Date: Thu, 20 Sep 2001 19:16:55 +0200 From: Wilko Bulte <wkb@freebie.xs4all.nl> To: Matthew Jacob <mjacob@feral.com> Cc: Jos Backus <josb@cncdsl.com>, scsi@FreeBSD.ORG Subject: Re: sa problems Message-ID: <20010920191655.A6247@freebie.xs4all.nl> In-Reply-To: <Pine.BSF.4.21.0109200842010.33328-100000@beppo>; from mjacob@feral.com on Thu, Sep 20, 2001 at 08:42:21AM -0700 References: <20010919235751.A605@lizzy.bugworks.com> <Pine.BSF.4.21.0109200842010.33328-100000@beppo>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Sep 20, 2001 at 08:42:21AM -0700, Matthew Jacob wrote: Like it says: DDS == DAT Drives Suck > media error followed by not ready. the blinking yellow is the giveaway. > > Bad tape, and you now should clean the heads. > > On Wed, 19 Sep 2001, Jos Backus wrote: > > > Is anybody else having problems with tape drives with tonight's -current? > > While trying to create a backup on my > > > > sa0: <HP C1533A A708> Removable Sequential Access SCSI-2 device > > > > I am seeing > > > > mt: /dev/nsa0: Device not configured > > > > in response to > > > > mt rew > > > > CAMDEBUG output: > > > > Sep 19 23:53:34 lizzy /boot/kernel/kernel: (sa0:ahc0:0:3:0): saopen(0): dev=0x0 softc=0x0 > > Sep 19 23:53:34 lizzy /boot/kernel/kernel: (sa0:ahc0:0:3:0): sastart(sa0:ahc0:0:3:0): sastart(sa0:ahc0:0:3:0): CDB[0]=0x0 Key 0x2 ASC/ASCQ 0x4/0x2 CAM STATUS 0xc flags 0x0 resid 0 dxfer_len 0 > > Sep 19 23:53:35 lizzy /boot/kernel/kernel: (sa0:ahc0:0:3:0): CDB[0]=0x1b Key 0x3 ASC/ASCQ 0x3b/0x0 CAM STATUS 0xc flags 0x0 resid 0 dxfer_len 0 > > Sep 19 23:53:36 lizzy /boot/kernel/kernel: (sa0:ahc0:0:3:0): CDB[0]=0x1b Key 0x3 ASC/ASCQ 0x3b/0x0 CAM STATUS 0xc flags 0x0 resid 0 dxfer_len 0 > > Sep 19 23:53:37 lizzy /boot/kernel/kernel: (sa0:ahc0:0:3:0): CDB[0]=0x1b Key 0x3 ASC/ASCQ 0x3b/0x0 CAM STATUS 0xc flags 0x0 resid 0 dxfer_len 0 > > Sep 19 23:53:37 lizzy /boot/kernel/kernel: (sa0:ahc0:0:3:0): CDB[0]=0x1 Key 0x2 ASC/ASCQ 0x4/0x2 CAM STATUS 0xc flags 0x0 resid 0 dxfer_len 0 > > Sep 19 23:53:38 lizzy /boot/kernel/kernel: (sa0:ahc0:0:3:0): CDB[0]=0x1 Key 0x2 ASC/ASCQ 0x4/0x2 CAM STATUS 0xc flags 0x0 resid 0 dxfer_len 0 > > Sep 19 23:53:38 lizzy /boot/kernel/kernel: (sa0:ahc0:0:3:0): sastart > > > > Fwiw, the right light on the drive is blinking yellow after this, and I have > > to power off the system to make it stop. I tried camcontrol reset without > > success. -- | / o / /_ _ email: wilko@FreeBSD.org |/|/ / / /( (_) Bulte Arnhem, The Netherlands To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010920191655.A6247>