Date: Sat, 5 Sep 1998 15:21:12 +0400 From: "Sergei M.Klimkin" <serega@elkatel.ru> To: <freebsd-questions@FreeBSD.ORG> Subject: a ppp -question Message-ID: <01bdd8bf$4b0f77e0$0100a8c0@ondorm.elkatel.ru>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. ------=_NextPart_000_0004_01BDD8E0.D22117E0 Content-Type: text/plain; charset="koi8-r" Content-Transfer-Encoding: quoted-printable Hi there! I've got some trouble with ppp I did all setting as you discribe in Handbook! comp# ppp ppp on comp>dial elkatel -that is my ISP dial ok login ok ppp on comp>packet mode But nothing work! In my log file I foung only one error! Following lines taked after login ok! tun0: Connect: annex:=20 tun0: Chat: Sending: ppp^M=20 tun0: IPCP: Using trigger address 0.0.0.0=20 tun0: LCP: State change Initial --> Closed=20 tun0: LCP: State change Closed --> Stopped=20 tun0: LCP: Received Configure Request (1) state =3D Stopped (3)=20 tun0: LCP: ACCMAP[6] 0x00000000=20 tun0: LCP: AUTHPROTO[4] 0xc023 (PAP)=20 tun0: LCP: MAGICNUM[6] 0x0ea7494b=20 tun0: LCP: PROTOCOMP[2]=20 tun0: LCP: ACFCOMP[2]=20 tun0: LCP: LcpSendConfigReq=20 tun0: LCP: ACFCOMP[2]=20 tun0: LCP: PROTOCOMP[2]=20 tun0: LCP: ACCMAP[6] 0x00000000=20 tun0: LCP: MRU[4] 1500=20 tun0: LCP: MAGICNUM[6] 0x34eae06e=20 tun0: LCP: SendConfigAck(Stopped)=20 tun0: LCP: ACCMAP[6] 0x00000000=20 tun0: LCP: AUTHPROTO[4] 0xc023 (PAP)=20 tun0: LCP: MAGICNUM[6] 0x0ea7494b=20 tun0: LCP: PROTOCOMP[2]=20 tun0: LCP: ACFCOMP[2]=20 tun0: LCP: State change Stopped --> Ack-Sent=20 tun0: LCP: Received Configure Ack (1) state =3D Ack-Sent (8)=20 tun0: LCP: State change Ack-Sent --> Opened=20 tun0: LCP: LcpLayerUp=20 tun0: Phase: NewPhase: Authenticate=20 tun0: Phase: his =3D PAP, mine =3D none=20 tun0: Phase: PAP: serega=20 tun0: Phase: PapInput: ACK=20 tun0: Phase: Received PAP_ACK ()=20 tun0: Phase: NewPhase: Network=20 tun0: IPCP: State change Initial --> Closed=20 tun0: IPCP: IPCP Up event!!=20 tun0: IPCP: IpcpSendConfigReq=20 tun0: IPCP: IPADDR[6] 0.0.0.0=20 tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compres=20 tun0: IPCP: State change Closed --> Req-Sent=20 tun0: CCP: State change Initial --> Closed=20 tun0: CCP: CCP Up event!!=20 tun0: CCP: CcpSendConfigReq=20 tun0: CCP: DEFLATE[4] win 15=20 tun0: CCP: PRED1[2]=20 tun0: CCP: State change Closed --> Req-Sent=20 tun0: IPCP: Received Configure Request (3) state =3D Req-Sent (6)=20 tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression=20 tun0: IPCP: IPADDR[6] 195.18.32.4=20 tun0: IPCP: SendConfigAck(Req-Sent)=20 tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression=20 tun0: IPCP: IPADDR[6] 195.18.32.4=20 tun0: IPCP: State change Req-Sent --> Ack-Sent=20 tun0: Phase: Unknown protocol 0x802b (Novell IPX Control Protocol)=20 tun0: LCP: LcpSendProtoRej=20 tun0: IPCP: Received Configure Nak (1) state =3D Ack-Sent (8)=20 tun0: IPCP: IPADDR[6] 195.18.34.23=20 tun0: IPCP: IPADDR[6] changing address: 0.0.0.0 --> 195.18.34.23=20 tun0: IPCP: IpcpSendConfigReq=20 tun0: IPCP: IPADDR[6] 195.18.34.23=20 tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compres=20 tun0: CCP: Received Configure Reject (1) state =3D Req-Sent (6)=20 tun0: CCP: RecvConfigRej.