Date: Fri, 14 Jul 2000 11:41:20 -0500 From: "Daniel Schrock" <djab@enteract.com> To: <freebsd-questions@freebsd.org> Subject: buildworld failing- ideas how to fix it? Message-ID: <007201bfedb2$56dcb650$e6a9e5cf@chico>
next in thread | raw e-mail | index | archive | help
I'm trying to update one of my servers, but buildworld keeps failing.
(Sorry about the length of this post but I want to be as complete as
possible)
Here is the failed output:
===> usr.sbin/lptcontrol
rm -f .depend
mkdep -f .depend -a -I/usr/obj/usr/src/i386/usr/include
/usr/src/usr.sbin/lptcontrol/lptcontrol.c
/usr/src/usr.sbin/lptcontrol/lptcontrol.c:45: dev/ppbus/lptio.h: No such
file or directory
mkdep: compile failed
*** Error code 1
Stop in /usr/src/usr.sbin/lptcontrol.
*** Error code 1
Stop in /usr/src/usr.sbin.
*** Error code 1
Stop in /usr/src.
*** Error code 1
Stop in /usr/src.
*** Error code 1
Stop in /usr/src.
i've tried adding a flag to bypass but neither worked.
tried thus far:
make -DNOPERL buildworld
make -DNOPERL -DNOPPBUS buildworld
make -DNOPERL -DNOLPT buildworld
all have failed (the -DNOPERL is required by my systems)
I managed to update a different system and never got an error from the ppbus
so I'm not sure why this one is failing but the other didn't.
Anyone have any idea how to fix this?
here is the dmesg output from the system thats failing:
[webserv][/usr/home/d_jab]
[d_jab]>dmesg
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #0: Tue Jun 27 17:01:47 CDT 2000
d_jab@webserv.anonymous-daemon.org:/usr/src/sys/compile/WEBSERV1
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon (501.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x672 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory = 134217728 (131072K bytes)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> di aic0
config> di aha0
config> di adv0
config> en le0
config> po le0 0x300
config> ir le0 5
config> iom le0 0xe0000
config> f le0 0
config> q
avail memory = 126193664 (123236K bytes)
Preloaded elf kernel "kernel" at 0xc03bf000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03bf09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GB graphics accelerator> at 0.0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2
chip1: <Intel 82371AB Power management controller> port 0x440-0x44f at
device 7.3 on pci0
dc0: <82c169 PNIC 10/100BaseTX> port 0xe800-0xe8ff mem 0xfebfff00-0xfebfffff
irq 10 at device 17.0 on pci0
dc0: Ethernet address: 00:a0:cc:55:14:75
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: supplying EUI64: 00:a0:cc:ff:fe:55:14:75
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
ad0: 6149MB <Maxtor 90640D4> [13328/15/63] at ata0-master using UDMA33
ad3: 3020MB <WDC AC33100H> [6136/16/63] at ata1-slave using WDMA2
acd0: CDROM <ATAPI CD-ROM DRIVE 40X MAX> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a
dc0: starting DAD for fe80:0001::02a0:ccff:fe55:1475
dc0: DAD complete for fe80:0001::02a0:ccff:fe55:1475 - no duplicates found
Any help would be appreciated.
Once again, sorry about the length, but I wanted to be thorough.
Thanks in adavnce.
Daniel Schrock
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?007201bfedb2$56dcb650$e6a9e5cf>