Date: Wed, 25 Aug 2004 02:57:34 GMT From: Jiafu He <jiafu_he@yahoo.com> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/70926: 5.3Beta-1 bootstrap error: "atapci0: failed: rid 0x20 is memory, requested 4" Message-ID: <200408250257.i7P2vYLQ084853@www.freebsd.org> Resent-Message-ID: <200408250300.i7P30c3j022928@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 70926 >Category: i386 >Synopsis: 5.3Beta-1 bootstrap error: "atapci0: failed: rid 0x20 is memory, requested 4" >Confidential: no >Severity: non-critical >Priority: medium >Responsible: freebsd-i386 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Wed Aug 25 03:00:38 GMT 2004 >Closed-Date: >Last-Modified: >Originator: Jiafu He >Release: 5.3Beta1 >Organization: >Environment: >Description: Actually, Happy to see the progress. Release 5.2.1 ever screwed up the RAID array and destroyed the array info (refer to PR #i386/63828 on 2004/03/06). Now, looks like all is running well. Smooth installation, robust disk access. At least for the moment I didn't see any problem occured. However, the boot message "atapci0: failed: rid 0x20 is memory, requested 4" worries me. Not sure how serious this error is. DMESG is: ===================================================================== Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-BETA1 #0: Sat Aug 21 08:19:34 UTC 2004 root@mack.dcsl.buffalo.edu:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.33-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 1073152000 (1023 MB) avail memory = 1040596992 (992 MB) ACPI APIC Table: <PTLTD APIC > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP): APIC ID: 7 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard ioapic2 <Version 2.0> irqs 48-71 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU (2 Cx states)> on acpi0 cpu1: <ACPI CPU (2 Cx states)> on acpi0 cpu2: <ACPI CPU (2 Cx states)> on acpi0 cpu3: <ACPI CPU (2 Cx states)> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel Generic host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0 pci0: <unknown> at device 0.1 (no driver attached) pcib1: <ACPI PCI-PCI bridge> mem 0xe8000000-0xefffffff at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.HLB_ - AE_NOT_FOUND pci2: <ACPI PCI bus> on pcib2 pci2: <base peripheral, interrupt controller> at device 28.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci2 pci3: <ACPI PCI bus> on pcib3 atapci0: <Promise PDC20619 UDMA133 controller> port 0x2000-0x207f,0x2400-0x240f,0x2080-0x20ff mem 0xda100000-0xda11ffff,0xda120000-0xda120fff irq 24 at device 3.0 on pci3 atapci0: failed: rid 0x20 is memory, requested 4 ata2: channel #0 on atapci0 ata3: channel #1 on atapci0 ata4: channel #2 on atapci0 ata5: channel #3 on atapci0 pci2: <base peripheral, interrupt controller> at device 30.0 (no driver attached) pcib4: <ACPI PCI-PCI bridge> at device 31.0 on pci2 pci4: <ACPI PCI bus> on pcib4 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1840-0x185f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1: NEC Corporation USB2.0 Hub Controller, class 9/0, rev 2.00/1.00, addr 2 uhub1: 4 ports with 4 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1860-0x187f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1880-0x189f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib5 pci5: <multimedia, audio> at device 1.0 (no driver attached) fwohci0: <Texas Instruments TSB43AB22/A> mem 0xda200000-0xda203fff,0xda204000-0xda2047ff irq 17 at device 2.0 on pci5 fwohci0: [GIANT-LOCKED] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:e0:81:00:00:20:15:bf fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:e0:81:20:15:bf fwe0: Ethernet address: 02:e0:81:20:15:bf sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0x3040-0x307f mem 0xda220000-0xda23ffff irq 16 at device 3.0 on pci5 em0: [GIANT-LOCKED] em0: Ethernet address: 00:e0:81:51:1f:10 em0: Speed:N/A Duplex:N/A isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH4 UDMA100 controller> port 0x18a0-0x18af,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci1 ata1: channel #1 on atapci1 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <multimedia, audio> at device 31.5 (no driver attached) acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 plip0: <PLIP network interface> on ppbus0 orm0: <ISA Option ROM> at iomem 0xe0000-0xe3fff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec em0: Link is up 100 Mbps Full Duplex ATAPI_RESET time = 3000us acd0: DVDR <GENERIC DVD DUAL 4XMax/2.17> at ata0-master UDMA33 ad4: 117246MB <Maxtor 6Y120P0/YAR41BW0> [238216/16/63] at ata2-master UDMA133 ad6: 117246MB <Maxtor 6Y120L0/YAR41VW0> [238216/16/63] at ata3-master UDMA133 ad8: 117246MB <Maxtor 6Y120L0/YAR41VW0> [238216/16/63] at ata4-master UDMA133 ad10: 117246MB <Maxtor 6Y120L0/YAR41VW0> [238216/16/63] at ata5-master UDMA133 ar0: 232696MB <ATA RAID0+1 array> [29664/255/63] status: READY subdisks: disk0 READY on ad4 at ata2-master disk1 READY on ad6 at ata3-master disk2 READY on ad8 at ata4-master disk3 READY on ad10 at ata5-master SMP: AP CPU #2 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! Mounting root from ufs:/dev/ar0s2a em0: Link is up 100 Mbps Full Duplex ===================================================================== >How-To-Repeat: Insert release 5.3Beta-1 disk 1 and error will show up. >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200408250257.i7P2vYLQ084853>