=20 tun0: CCP: DEFLATE[4]=20 tun0: CCP: CcpSendConfigReq=20 tun0: CCP: PRED1[2]=20 tun0: IPCP: Received Configure Ack (2) state =3D Ack-Sent (8)=20 tun0: IPCP: State change Ack-Sent --> Opened=20 tun0: IPCP: IpcpLayerUp(9).=20 tun0: IPCP: myaddr =3D 195.18.34.23 hisaddr =3D 195.18.32.4=20 tun0: LCP: OsLinkup: 195.18.32.4=20 tun0: Command: elkatel: delete ALL=20 tun0: Command: elkatel: add 0 0 HISADDR=20 tun0: CCP: Received Configure Ack (2) state =3D Req-Sent (6)=20 tun0: CCP: State change Req-Sent --> Ack-Rcvd=20 tun0: CCP: Received Terminate Request (5) state =3D Ack-Rcvd (7)=20 tun0: CCP: CcpSendTerminateAck=20 tun0: CCP: State change Ack-Rcvd --> Req-Sent=20 tun0: Phase: HDLC errors -> FCS: 16 ADDR: 0 COMD: 0 PROTO: 1 -What's = that mean???? tun0: Phase: HDLC errors -> FCS: 5 ADDR: 0 COMD: 0 PROTO: 0 -What's = that mean???? tun0: Phase: HDLC errors -> FCS: 15 ADDR: 0 COMD: 0 PROTO: 0 -What's = that mean???? tun0: Phase: Idle timer expired.=20 tun0: Phase: NewPhase: Terminate=20 tun0: IPCP: OsLinkdown: 195.18.32.4=20 tun0: IPCP: IpcpLayerDown.=20 tun0: IPCP: Connect time: 237 secs: 0 octets in, 1596 octets out=20 tun0: IPCP: total 6 bytes/sec=20 tun0: IPCP: State change Opened --> Starting=20 tun0: CCP: State change Req-Sent --> Starting=20 tun0: Command: MYADDR: !bg /usr/X11R6/bin/auplay /etc/ppp/linkdown.au=20 tun0: LCP: LcpLayerDown=20 tun0: LCP: SendTerminateReq.=20 tun0: LCP: State change Opened --> Closing=20 tun0: LCP: Received Terminate Ack (2) state =3D Closing (4)=20 tun0: LCP: State change Closing --> Closed=20 tun0: LCP: LcpLayerFinish=20 tun0: Phase: Modem: Connect time: 308 secs: 9310 octets in, 2023 octets = out=20 tun0: Phase: total 36 bytes/sec=20 tun0: Phase: NewPhase: Dead=20 tun0: IPCP: Using trigger address 0.0.0.0=20 tun0: Command: quit=20 tun0: Phase: PPP Terminated (normal). Help me in that possible! Thanks ------=_NextPart_000_0004_01BDD8E0.D22117E0 Content-Type: text/html; charset="koi8-r" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN"> <HTML> <HEAD> <META content=3Dtext/html;charset=3Dkoi8-r http-equiv=3DContent-Type> <META content=3D'"MSHTML 4.71.1712.3"' name=3DGENERATOR> </HEAD> <BODY bgColor=3D#c0c0c0> <DIV><FONT color=3D#000000 size=3D2>Hi there!</FONT></DIV> <DIV><FONT size=3D2>I've got some trouble with ppp</FONT></DIV> <DIV><FONT size=3D2>I did all setting as you discribe in=20 Handbook!