Date: Fri, 17 Nov 2000 16:09:27 +0100 From: "Claes Leufven" <claes@griffel.se> To: <freebsd-mobile@freebsd.org> Subject: APM problems with 5.0-20001112-CURRENT Message-ID: <003901c050a8$61540d00$2a67a8c0@chewie.outherlimits.org>
next in thread | raw e-mail | index | archive | help
Hi
I have a Compaq Armada E500 and the apm support doesnt work. It seems that
the kernel doesnt find the apm controller just that it is on the pci bus. I
am using freebsd 5.0-20001112-current and have tried with both the generic
kernel and my custom kernel. in the kernel configuration I have just "device
apm" any one got any idea whats wrong? My dmesg output is in down under
here...
Regards
Claes Leufven
--dmesg output
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-20001112-CURRENT #4: Wed Nov 15 22:05:44 CET 2000
root@chewie.outherlimits.org:/usr/src/sys/compile/chewie
Calibrating clock(s) ... TSC clock: 497464932 Hz, i8254 clock: 1193258 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 497435562 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (497.44-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR,SSE>
real memory = 67043328 (65472K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00312000 - 0x03fe7fff, 63791104 bytes (15574 pages)
avail memory = 62279680 (60820K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fa000
bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x478
pnpbios: Found PnP BIOS data at 0xc00f5100
pnpbios: Entry = f0000:512e Rev = 1.0
pnpbios: Event flag at f5126
pnpbios: OEM ID 51b1110e
Other BIOS signatures found:
Preloaded elf kernel "kernel" at 0xc02f9000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc02f90a8.
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 00 02 00 01 00 01 00 00 00 00 22 00
00 01 7f 00 00 01 0b 01 00 01 21 01 00 01 2a 01
00 01 00 01 01 01 10 01 11 01 12 01 03 01 13 01
14 01 15 01 05 01 16 01 17 01 18 01 07 01 19 01
VESA: 40 mode(s) found
VESA: v2.0, 8128k memory, flags:0x0, mode table:0xc029e3a2 (1000022)
VESA: ATI MACH64
VESA: ATI Technologies Inc. MACH64RM 01.00
Using $PIR table, 268435454 entries at 0xc00f0970
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on
motherboard
pci0: physical bus=0
found-> vendor=0x8086, dev=0x7190, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 3, range 32, base 50000000, size 26, enabled
found-> vendor=0x8086, dev=0x7191, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x104c, dev=0xac1c, revid=0x01
bus=0, slot=4, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=2 secondarybus=2
intpin=a, irq=11
map[10]: type 1, range 32, base 41100000, size 12, enabled
found-> vendor=0x104c, dev=0xac1c, revid=0x01
bus=0, slot=4, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=3 secondarybus=3
intpin=a, irq=11
map[10]: type 1, range 32, base 41180000, size 12, enabled
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=7, func=0
class=06-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 4, range 32, base 00003420, size 4, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=11
map[20]: type 4, range 32, base 00003400, size 5, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x03
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[90]: type 4, range 32, base 00004000, size 4, enabled
found-> vendor=0x125d, dev=0x1978, revid=0x10
bus=0, slot=8, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 4, range 32, base 00003000, size 8, enabled
found-> vendor=0x8086, dev=0x1229, revid=0x09
bus=0, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 41280000, size 12, enabled
map[14]: type 4, range 32, base 00003440, size 6, enabled
map[18]: type 1, range 32, base 41200000, size 17, enabled
found-> vendor=0x11c1, dev=0x0445, revid=0x00
bus=0, slot=9, func=1
class=07-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 4, range 32, base 00003430, size 3, enabled
map[14]: type 1, range 32, base 41300000, size 12, enabled
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: physical bus=1
found-> vendor=0x1002, dev=0x4c4d, revid=0x64
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 40000000, size 24, enabled
map[14]: type 4, range 32, base 00002000, size 8, enabled
map[18]: type 1, range 32, base 41000000, size 12, enabled
pci1: <PCI bus> on pcib1
pci1: <ATI Mobility-1 graphics accelerator> (vendor=0x1002, dev=0x4c4d) at
0.0 irq 11
pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> mem 0x41100000-0x41100fff irq 11
at device 4.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa
irq]
pcic-pci0: Legacy address set to 0x3e0
PCI Config space:
00: ac1c104c 02100007 06070001 00824208
10: 41100000 020000a0 00020200 00000000
20: 00000000 00000000 00000000 00000000
30: 00000000 00000000 00000000 03c0010b
40: b1210e11 000003e1 00000000 00000000
50: 00000000 00000000 00000000 00000000
60: 00000000 00000000 00000000 00000000
70: 00000000 00000000 00000000 00000000
80: 28049060 00000000 00000000 01001c72
