Date: Wed, 24 Nov 1999 21:44:02 -0500 (EST) From: Jacob DeGlopper <jacob@mayhem.com> To: freebsd-scsi@freebsd.org Cc: freebsd-questions@freebsd.org Subject: Re: SCSI/CAM errors with Yamaha CRW6416sz CD-RW and NCR 815 card Message-ID: <199911250244.VAA00378@mayhem.com> In-Reply-To: From jacob at "Nov 23, 1999 4:25:22 pm"
next in thread | raw e-mail | index | archive | help
Followup on this problem. I have an Adaptec 2940 SCSI card on the way, which seems to be more of a standard, but maybe that's not the problem. I discovered that if there is no CD in the drive when I boot FreeBSD, it works fine. What does that indicate? cd0 at ncr0 bus 0 target 2 lun 0 cd0: <YAMAHA CRW6416S 1.0b> Removable CD-ROM SCSI2 device cd0: 10.0MB/s transfers (10.0MHz, offset 8) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray c losed Put a CD in, and you can mount it just fine and use it. Leave the CD in when you reboot, and it locks up with the same NCR timeout errors I was seeing below. > I am running FreeBSD 3.0-RELEASE. I have recently acquired a Yamaha > CRZ6416sz SCSI CD-RW drive. I have an existing SCSI chain with a > NCR 815 card, Seagate disk, and HP DAT drive; all those have been > working fine. > > When booting the system with the new drive installed, I get some errors, > and then the system halts. Running a kernel without the SCSI cd device > configured gets the CD-ROM recognized by the pass driver without errors. > > I have double-checked the terminator, and tried other SCSI ids with no > change. The drive appears to work fine in Windows. I have also tried > adjusting the SCSI_DELAY timeout up to 20 seconds with no change. > > The specific errors I get are: > > cd0:ncr0:0:2:0: got CAM status 0x4a > fatal error, failed to attach to device (cd0:ncr0:0:2:0) removing device > entry > > then, I get the message > > ncr0: timeout nccb=<something> (skip) > > I've also tried the drive in another FreeBSD system with an NCR 875 card, > and it failed with the same messages, as did booting with the 3.3 boot > disks. > > I haven't found anything very promising in the archives related to these > NCR timeout problems; does anyone have any ideas, or do I have to > go out and get a more expensive SCSI card? -- Jacob DeGlopper, FF/EMT-B, N3RHI jacob@mayhem.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199911250244.VAA00378>