: Timeout on slot 8 > ada0 at ahcich1 bus 0 target 0 lun 0 > ada0: <ST3500410AS CC34> ATA/ATAPI-8 SATA 2.x device > ada0: 300.000MB/s transfers > ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) > ada0: Native Command Queueing Enabled I've found how to make this DVD work. It refused to process PACKET command until I have explicitly set it's PATA-legacy transfer mode to the maximal supported. %camcontrol devlist <ST3500410AS CC34> at scbus0 target 0 lun 0 (pass0,ada0) <MATSHITA DVD-ROM UJDA780 1.50> at scbus2 target 0 lun 0 (cd0,pass1) Patch committed to P4. -- Alexander Motin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4A4F3B18.5010905>