Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 29 Dec 2003 04:41:46 -0800 (PST)
From:      Edwin Culp <edwinlculp@yahoo.com>
To:        Jamie Clark <jclark@metaparadigm.com>, current@freebsd.org
Subject:   Re: SATA disks on 5.2-CURRENT
Message-ID:  <20031229124146.54407.qmail@web13006.mail.yahoo.com>
In-Reply-To: <3FEF882E.6080800@metaparadigm.com>

next in thread | previous in thread | raw e-mail | index | archive | help

--- Jamie Clark <jclark@metaparadigm.com> wrote:
> Tatsumi Hosokawa wrote:
> 
> >atapci2@pci0:31:2:      class=0x01018f
> card=0x24d11458 chip=0x24d18086 rev=0x02
> >hdr=0x00
> >    vendor   = 'Intel Corporation'
> >    device   = '82801EB (ICH5) SATA Controller'
> >    class    = mass storage
> >    subclass = ATA
> >
> >Disks sometimes work, and sometimes don't work, and
> sometimes the
> >system hangs in boot process (these disks work fine
> on 4.9-RELEASE).
> >  
> >
> FWIW (if a 'me too' is worth anything) I have
> exactly the same problem 
> with my Intel 865PERL mainboard. Same error messages
> as below, almost 
> always hangs on boot. Last tested with -CURRENT
> around 26 Dec.
> My reason for using the SATA channels was because I
> had already fully 
> populated PATA - so using legacy mode was not an
> option. The SATA did 
> work ok in Windows.
> 
> Solution was found in a 3ware controller.

I would like to interpret the above.  Does this mean
that the 8500 series of SATA controlers from 3ware
work under current as is?

Thanks,

ed
> 
> I'd be happy to re-connect and collect some further
> verbose messages if 
> anyone's interested.
> 
> -Jamie
> 
> >Error messages:
> >
> > Case 1:
> >  Dec  7 21:52:02 nekodaisuki kernel: ad4: FAILURE
> - READ_DMA status=51<READY,DSC,ERROR>
> error=40<UNCORRECTABLE>
> >  Dec  7 21:52:02 nekodaisuki kernel: ad6: FAILURE
> - READ_DMA status=51<READY,DSC,ERROR>
> error=10<NID_NOT_FOUND>
> >
> > Case 2:
> >  Dec  8 00:27:48 nekodaisuki kernel: ad4: WARNING
> - READ_DMA recovered from missing interrupt
> >  Dec  8 00:27:48 nekodaisuki kernel: ad4: FAILURE
> - READ_DMA
>
status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR>
> error=0
> >  Dec  8 00:27:48 nekodaisuki kernel: ad4: timeout
> sending command=c8
> >  Dec  8 00:27:48 nekodaisuki kernel: ad4: error
> issuing DMA command
> >  Dec  8 00:27:48 nekodaisuki kernel: ad4: WARNING
> - READ_DMA recovered from missing interrupt
> >  Dec  8 00:27:48 nekodaisuki kernel: ad4: FAILURE
> - READ_DMA
>
status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR>
> error=0
> >
> >  
> >
> 
> _______________________________________________
> freebsd-current@freebsd.org mailing list
>
http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to
"freebsd-current-unsubscribe@freebsd.org"


__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031229124146.54407.qmail>