</FONT> </DIV> <DIV><FONT color=3D#000000 size=3D2></FONT> </DIV> <DIV><FONT color=3D#000000 size=3D2>comp# ppp</FONT></DIV> <DIV><FONT color=3D#000000 size=3D2>ppp on comp>dial=20 elkatel -that is my ISP</FONT> </DIV> <DIV><FONT color=3D#000000 size=3D2></FONT><FONT size=3D2>dial = ok</FONT></DIV> <DIV><FONT size=3D2>login ok</FONT></DIV> <DIV><FONT size=3D2>ppp on comp>packet mode</FONT> </DIV> <DIV><FONT size=3D2></FONT><FONT color=3D#000000 size=3D2>But nothing=20 work!</FONT></DIV> <DIV><FONT color=3D#000000 size=3D2></FONT> </DIV> <DIV><FONT size=3D2>In my log file I foung only one error!</FONT></DIV> <DIV><FONT size=3D2></FONT><FONT color=3D#000000 size=3D2>Following = lines taked after=20 login ok!<BR></FONT><FONT color=3D#000000 size=3D2></FONT> </DIV> <DIV><FONT color=3D#000000 size=3D2>tun0: Connect: annex: <BR>tun0: = Chat: Sending:=20 ppp^M <BR>tun0: IPCP: Using trigger address 0.0.0.0 <BR>tun0: LCP: State = change=20 Initial --> Closed <BR>tun0: LCP: State change Closed --> Stopped=20 <BR>tun0: LCP: Received Configure Request (1) state =3D Stopped (3) = <BR>tun0:=20 LCP: ACCMAP[6] 0x00000000 <BR>tun0: LCP: AUTHPROTO[4] 0xc023 = (PAP)=20 <BR>tun0: LCP: MAGICNUM[6] 0x0ea7494b <BR>tun0: LCP: = PROTOCOMP[2]=20 <BR>tun0: LCP: ACFCOMP[2] <BR>tun0: LCP: LcpSendConfigReq = <BR>tun0:=20 LCP: ACFCOMP[2] <BR>tun0: LCP: PROTOCOMP[2] <BR>tun0: = LCP: =20 ACCMAP[6] 0x00000000 <BR>tun0: LCP: MRU[4] 1500 <BR>tun0: = LCP: =20 MAGICNUM[6] 0x34eae06e <BR>tun0: LCP: SendConfigAck(Stopped) <BR>tun0:=20 LCP: ACCMAP[6] 0x00000000 <BR>tun0: LCP: AUTHPROTO[4] 0xc023 = (PAP)=20 <BR>tun0: LCP: MAGICNUM[6] 0x0ea7494b <BR>tun0: LCP: = PROTOCOMP[2]=20 <BR>tun0: LCP: ACFCOMP[2] <BR>tun0: LCP: State change Stopped = -->=20 Ack-Sent <BR>tun0: LCP: Received Configure Ack (1) state =3D Ack-Sent = (8)=20 <BR>tun0: LCP: State change Ack-Sent --> Opened <BR>tun0: LCP: = LcpLayerUp=20 <BR>tun0: Phase: NewPhase: Authenticate <BR>tun0: Phase: his =3D = PAP, mine =3D=20 none <BR>tun0: Phase: PAP: serega <BR>tun0: Phase: PapInput: ACK = <BR>tun0:=20 Phase: Received PAP_ACK () <BR>tun0: Phase: NewPhase: Network <BR>tun0: = IPCP:=20 State change Initial --> Closed <BR>tun0: IPCP: IPCP Up event!! = <BR>tun0:=20 IPCP: IpcpSendConfigReq <BR>tun0: IPCP: IPADDR[6] 0.0.0.0 = <BR>tun0:=20 IPCP: COMPPROTO[6] 16 VJ slots with slot compres <BR>tun0: IPCP: = State=20 change Closed --> Req-Sent <BR>tun0: CCP: State change Initial --> = Closed=20 <BR>tun0: CCP: CCP Up event!! <BR>tun0: CCP: CcpSendConfigReq <BR>tun0:=20 CCP: DEFLATE[4] win 15 <BR>tun0: CCP: PRED1[2] <BR>tun0: = CCP: State=20 change Closed --> Req-Sent <BR>tun0: IPCP: Received Configure Request = (3)=20 state =3D Req-Sent (6) <BR>tun0: IPCP: COMPPROTO[6] 16 VJ = slots with=20 slot compression <BR>tun0: IPCP: IPADDR[6] 195.18.32.4 = <BR>tun0:=20 IPCP: SendConfigAck(Req-Sent) <BR>tun0: IPCP: COMPPROTO[6] = 16 VJ=20 slots with slot compression <BR>tun0: IPCP: IPADDR[6] = 195.18.32.4=20 <BR>tun0: IPCP: State change Req-Sent --> Ack-Sent <BR>tun0: Phase: = Unknown=20 protocol 0x802b (Novell IPX Control Protocol) <BR>tun0: LCP: = LcpSendProtoRej=20 <BR>tun0: IPCP: Received Configure Nak (1) state =3D Ack-Sent (8) = <BR>tun0:=20 IPCP: IPADDR[6] 195.18.34.23 <BR>tun0: IPCP: = IPADDR[6] =20 changing address: 0.0.0.0 --> 195.18.34.23 <BR>tun0: IPCP:=20 IpcpSendConfigReq <BR>tun0: IPCP: IPADDR[6] 195.18.34.23 <BR>tun0: = IPCP: COMPPROTO[6] 16 VJ slots with slot compres <BR>tun0: CCP: = Received=20 Configure Reject (1) state =3D Req-Sent (6) <BR>tun0: CCP: = RecvConfigRej.=20 <BR>tun0: CCP: DEFLATE[4] <BR>tun0: CCP: CcpSendConfigReq = <BR>tun0:=20 CCP: PRED1[2] <BR>tun0: IPCP: Received Configure Ack (2) state =3D = Ack-Sent=20 (8) <BR>tun0: IPCP: State change Ack-Sent --> Opened <BR>tun0: IPCP:=20 IpcpLayerUp(9). <BR>tun0: IPCP: myaddr =3D 195.18.34.23 = hisaddr =3D=20 195.18.32.4 <BR>tun0: LCP: OsLinkup: 195.18.32.4 <BR>tun0: Command: = elkatel:=20 delete ALL <BR>tun0: Command: elkatel: add 0 0 HISADDR <BR>tun0: CCP: = Received=20 Configure Ack (2) state =3D Req-Sent (6) <BR>tun0: CCP: State change = Req-Sent=20 --> Ack-Rcvd <BR>tun0: CCP: Received Terminate Request (5) state =3D = Ack-Rcvd=20 (7) <BR>tun0: CCP: CcpSendTerminateAck <BR>tun0: CCP: State change = Ack-Rcvd=20 --> Req-Sent <BR>tun0: Phase: HDLC errors -> FCS: 16 ADDR: 0 COMD: = 0=20 PROTO: 1 -What's that mean????<BR>tun0: Phase: HDLC errors -> = FCS: 5=20 ADDR: 0 COMD: 0 PROTO: 0 -What's that = mean????<BR>tun0: Phase:=20 HDLC errors -> FCS: 15 ADDR: 0 COMD: 0 PROTO: 0 -What's = that=20 mean????<BR>tun0: Phase: Idle timer expired. <BR>tun0: Phase: NewPhase:=20 Terminate <BR>tun0: IPCP: OsLinkdown: 195.18.32.4 <BR>tun0: IPCP: = IpcpLayerDown.=20 <BR>tun0: IPCP: Connect time: 237 secs: 0 octets in, 1596 octets out = <BR>tun0:=20 IPCP: total 6 bytes/sec <BR>tun0: IPCP: State change Opened --> = Starting <BR>tun0: CCP: State change Req-Sent --> Starting <BR>tun0: = Command:=20 MYADDR: !bg /usr/X11R6/bin/auplay /etc/ppp/linkdown.au <BR>tun0: LCP:=20 LcpLayerDown <BR>tun0: LCP: SendTerminateReq. <BR>tun0: LCP: State = change Opened=20 --> Closing <BR>tun0: LCP: Received Terminate Ack (2) state =3D = Closing (4)=20 <BR>tun0: LCP: State change Closing --> Closed <BR>tun0: LCP: = LcpLayerFinish=20 <BR>tun0: Phase: Modem: Connect time: 308 secs: 9310 octets in, 2023 = octets out=20 <BR>tun0: Phase: total 36 bytes/sec <BR>tun0: Phase: NewPhase: = Dead=20 <BR>tun0: IPCP: Using trigger address 0.0.0.0 <BR>tun0: Command: quit = <BR>tun0:=20 Phase: PPP Terminated (normal).</FONT> </DIV> <DIV><FONT color=3D#000000 size=3D2></FONT> </DIV> <DIV><FONT size=3D2>Help me in that = possible!<BR>Thanks</FONT> </DIV> <DIV><FONT size=3D2></FONT> </DIV></BODY></HTML> ------=_NextPart_000_0004_01BDD8E0.D22117E0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01bdd8bf$4b0f77e0$0100a8c0>