Date: Wed, 21 Feb 2001 21:18:13 -0500 From: Ralph Dratman <ralph@maxsoft.com> To: "Matthew Emmerton" <matt@gsicomp.on.ca> Cc: <freebsd-questions@FreeBSD.ORG>, Valery Izotov <izotov@gol.ru>, Tait Larson <tait@wego.com>, Ivan Fetch <ivanfetch@technologist.com>, Tim McMillen <timcm@umich.edu> Subject: Re: ata1-master: <MATSHITA cr-581/1c05> CDROM device - NO DRIVER! Message-ID: <v04210103b6ba1d3c4d5b@[192.168.0.27]> In-Reply-To: <009501c09c48$55d31890$1200a8c0@gsicomp.on.ca> References: <000d01c09899$c045ec00$1401a8c0@tedm.placo.com> <v04210101b6b9972bc727@[192.168.0.27]> <009501c09c48$55d31890$1200a8c0@gsicomp.on.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
>Are you sure that you installed your custom kernel?
Yes, the new kernel is announcing its name ("FREEBIE" as in Lehey's
book) at boot time.
>The standard ATA framework will detect any ATA device, but the 'NO DRIVER'
>message is telling you that your kernel doesn't have support for that
>device - which is why I'm wondering if you haven't installed your custom
>kernel.
Unless there's something I don't understand, it is installed. I do
know I'm now booting much faster because there's less scanning for
nonexistent devices that I removed from the configuration file.
Here's the output from dmesg, which now also contains several strange
"config" lines which I don't understand and which might possibly be relevant:
--------------------------------------------------
Rebooting...
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #0: Thu Feb 15 23:53:04 EST 2001
root@www.dratman.com:/usr/src/sys/compile/FREEBIE
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (99.72-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping = 5
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 109051904 (106496K bytes)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di cs0
config> di bt0
No such device: bt0
Invalid command or syntax. Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax. Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax. Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax. Type `?' for help.
config> q
avail memory = 102854656 (100444K bytes)
bios32: Bad BIOS32 Service Directory
Preloaded elf kernel "kernel" at 0xc033c000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc033c09c.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI to ISA bridge (vendor=1045 device=c558)> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <S3 Trio graphics accelerator> at 2.0 irq 11
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0x1000-0x101f irq 11
at device 5.0 on pci0
ed0: address 00:40:33:93:ce:1c, type NE2000 (16 bit)
atapci0: <Generic PCI ATA controller> port 0x1020-0x102f at device 20.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 4126MB <ST34311A> [8944/15/63] at ata0-master WDMA2
ata1-master: <MATSHITA CR-581/1C05> CDROM device - NO DRIVER!
Mounting root from ufs:/dev/ad0s1a
--------------------------------------------------
Any comments?
Thanks in advance.
Regards,
Ralph
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?v04210103b6ba1d3c4d5b>