Date: Sun, 04 Mar 2007 09:40:32 -0800 From: Garrett Cooper <youshi10@u.washington.edu> To: freebsd-questions@freebsd.org Subject: Re: Sony DRU-820A DVD-RW RAM Drive Message-ID: <45EB0490.8040703@u.washington.edu> In-Reply-To: <45EB023B.2030104@u.washington.edu> References: <200703041013.38470.bulk_mail@siegel-tech.net> <45EB023B.2030104@u.washington.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
Garrett Cooper wrote: > Aaron Siegel wrote: >> Hello >> >> Cannot >> read or play audio cdrom disks. run the Windows install for Win4BSD >> the install worked worked with a standard cdrom drive >> >> Can >> burn CD-R (with cdrecord dev=1,0,0) >> burn DVD-RW (with mkisofs) >> play Movie dvds. >> read dvd disks >> read data cdrom disks >> >> I am using 6.1 Release. >> >> /boot/loader.conf >> atapicam_load="YES" >> hw.ata.ata_dma="1" >> hw.ata.atapi_dma="1" >> >> I have set the mode for the device to UDMA33 from UDMA66. >> How can I set this up so the drive boots as UDMA33? Do I add the >> following line into the device.hints: >> hint.cd.0.mode="UDMA33"? >> >> acd0: DVDR <DVD RW DRU-820A/1.0b> at ata1-master UDMA66 >> cd0 at ata1 bus 0 target 0 lun 0 >> cd0: <SONY DVD RW DRU-820A 1.0b> Removable CD-ROM SCSI-0 device cd0: >> 66.000MB/s transfers >> >> >> I am receiving a following errors while booting >> cd0: cd present [309837 x 2048 byte records] >> (cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 2 0 >> (cd0:ata1:0:0:0): CAM Status: SCSI Status Error >> (cd0:ata1:0:0:0): SCSI Status: Check Condition >> (cd0:ata1:0:0:0): ILLEGAL REQUEST csi:0,0,21,0 asc:64,0 >> (cd0:ata1:0:0:0): Illegal mode for this track >> (cd0:ata1:0:0:0): Unretryable error >> (cd0:ata1:0:0:0): cddone: got error 0x6 back >> >> The errors when playing a DVD >> (cd0:ata1:0:0:0): Vendor Specific Command. CDB: a4 0 0 31 12 fb 0 0 0 >> c c4 0 (cd0:ata1:0:0:0): CAM Status: SCSI Status Error >> (cd0:ata1:0:0:0): SCSI Status: Check Condition >> (cd0:ata1:0:0:0): ILLEGAL REQUEST asc:6f,4 >> (cd0:ata1:0:0:0): Reserved ASC/ASCQ pair >> (cd0:ata1:0:0:0): Unretryable error >> (cd0:ata1:0:0:0): Vendor Specific Command. CDB: a4 0 0 31 13 4e 0 0 0 >> c c4 0 (cd0:ata1:0:0:0): CAM Status: SCSI Status Error >> (cd0:ata1:0:0:0): SCSI Status: Check Condition >> (cd0:ata1:0:0:0): ILLEGAL REQUEST asc:6f,4 >> (cd0:ata1:0:0:0): Reserved ASC/ASCQ pair >> (cd0:ata1:0:0:0): Unretryable error >> (cd0:ata1:0:0:0): Vendor Specific Command. CDB: a4 0 0 31 45 f0 0 0 0 >> c c4 0 (cd0:ata1:0:0:0): CAM Status: SCSI Status Error >> (cd0:ata1:0:0:0): SCSI Status: Check Condition >> (cd0:ata1:0:0:0): ILLEGAL REQUEST asc:6f,4 >> (cd0:ata1:0:0:0): Reserved ASC/ASCQ pair >> (cd0:ata1:0:0:0): Unretryable error >> (cd0:ata1:0:0:0): Vendor Specific Command. CDB: a4 0 0 31 9e 34 0 0 0 >> c c4 0 (cd0:ata1:0:0:0): CAM Status: SCSI Status Error >> (cd0:ata1:0:0:0): SCSI Status: Check Condition >> (cd0:ata1:0:0:0): ILLEGAL REQUEST asc:6f,4 >> (cd0:ata1:0:0:0): Reserved ASC/ASCQ pair >> (cd0:ata1:0:0:0): Unretryable error >> >> Thank you >> Aaron > > The question is, how are you trying to read the audio information on the > disk(s). > -Garrett PS You can't mount audio CDs, if that's what you're trying to do... you have to play them directly from a media player of some kind (xmms, audacious, etc). -Garrett
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?45EB0490.8040703>