90: 60640280 00000000 00000000 00000000
Cardbus Socket registers:
00: 00000000: 00000000: 30000306: 00000000:
10: 00000000: 00000000: 00000000: 00000000:
ExCa registers:
00: 84 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> mem 0x41180000-0x41180fff irq 11
at device 4.1 on pci0
pcic-pci1: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa
irq]
PCI Config space:
00: ac1c104c 02100007 06070001 00824208
10: 41180000 020000a0 00030300 00000000
20: 00000000 00000000 00000000 00000000
30: 00000000 00000000 00000000 03c0010b
40: b1210e11 000003e1 00000000 00000000
50: 00000000 00000000 00000000 00000000
60: 00000000 00000000 00000000 00000000
70: 00000000 00000000 00000000 00000000
80: 28449060 00000000 00000000 01001c72
90: 60640280 00000000 00000000 00000000
Cardbus Socket registers:
00: 00000000: 00000000: 30000306: 00000000:
10: 00000000: 00000000: 00000000: 00000000:
ExCa registers:
00: 84 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x3420-0x342f at device 7.1 on
pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x3420
ata0: mask=03 status0=50 status1=00
ata0: mask=03 status0=50 status1=00
ata0: devices = 0x9
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x3428
ata1: mask=00 status0=ff status1=ff
ata1: probe allocation failed
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x3400-0x341f irq 11
at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <Intel 82371AB Power management controller> (vendor=0x8086,
dev=0x7113) at 7.3
pci0: <ESS Technology Maestro 2E Audio controller> (vendor=0x125d,
dev=0x1978) at 8.0 irq 11
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x3440-0x347f mem
0x41200000-0x4121ffff,0x41280000-0x41280fff irq 11 at device 9.0 on pci0
fxp0: Ethernet address 00:d0:59:06:d5:99
bpf: fxp0 attached
pci0: <unknown card> (vendor=0x11c1, dev=0x0445) at 9.1 irq 11
ata-: ata0 already exists, using ata2 instead
ata-: ata1 already exists, using ata3 instead
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 16 devices, largest 250 bytes
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
PNP0c04: adding irq mask 0x2000
PNP0c04: end config
pnpbios: handle 1 device ID PNP0c04 (040cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0x3ffffff, size=0x3f00000
PNP0c01: end config
pnpbios: handle 2 device ID PNP0c01 (010cd041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: end config
pnpbios: handle 3 device ID PNP0a03 (030ad041)
PNP0000: adding io range 0x20-0x21, size=0x2, align=0
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0
PNP0000: adding irq mask 0x4
PNP0000: end config
pnpbios: handle 4 device ID PNP0000 (0000d041)
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x80-0x8f, size=0x10, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
PNP0200: adding dma mask 0x10
PNP0200: end config
pnpbios: handle 5 device ID PNP0200 (0002d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
PNP0100: adding irq mask 0x1
PNP0100: end config
pnpbios: handle 6 device ID PNP0100 (0001d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
PNP0800: end config
pnpbios: handle 7 device ID PNP0800 (0008d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
PNP0b00: adding io range 0x72-0x72, size=0x1, align=0
PNP0b00: adding io range 0x73-0x73, size=0x1, align=0
PNP0b00: adding irq mask 0x100
PNP0b00: end config
pnpbios: handle 8 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
PNP0303: adding irq mask 0x2
PNP0303: end config
pnpbios: handle 9 device ID PNP0303 (0303d041)
PNP0f13: adding irq mask 0x1000
PNP0f13: end config
pnpbios: handle 10 device ID PNP0f13 (130fd041)
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0
PNP0700: end config
pnpbios: handle 11 device ID PNP0700 (0007d041)
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x8
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0
PNP0401: end config
pnpbios: handle 12 device ID PNP0401 (0104d041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
PNP0501: adding irq mask 0x10
PNP0501: end config
pnpbios: handle 13 device ID PNP0501 (0105d041)
SMCf010: adding io range 0x3e8-0x3ef, size=0x8, align=0
SMCf010: adding io range 0x100-0x107, size=0x8, align=0x10
SMCf010: adding irq mask 0x8
SMCf010: adding dma mask 0x20
SMCf010: end config
pnpbios: handle 14 device ID SMCf010 (10f0a34d)
PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0
PNP0e03: end config
pnpbios: handle 15 device ID PNP0e03 (030ed041)
PNP0c02: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000
PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0
PNP0c02: adding io range 0x22-0x3f, size=0x1e, align=0
PNP0c02: adding io range 0x44-0x5f, size=0x1c, align=0
PNP0c02: adding io range 0x62-0x63, size=0x2, align=0
PNP0c02: adding io range 0x65-0x6f, size=0xb, align=0
PNP0c02: adding io range 0x74-0x74, size=0x1, align=0
PNP0c02: adding io range 0x75-0x75, size=0x1, align=0
PNP0c02: adding io range 0x76-0x76, size=0x1, align=0
