Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 20 Jun 2013 07:58:34 -1000 (HST)
From:      Jeff Roberson <jroberson@jroberson.net>
To:        Zbyszek Bodek <zbb@semihalf.com>
Cc:        freebsd-arm@FreeBSD.org, freebsd-current@freebsd.org, jeff@FreeBSD.org
Subject:   Re: Kernel build fails on ARM: Cannot fork: Cannot allocate memory
Message-ID:  <alpine.BSF.2.00.1306200755210.2005@desktop>
In-Reply-To: <51C1F53B.2080502@semihalf.com>
References:  <51C1F53B.2080502@semihalf.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 19 Jun 2013, Zbyszek Bodek wrote:

> Hello,
>
> I've been trying to compile the kernel on my ARMv7 platform using the
> sources from the current FreeBSD HEAD.
>
> make buildkernel <.....> -j5
>
> 1/2 builds fails in the way described below:
> --------------------------------------------------------------------------
> ing-include-dirs -fdiagnostics-show-option   -nostdinc  -I.
> -I/root/src/freebsd-arm-superpages/sys
> -I/root/src/freebsd-arm-superpages/sys/contrib/altq
> -I/root/src/freebsd-arm-superpages/sys/contrib/libfdt -D_KERNEL
> -DHAVE_KERNEL_OPTION_HEADERS -include opt_global.h -fno-common
> -finline-limit=8000 --param inline-unit-growth=100 --param
> large-function-growth=1000  -mno-thumb-interwork -ffreestanding -Werror
> /root/src/freebsd-arm-superpages/sys/ufs/ffs/ffs_snapshot.c
> Cannot fork: Cannot allocate memory
> *** [ffs_snapshot.o] Error code 2
> 1 error
> *** [buildkernel] Error code 2
> 1 error
> *** [buildkernel] Error code 2
> 1 error
> 5487.888u 481.569s 7:35.65 1310.0%      1443+167k 1741+5388io 221pf+0w
> --------------------------------------------------------------------------
>
> The warning from std err is:
> --------------------------------------------------------------------------
> vm_thread_new: kstack allocation failed
> vm_thread_new: kstack allocation failed
> --------------------------------------------------------------------------
>
> I was trying to find out which commit is causing this (because I was
> previously working on some older revision) and using bisect I got to:
>
> --------------------------------------------------------------------------
> Author: jeff <jeff@FreeBSD.org>
> Date:   Tue Jun 18 04:50:20 2013 +0000
>
>    Refine UMA bucket allocation to reduce space consumption and improve
>    performance.
>
>     - Always free to the alloc bucket if there is space.  This gives LIFO
>       allocation order to improve hot-cache performance.  This also allows
>       for zones with a single bucket per-cpu rather than a pair if the
> entire
>       working set fits in one bucket.
>     - Enable per-cpu caches of buckets.  To prevent recursive bucket
>       allocation one bucket zone still has per-cpu caches disabled.
>     - Pick the initial bucket size based on a table driven maximum size
>       per-bucket rather than the number of items per-page.  This gives
>       more sane initial sizes.
>     - Only grow the bucket size when we face contention on the zone
> lock, this
>       causes bucket sizes to grow more slowly.
>     - Adjust the number of items per-bucket to account for the header
> space.
>       This packs the buckets more efficiently per-page while making them
>       not quite powers of two.
>     - Eliminate the per-zone free bucket list.  Always return buckets back
>       to the bucket zone.  This ensures that as zones grow into larger
>       bucket sizes they eventually discard the smaller sizes.  It persists
>       fewer buckets in the system.  The locking is slightly trickier.
>     - Only switch buckets in zalloc, not zfree, this eliminates
> pathological
>       cases where we ping-pong between two buckets.
>     - Ensure that the thread that fills a new bucket gets to allocate from
>       it to give a better upper bound on allocation time.
>
>    Sponsored by:	EMC / Isilon Storage Division
> --------------------------------------------------------------------------
>
> I checked this several times and this commits seems to be causing this.

Can you tell me how many cores and how much memory you have?  And paste 
the output of vmstat -z when you see this error.

You can try changing bucket_select() at line 339 in uma_core.c to read:

static int
bucket_select(int size)
{
 	return (MAX(PAGE_SIZE / size, 1));
}

This will approximate the old bucket sizing behavior.

Thanks,
Jeff

>
> Does anyone observe similar behavior or have a solution?
>
> Best regards
> Zbyszek Bodek
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.BSF.2.00.1306200755210.2005>