Date: Thu, 8 Mar 2007 16:55:29 -0300 From: "Thiago Lacerda Zago" <tzago@timbrasil.com.br> To: <questions@freebsd.org> Subject: RANCID: End of run not found Message-ID: <AB2A6EB29F90CE43A953453A7533146D03032AB2@RJOCPDMS01.internal.timbrasil.com.br>
next in thread | raw e-mail | index | archive | help
=20 Hi! =20 I=92m new to rancid and I=92ve been trying to config it to run Cisco = Network devices. =20 The problem is that I=92m facing the problem with a Switch as described = below. =20 Cisco Switch Hardware Model: WS-C6506 =20 My .cloginrc file is set correctly. At least I surmise this because I = can run clogin switch001 without problem and log to my device enable = prompt. =20 When I execute the command ./clogin switch001 it works fine. =20 My router.db file is set with the line: switch001:cisco:up =20 When I run rancid-run, and check the log file, I have the following = error: =20 ---------------------------------------------------------- starting: Thu Mar 8 15:00:00 BRT 2007 =20 Trying to get all of the configs. switch001: missed cmd(s): dir /all slavedisk2:,show rsp chassis-info,dir = /all sec-slot2:,show diag,dir /all disk1:,show gsr chassis,dir /all = sec-nvram:,dir /all disk2:,dir /all sec-bootflash:,show spe version,dir = /all slaveslot2:,dir /all disk0:,show install active,show bootvar,dir = /all slaveslot0:,dir /all sec-slot1:,dir /all harddiska:,dir /all = slavenvram:,show flash,dir /all sec-disk2:,dir /all = slavesup-bootflash:,dir /all sec-disk0:,dir /all harddiskb:,show = variables boot,show boot,dir /all slavedisk1:,show env all,show = module,show controllers,show diagbus,dir /all slavedisk0:,show idprom = backplane,dir /all bootflash:,dir /all sec-slot0:,dir /all = sec-disk1:,write term,show vtp status,dir /all sup-bootflash:,dir /all = slot2:,dir /all harddisk:,dir /all slot0:,dir /all sup-microcode:,show = vlan,dir /all slavebootflash:,show controllers cbus,dir /all = slaveslot1:,dir /all nvram:,show version,show redundancy secondary,show = running-config,show c7200,dir /all slot1: switch001: End of run not found ! =20 What could it be the cause of this problem End of run not found =20 I suspect that there might be something with the enable prompt that is = of the form [ sw0001> (enable) ]=20 =20 Please, does anyone have some idea of how I=92ll be able to solve this = problem? =20 Thanks in advance. =20 =20 BR=92s =20 Thiago Zago * HYPERLINK "mailto:tzago@timbrasil.com.br"tzago@timbrasil.com.br=20 =20 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.446 / Virus Database: 268.18.8/714 - Release Date: 8/3/2007 = 10:58 --=20 No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.446 / Virus Database: 268.18.8/714 - Release Date: 8/3/2007 = 10:58 =20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AB2A6EB29F90CE43A953453A7533146D03032AB2>