PNP0c02: adding io range 0x77-0x77, size=0x1, align=0
PNP0c02: adding io range 0x90-0x91, size=0x2, align=0
PNP0c02: adding io range 0x92-0x92, size=0x1, align=0
PNP0c02: adding io range 0x93-0x9f, size=0xd, align=0
PNP0c02: adding io range 0xa2-0xbf, size=0x1e, align=0
PNP0c02: adding io range 0xe0-0xe5, size=0x6, align=0
PNP0c02: adding io range 0xe7-0xe7, size=0x1, align=0
PNP0c02: adding io range 0xec-0xef, size=0x4, align=0
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0c02: adding io range 0x5000-0x5063, size=0x64, align=0
PNP0c02: adding io range 0x4000-0x400f, size=0x10, align=0
PNP0c02: adding io range 0x6004-0x6005, size=0x2, align=0
PNP0c02: adding io range 0x800-0x87f, size=0x80, align=0
PNP0c02: end config
pnpbios: handle 16 device ID PNP0c02 (020cd041)
sc-: sc0 already exists, using sc1 instead
vga-: vga0 already exists, using vga1 instead
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000
ata3: mask=00 status0=ff status1=ff
ata3: probe allocation failed
ata3 failed to probe at port 0x170-0x177,0x376 irq 15 on isa0
adv0 failed to probe on isa0
bt0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: status 10 00 64
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this
adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83
b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f
b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83
b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f
b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vt0 failed to probe on isa0
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
stat is 0
stat is 0
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
vpo0: can't connect to the drive
imm0: (disconnect) s1=0x38 s2=0x38, s3=0x38
imm0: (connect) s1=0x38 s2=0x38, s3=0x38
imm0: can't connect to the drive
cs0 failed to probe at port 0x300 on isa0
ed0 failed to probe at port 0x280 iomem 0xd8000 irq 10 on isa0
fe0 failed to probe at port 0x300 on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic1: not probed (disabled)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x41 0x41 0x41 0x41
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0 failed to probe at port 0x300 irq 10 on isa0
sc1: no video adapter is found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0401> can't assign resources
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <SMCf010> failed to probe at port 0x3e8-0x3ef,0x100-0x107 irq 3 drq
5 on isa0
unknown: <PNP0e03> failed to probe at port 0x3e1-0x3e2 on isa0
BIOS Geometries:
0:03fdef3f 0..1021=1022 cylinders, 0..239=240 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: vlan0 attached
bpf: vlan1 attached
bpf: vlan2 attached
bpf: vlan3 attached
bpf: vlan4 attached
bpf: vlan5 attached
bpf: vlan6 attached
bpf: vlan7 attached
bpf: vlan8 attached
bpf: vlan9 attached
bpf: vlan10 attached
bpf: vlan11 attached
bpf: vlan12 attached
bpf: vlan13 attached
bpf: vlan14 attached
bpf: vlan15 attached
bpf: vlan16 attached
bpf: vlan17 attached
bpf: vlan18 attached
bpf: vlan19 attached
bpf: vlan20 attached
bpf: vlan21 attached
bpf: vlan22 attached
bpf: vlan23 attached
bpf: vlan24 attached
bpf: vlan25 attached
bpf: vlan26 attached
bpf: vlan27 attached
bpf: vlan28 attached
bpf: vlan29 attached
bpf: vlan30 attached
bpf: vlan31 attached
bpf: vlan32 attached
bpf: vlan33 attached
bpf: vlan34 attached
bpf: vlan35 attached
bpf: vlan36 attached
bpf: vlan37 attached
bpf: vlan38 attached
bpf: vlan39 attached
bpf: vlan40 attached
bpf: vlan41 attached
bpf: vlan42 attached
bpf: vlan43 attached
bpf: vlan44 attached
bpf: vlan45 attached
bpf: vlan46 attached
bpf: vlan47 attached
bpf: vlan48 attached
bpf: vlan49 attached
bpf: vlan50 attached
bpf: vlan51 attached
bpf: vlan52 attached
bpf: vlan53 attached
bpf: vlan54 attached
bpf: vlan55 attached
bpf: vlan56 attached
bpf: vlan57 attached
bpf: vlan58 attached
bpf: vlan59 attached
bpf: vlan60 attached
bpf: vlan61 attached
bpf: vlan62 attached
bpf: vlan63 attached
IP Filter: v3.4.13 initialized. Default = pass all, Logging = enabled
ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable
ata0-master: success setting UDMA2 on PIIX4 chip
Creating DISK ad0
ad0: <IBM-DARA-212000/AR4OA5AA> ATA-4 disk at ata0-master
ad0: 11513MB (23579136 sectors), 23392 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=0
ad0: 11513MB <IBM-DARA-212000> [23392/16/63] at ata0-master UDMA33
ata0-slave: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata0-slave: success setting WDMA2 on PIIX4 chip
acd0: <CD-224E/9.0B> CDROM drive at ata0 as slave
acd0: read 4134KB/s (4134KB/s), 512KB buffer, WDMA2
acd0: Reads: CD-R, CD-DA stream
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0xc, start 63, end = 4188239, size 4188177 : OK
ad0s2: type 0xa5, start 4188240, end = 23572079, size 19383840 : OK
start_init: trying /sbin/init
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?003901c050a8$61540d00$2a67a8c0>